PICOGRAV
Well-Known Member
Let me hold a few of them seeds...
Hear Ye- Hear Ye LED Tubes + HH Spray 2.0 + BrandX Seeds
- Thread starter PetFlora
- Start date
PSUAGRO.
Well-Known Member
When did bubblegum ever test around 30% thc? That's an insane number which is BS IMO,I smoked the original in Amsterdam, forget the cafe that claims it though....anyways wasn't that strong, flow (Dutch ak47?) fucked me up way more
How is poly doing anyways pet? Never comes around anymore
How is poly doing anyways pet? Never comes around anymore
PetFlora
Well-Known Member
PSU, Poly is in-between stages of life, so...
Pics or it didn't happen, Right? Well, the G13 beast is blowin my mind, and the rest are doing pretty good, too. That's her in pic #1 at ~ 2 o'clock
There are a few chinks in using the HHs over 3 plants. It's hard to get the nutes close to the main stalk without pushing the stem aside
I find it necessary to raise the main feeder tube up highr than the Rings, otherwise the drops do not make it to the ends of the rings
Pics or it didn't happen, Right? Well, the G13 beast is blowin my mind, and the rest are doing pretty good, too. That's her in pic #1 at ~ 2 o'clock
There are a few chinks in using the HHs over 3 plants. It's hard to get the nutes close to the main stalk without pushing the stem aside
I find it necessary to raise the main feeder tube up highr than the Rings, otherwise the drops do not make it to the ends of the rings
PetFlora
Well-Known Member
Someone asked about this on another thread, but I forgot to comment, so in case you are subbed...
No white spots here, other than a bit of mineral residue from foliar spray. I add a few drops of PHS (Pink Himalayan Salt) for the minerals. When it dries sometimes the minerals collect
Leafs only look light green under the leds. See my last thread for that 411
No white spots here, other than a bit of mineral residue from foliar spray. I add a few drops of PHS (Pink Himalayan Salt) for the minerals. When it dries sometimes the minerals collect
Leafs only look light green under the leds. See my last thread for that 411
PetFlora
Well-Known Member
Here's my new version of Flooming Rez using HH Ring + 160 gph pump
A little hard to see but on the right hand side water is cascading over the lip splashing into the water line
I picked up a second Cree 4000K, so 2 @4000K +1 @3000K + one 12w WW RP Philips + 80w of tubes. 2 tubes are just above the bottom of the globes, the other 2 are higher up in the tent only because I need to get another pulley
and for Chronikool a partial weigh in. Pretty dry, took to a friend I owe. The rest has been in a large paper bag hangin in the closet since 8/26
A little hard to see but on the right hand side water is cascading over the lip splashing into the water line
I picked up a second Cree 4000K, so 2 @4000K +1 @3000K + one 12w WW RP Philips + 80w of tubes. 2 tubes are just above the bottom of the globes, the other 2 are higher up in the tent only because I need to get another pulley
and for Chronikool a partial weigh in. Pretty dry, took to a friend I owe. The rest has been in a large paper bag hangin in the closet since 8/26
PetFlora
Well-Known Member
PICOG,
You certainly could do a single bucket grow with it. I am doing so with my reveg, but I developed it with outboard rez in mind. I am getting ready to move the reveg out of my small tent. Will take pics once it is reset
reveg lost a bit due to me over-trimming her roots + no direct light most of yesterday. She is now by herself upstairs, but not for long the way the babies are growing
Since babies are growing so fast I took a couple pics- the close up is the Beast. Let's call her Sophia
You certainly could do a single bucket grow with it. I am doing so with my reveg, but I developed it with outboard rez in mind. I am getting ready to move the reveg out of my small tent. Will take pics once it is reset
reveg lost a bit due to me over-trimming her roots + no direct light most of yesterday. She is now by herself upstairs, but not for long the way the babies are growing
Since babies are growing so fast I took a couple pics- the close up is the Beast. Let's call her Sophia
PetFlora
Well-Known Member
OK the final energy tweak is magnets. Until I get the plants into the net pot lids there is no way to place them. And I 'need 6 per plant, that adds up, but...
