mercer88
Well-Known Member
Heres a Way Of Saving The Enviroment And Recycle By Making
A Drinks Can Hash-tray
You will Need :
1 Empty Coke Can / Aluminium Drinks Can,
A pair Of Sharp Scissors,
A Screwdriver With A Nicely Sized Handle
Common Sense............
please be carefull
( sharp images follow )
step 1. using the scissors remove the top from the can,
step 2. clean up the top edge by trimming off excess neatly
step 3. hold the bottom of the can,
and cut strips,
FROM TOP TO BOTTOM LEAVING 1CM UNCUT LIKE SO,
step 4. fold all the strips flat,
still make sure that u leave 1cm between the bottom of the strip and the bottom can edge.......
step 5 weave the first strip UNDER THE NEXT making sure the side of the strip is flush to the next strip like so........
and pinch down once u have the strip flush,
do this with the rest till you get to the last strip.......
step 5 fold the last strip underneath the very very first strip ( not through ) like so......
step 6. turn over and use the handle of the screw driver to flatten all edges perfectly
! FINAL STEP !
ROLL A FAT JOINT
OF
YOUR HOME GROWN
A Drinks Can Hash-tray
You will Need :
1 Empty Coke Can / Aluminium Drinks Can,
A pair Of Sharp Scissors,
A Screwdriver With A Nicely Sized Handle
Common Sense............
please be carefull
( sharp images follow ) step 1. using the scissors remove the top from the can,
step 2. clean up the top edge by trimming off excess neatly
step 3. hold the bottom of the can,
and cut strips,
FROM TOP TO BOTTOM LEAVING 1CM UNCUT LIKE SO,
step 4. fold all the strips flat,
still make sure that u leave 1cm between the bottom of the strip and the bottom can edge.......
step 5 weave the first strip UNDER THE NEXT making sure the side of the strip is flush to the next strip like so........
and pinch down once u have the strip flush,
do this with the rest till you get to the last strip.......
step 5 fold the last strip underneath the very very first strip ( not through ) like so......
step 6. turn over and use the handle of the screw driver to flatten all edges perfectly
! FINAL STEP !
ROLL A FAT JOINT
OF
YOUR HOME GROWN
