cannabis420420
Well-Known Member
1. Items needed: two buckets (5-gallon is used for this demonstration), electric whisk or powerdrill with paint-mixer attachment, ice & water.
2. Place your plant material into a bucket.
3. Fill the bucket to a few inches from the top with cold water.
4. Add in one bag of ice cubes or a few trays from your freezer.
5. Agitate for 15 to 30 minutes with an electric whisk or a power drill with a paint mixing attachment.
6. Get ready to lift out the 220u bag. Let the bucket settle for 30 minutes, stirring every few minutes. Let it settle in a cold place if possible (back in the freezer).
7. This will hold the plant material-- the water with good stuff will drain through to the next filter bag. You should re-rinse this plant material and filter it again. You can also run the same plant material a second time through the whole process for a reduced yield.
8. Now the first filtering is done at 190u.
9. This is basically a waste product.
10. It may contain plant essences useful for your needs.
11. By using the unique filtration kits 190u filter, this contaminate is removed from your final product. This filtering is what makes it so pure.
12. The second filter step is 160u.
13. Some people call it a filtering step...
14. But this will dry out to useable material. It's not nearly as good as what's coming up though.
15. Starting with this bag, they will take a while to drain.
16. This is the new 45u bag.
17. Finally the 25u.
18. This bag will take a long time to drain if you have a good amount of product. Agitate the bag and milk it at the end.
19. The final pure product from your filtration kits.and scrap it all up and press it and u got bubble hash
2. Place your plant material into a bucket.
3. Fill the bucket to a few inches from the top with cold water.
4. Add in one bag of ice cubes or a few trays from your freezer.
5. Agitate for 15 to 30 minutes with an electric whisk or a power drill with a paint mixing attachment.
6. Get ready to lift out the 220u bag. Let the bucket settle for 30 minutes, stirring every few minutes. Let it settle in a cold place if possible (back in the freezer).
7. This will hold the plant material-- the water with good stuff will drain through to the next filter bag. You should re-rinse this plant material and filter it again. You can also run the same plant material a second time through the whole process for a reduced yield.
8. Now the first filtering is done at 190u.
9. This is basically a waste product.
10. It may contain plant essences useful for your needs.
11. By using the unique filtration kits 190u filter, this contaminate is removed from your final product. This filtering is what makes it so pure.
12. The second filter step is 160u.
13. Some people call it a filtering step...
14. But this will dry out to useable material. It's not nearly as good as what's coming up though.
15. Starting with this bag, they will take a while to drain.
16. This is the new 45u bag.
17. Finally the 25u.
18. This bag will take a long time to drain if you have a good amount of product. Agitate the bag and milk it at the end.
19. The final pure product from your filtration kits.and scrap it all up and press it and u got bubble hash