I think I can accomplish the same result for all plants by passing the feeder tube (as it comes out of the riser) through 2 opposing force magnets.
I did this to both set ups at 6pm
Pics tomorrow
I think I can accomplish the same result for all plants by passing the feeder tube (as it comes out of the riser) through 2 opposing force magnets.
I did this to both set ups at 6pm
Pics tomorrow
PetFlora
Well-Known Member
This is the genetics and back story on seeds Polyarcturus sent me
Not my area of expertise. Anybody care to chime in?
bubblegum female, X blue cheese #2 x bubblegum male, which makes it a first generation backcross (bx1)
Bc#2 x bgum is the F1 male I made by crossing those 2 strains then I crossed it back with bgum
Not my area of expertise. Anybody care to chime in?
bubblegum female, X blue cheese #2 x bubblegum male, which makes it a first generation backcross (bx1)
Bc#2 x bgum is the F1 male I made by crossing those 2 strains then I crossed it back with bgum
PetFlora
Well-Known Member
G13 x seeds cracked on 8/6: WH x started later, cracked on 8/9
Alas, beta led not ready for me, probably a few weeks
Due to fast growth, I need to move 3 of the babies to the HOT5 tent ASAP. Starting with 2 Quantum Grow bulbs + 2 UVL Aquasuns
I ordered 2 more HH Rings, + 2 @ 250 gph pumps. Hopefully order will be here Friday.
Also need another 15g tote for upstairs rez to be 100%
I may cobble something together in the mean time
Alas, beta led not ready for me, probably a few weeks
Due to fast growth, I need to move 3 of the babies to the HOT5 tent ASAP. Starting with 2 Quantum Grow bulbs + 2 UVL Aquasuns
I ordered 2 more HH Rings, + 2 @ 250 gph pumps. Hopefully order will be here Friday.
Also need another 15g tote for upstairs rez to be 100%
I may cobble something together in the mean time
PetFlora
Well-Known Member
Due to fast growth, I was running out of room on the yellow tray, forcing me to get busy setting up the HH system upstairs, along side the Reveg plant, which was a single bucket HH system.
I had to reduce Reveg to a simple bubble system for now, as I needed the HH Ring and pump for the 2 babies, which are currently without the Flooming Rez until the pumps and HH Rings get here
So, the LED tent with yellow tray is full HH + Flooming Rez, while upstairs HH is sans Floom for a few days.
Sigh, the led panel I am scheduled to receive won't be ready for a while
At the moment I am lighting upstairs with one @ 4ft Quantum Grow bulb + one UVL Aquasun. I will double up lighting in a couple days.
PICOGRAV I've been pumping hydro for ~ 4 years, first drip, then fog, then hpa for 5 grows, then my DIY mist system, and now HH 2.0 + Flooming Rez
I had to reduce Reveg to a simple bubble system for now, as I needed the HH Ring and pump for the 2 babies, which are currently without the Flooming Rez until the pumps and HH Rings get here
So, the LED tent with yellow tray is full HH + Flooming Rez, while upstairs HH is sans Floom for a few days.
Sigh, the led panel I am scheduled to receive won't be ready for a while
At the moment I am lighting upstairs with one @ 4ft Quantum Grow bulb + one UVL Aquasun. I will double up lighting in a couple days.
PICOGRAV I've been pumping hydro for ~ 4 years, first drip, then fog, then hpa for 5 grows, then my DIY mist system, and now HH 2.0 + Flooming Rez
CaliJoe
Member
I already have that with some of my lights I have made.. I use a 'Reef Angel' controller to control everything, or use a Typhoon controller to just control lighting schedules/intensities.
Oops, sorry, didn't realize I was on page 1 when I hit reply.
PetFlora
Well-Known Member
Watch and learn Che-la, watch and learn 