Hlg-600h-48b wiring help!

K

KandyGreen

Member
I have recently acquired a led lighting that needs to be hooked up to this Meanwell HLG-600H-48B driver. There isn't much to go off of on the internet about this driver and it has extra features I don't know much about. I would like to just hook up my lights and get it going...

I have 2x chinese made boards with samsung 561c s6 diodes and the driver (already attached the plug).

From the other end, it lists..
RC+, RC- & GRD, +5Vss
DIM(Not installing)
And two other -V and +V.

Please help me with a simple method to get it wired and working. Thank you!! ^^v
 
K

knight mare

Well-Known Member
the side with one lead coming out is for the plug to go in to an outlet the side with the v- v+ are to go in the plus and minus on the board then link the same on the other board or do a search on you tube. here you go
 
K

KandyGreen

Member
Use only one of the two pairs for the v's? I have 2 led boards. I just attempted to connect them using wagos and both v's but the boards didn't light up.
 
K

KandyGreen

Member
Ok, so there's 4 leads on the right.
Rc's, dim, v's, and v's...
So I connected both boards to both "v" leads... im not doing a dimmer so i jist want 100% output. To be clear, you are telling me that the second "v" lead is a dimmer?
 
ANC

ANC

Well-Known Member
I wouldn't mind one of those drivers, I have 7 unused 100W strips :)
Ordering drivers next week, just had a message from the bank.
 
K

KandyGreen

Member
Details: 280x900x2.0mm(L29.52"xW9.18") , 3.0/W conductivity,2OZ, 16S50P, 129.6-372W, 43.2-49.6V, 800pcs Samsung 561C s6 leds



Product Name Samsung 561C S6 led diodes
Substrate Material Aluminum PCB
Thickness 2.0mm
Smallest aperture 0.003"
Surface treatment HASL
Modle PCB Board
Driver Without driver
Brand MEIJIU LIGHTING
LED Type 800pcs SAMSUNG 5630 S6 LM561C
Current: 3000mA-7500mA
Power 129W-372W
Voltage 43.2V-49.6V
 
zypheruk

zypheruk

Well-Known Member
Ah ok it's the longer boards, carry on it. Was worried in case it was the smaller qb,s like Hlg sell..
Be nice to see these running and growing the herb
 
Last edited:
You must log in or register to reply here.
Top