Here to help... Ask me anything
- Thread starter Masterofgenetics
- Start date
stiffla
Active Member
hi there im a newbie and ive a big problem! i have just got some new cuttings and there in veg, i noticed i had sprider mite on these so ive been out and bought a bottle of spider mite killer what i was recomened by the shop. but the problem i have ive mixed the 50ml bottle with 200 ml of water and sprayed the underneath of my plants! ive only spayed once and read the bottle again and i should of mixed 50ml bottle with 2 liters of water.............. will these plants be ok ?? or have i just fucked them up???
thanks
MerrillJuhWanna
Member
I need some help its my first grow.Is 100w enough light for my plant?on 18/6...i mean does it look ok?
Attachments
lyin locs one
Active Member
I have a question if you can help?
My plants leafs are starting to yellow in the center of the newly grown leafs. I noticed it today.
also today was watering day, so could it just be that the plant needed water?
Im not sure whats going on?
thanks for taking the time to read.
1love.
My plants leafs are starting to yellow in the center of the newly grown leafs. I noticed it today.
also today was watering day, so could it just be that the plant needed water?
Im not sure whats going on?
thanks for taking the time to read.
1love.
dakin3d
Well-Known Member
Maybe this is a stupid question, since I've never seen it asked... But are there any clever ideas regarding stealthy disposal of males? I'm at a loss for good ideas. I appreciate the help, and thanks in advance!
bigmackeral
Member
Hey neighbor,
Been thru about 2 dozen of your Q&A pages, haven't found the answer I'm looking for. Here's the idea. I'll be veging 10 plants in a closet under 400w hps. Once big enough I'll be cloning 20.
I plan to vedge the 20 youngsters just outside the closet but within reach of the 400w. When I cut down the 18 vedging cycle for the closet mothers, and set the light to 12 hours to flower them, the clones will will still need add'l light to keep them vegetating.
Of course, that idea won't be worth ca-ca unless I can provide add'l hours of light to the clones to give them an 18 hr day. Here's the deal. After 12 hours of HPS it shuts off for the flowering plants. I then drop a full black plastic curtain to keep them in the dark. At the same time my clones are just outside the closet looking for more light.
And when the HPS shuts off I have a timer turn on a CFL fixture just for the clones to run for 6 more hours. It's a pain in the butt to raise and lower the curtain every day, but I'm space limited.
Given that scenario, here's the question -- If I give this idea a try, will my clones thrive, (all else being equal) with 12 hrs of 400w HPS, followed by 6 hours of a 4 bulb (160w) 4' fixture. You probably haven't tried it yourself, but give it your best guess. THX
Been thru about 2 dozen of your Q&A pages, haven't found the answer I'm looking for. Here's the idea. I'll be veging 10 plants in a closet under 400w hps. Once big enough I'll be cloning 20.
I plan to vedge the 20 youngsters just outside the closet but within reach of the 400w. When I cut down the 18 vedging cycle for the closet mothers, and set the light to 12 hours to flower them, the clones will will still need add'l light to keep them vegetating.
Of course, that idea won't be worth ca-ca unless I can provide add'l hours of light to the clones to give them an 18 hr day. Here's the deal. After 12 hours of HPS it shuts off for the flowering plants. I then drop a full black plastic curtain to keep them in the dark. At the same time my clones are just outside the closet looking for more light.
And when the HPS shuts off I have a timer turn on a CFL fixture just for the clones to run for 6 more hours. It's a pain in the butt to raise and lower the curtain every day, but I'm space limited.
Given that scenario, here's the question -- If I give this idea a try, will my clones thrive, (all else being equal) with 12 hrs of 400w HPS, followed by 6 hours of a 4 bulb (160w) 4' fixture. You probably haven't tried it yourself, but give it your best guess. THX
Willkar
Member
Hello Master Just a quick question I have 2 plants growing using bubbleponics, I veg for 4 weeks till Taller plant was 22inch's tall the other plant is about 17inch,Im using a grow box that is 2ftx2ftx4ft tall. Today was my first day into flowering the taller plant is about 2inch from the light I need to move my plants down some but the smaller plant will be about 6-7 inchs away from the light if i do this. Do you think I should top the taller plant, This is only first day of flowering... Thanks Master
pammyray03
Member
first crop, unknown strain. Curing now for 8 days and smells like hay. Have been told odor will change as it cures? Is that right? Thanks a bunch.
Beerazz
Member
quick question new grower here have had no luch started one and it died, but i germinated another and its been takin forever to pushup through the soil, so basically what im wondering is how long is this gonna take its in a 5qt pot i have no idea how much water to use and when to start lighting it. any help will be appreciated
avtoker15
Member
beerazz...when you put the seed in the soil you can begin your light regiment 18/6 20/4 or whatever you feel best. give it a decent watering and leave it under the light regiment and you should see it pop up within a few days..or sooner/later. only give it water when it needs it...usually when about the first 1/2 - 1 top inch of soil is dry.
and godhand...you can expect your plants to usually double size from beginning of flowering to the end of flowering...depending on the lighting and other conditions tho. hope that helped at least a little.
and godhand...you can expect your plants to usually double size from beginning of flowering to the end of flowering...depending on the lighting and other conditions tho. hope that helped at least a little.
Masterofgenetics
New Member
just some new pics of mine
without comes like this
See I turned this revegged plant from this
https://www.rollitup.org/members/mast...9-img-4159.jpg
to this
The plant was so strong it grew right through the twist tie.
Here is link so can find a direct link to me
Harvest 1 pound every two weeks
or
Texas growers unite!
thanks bro
without comes like this
See I turned this revegged plant from this
https://www.rollitup.org/members/mast...9-img-4159.jpg
to this
The plant was so strong it grew right through the twist tie.
Here is link so can find a direct link to me
Harvest 1 pound every two weeks
or
Texas growers unite!
thanks bro
DannyGreenEyes
Well-Known Member
Hi. I'm a newbie on the early stages of my first grow. I have a couple of problems and I'm looking for some info. I hope someone can help.
I'm using Foxfarm Ocean Forrest Potting soil (1/3 perlite & 2/3 soil) and I mixed in 2 tablespoons of blood meal (12-0-0) and 2 tablespoons of bone meal (0-10-0) into each 5 gallon pot. I'm using a 400w MH hung 30" above the top of the pots.
The first pic is the plant with the most pressing problem. I got her as a clone in a cube and planted her on Sunday. The soil was already wet (5 on a 1 - 10 meter) so I didn't water her on Sunday. Monday morning she was drooping a little and the water meter read 3.5 (dry), so I gave her a cup of water. Tues she was a bit more droopy and the water meter once again read 3.5, so I gave her another cup of water. This morning she looked like the pic and the meter again read 3.5. I also propped up her leaves so they'd get more light. One of her leaves started getting dry & crunchy about 5 hours ago. There's no noticable discoloration & the meter is currently reading 2. (when measuring water level I'm putting the probe in the dirt next to the cube about current root level. I can't get a reading of the cube with the probe). Logic says she's overwatered, the meter suggests she may be underwatered. Since droopy leaves are a sign of both I don't know what to think. Is dry crunchy leaves also a sign for both, or just one or the other?
The second problem is less pressing. The last 3 pics are of a plant that I bought as a clone & planted 12 days ago. She was in dirt, no cube. The camera I got sucks so you probably cant see it well, but 2 of the leaves are a very light green, kind of a light lime color. In this thread https://www.rollitup.org/marijuana-plant-problems/157345-have-plant-problem-check-here.html it most closely resembles the 9th pic from the top (Nitrate-Ammonium). First question, is Nitrate-Ammonium another way of saying Nitrogen? And when reading the rating of fertilizer (12-0-0) nitrogen is the first number, right? And the final question, at 12 days old (from rooted clone transplant), with all the nutes in the soil plus what I added, is there anyway she needs nutes already?
I'm using Foxfarm Ocean Forrest Potting soil (1/3 perlite & 2/3 soil) and I mixed in 2 tablespoons of blood meal (12-0-0) and 2 tablespoons of bone meal (0-10-0) into each 5 gallon pot. I'm using a 400w MH hung 30" above the top of the pots.
The first pic is the plant with the most pressing problem. I got her as a clone in a cube and planted her on Sunday. The soil was already wet (5 on a 1 - 10 meter) so I didn't water her on Sunday. Monday morning she was drooping a little and the water meter read 3.5 (dry), so I gave her a cup of water. Tues she was a bit more droopy and the water meter once again read 3.5, so I gave her another cup of water. This morning she looked like the pic and the meter again read 3.5. I also propped up her leaves so they'd get more light. One of her leaves started getting dry & crunchy about 5 hours ago. There's no noticable discoloration & the meter is currently reading 2. (when measuring water level I'm putting the probe in the dirt next to the cube about current root level. I can't get a reading of the cube with the probe). Logic says she's overwatered, the meter suggests she may be underwatered. Since droopy leaves are a sign of both I don't know what to think. Is dry crunchy leaves also a sign for both, or just one or the other?
The second problem is less pressing. The last 3 pics are of a plant that I bought as a clone & planted 12 days ago. She was in dirt, no cube. The camera I got sucks so you probably cant see it well, but 2 of the leaves are a very light green, kind of a light lime color. In this thread https://www.rollitup.org/marijuana-plant-problems/157345-have-plant-problem-check-here.html it most closely resembles the 9th pic from the top (Nitrate-Ammonium). First question, is Nitrate-Ammonium another way of saying Nitrogen? And when reading the rating of fertilizer (12-0-0) nitrogen is the first number, right? And the final question, at 12 days old (from rooted clone transplant), with all the nutes in the soil plus what I added, is there anyway she needs nutes already?
NLOverOntario
Member
Hello there, howdy, thanks for this thread. I am hoping to start a sea of green grow soon from clones in a 6'x6' room with a 1000watt hps. I have looked absolutely everywhere but can't seem to find out which system ( my options are; DWC, Ebb and Flow or just ordinary adding nutrient water to a perlite/vermiculite/peatmoss) system would work best to give me the fastest, highest yielding, perpetual harvest. Thank you so much in advance.
Also if it helps I use General hydro Nutrients and have been doing simple perl/verm/peat grows in the past with medium results.
Also if it helps I use General hydro Nutrients and have been doing simple perl/verm/peat grows in the past with medium results.
unclebobbyb
Member
Can blackstrp be used in a deep-water culture? Or maybe plain sugar?
Masterofgenetics
New Member
So here it is guys these pics are a week old, 1st week of flower, oh and of course my puppy he is 7 1/2 months old and 71 lbs
Notice the gallon of water in between the Jack for size comparison
I will post soon but I have to save my pics because I only have 359 left...lol
peace
Notice the gallon of water in between the Jack for size comparison
I will post soon but I have to save my pics because I only have 359 left...lol
peace
Masterofgenetics
New Member
I wouldn't just because the air stones will clog up hourly. but really don't know but botanicare makes stuff called sweet you might want to check it out...