HockeyBeard
Well-Known Member
What's your budget? A51, Onyx, and the links right above your post is the direction you should look into.
IF you are new to LED and want help choosing what to buy, POST HERE!
- Thread starter SnotBoogie
- Start date
- Status
What's your budget? A51, Onyx, and the links right above your post is the direction you should look into.
JimmyIndica
Well-Known Member
I would rec a vero18 4000K fixture. Vero18 is the cheapest of the best IMO. Well worth the$
Hmm, very Hard my Friend! I would buy the W90 Area51 but not Availeble in Germany
manny Lights are not Available... We have in Cologne a Growshop but he wait for the Area51 for a long Time and when he sell the Light is much higher in Price. How manny Are51 i need for 80x80cm 2 ore more? The Rest LED you Posting are not on my Budget what are you thoughts from this LIGHT http://www.grownorthern.com/lighting.html?alias=Lighting also not Cheap but very low in Watt TANG says he Produce 2g per Watt if this true this Light is enough for 80x80cm and its run with 75 Watt incredible Cheap but i dont now it this tue etc... the Pacific also not in my Budget my Friend!
pop22
Well-Known Member
Tang is a hell of a canna gardener no matter what light he uses. But I've seen all his grows, hell, Dutch Passion has highlighted at least three of his grows. And yes, he get 2+gr/watt with those light!
Hmm, very Hard my Friend! I would buy the W90 Area51 but not Availeble in Germany
the Pacific also not in my Budget my Friend!
BM9AGS
Well-Known Member
I don't know what to tell you man. @littlejacob may be able to help you the best then. Maybe you can convince him to make you a light.Hmm, very Hard my Friend! I would buy the W90 Area51 but not Availeble in Germany
the Pacific also not in my Budget my Friend!
kailiwela44
Active Member
Hi.
I have a tent that is 30"Lx18"Dx36"H. I plan to build my own LED using 3000k COB LED and hopefully under 100watts of lighting power. How many of what drivers, COB LED recommendation, and heat sinks do I need? I plan to hang/mount each LED light separately as shown from another DIY using their small build.
My plan B is the purchase a platinum grow lights P150 as their p300 would draw more power than I prefer.
My budget is about $200 for parts I listed.
Ive read and read but too many "fine lines" or debates as to whose opinion is most accurate. If the DIY can beat the P150 for efficiency and price then i'm all ears and on line shopping ready.
I have a tent that is 30"Lx18"Dx36"H. I plan to build my own LED using 3000k COB LED and hopefully under 100watts of lighting power. How many of what drivers, COB LED recommendation, and heat sinks do I need? I plan to hang/mount each LED light separately as shown from another DIY using their small build.
My plan B is the purchase a platinum grow lights P150 as their p300 would draw more power than I prefer.
My budget is about $200 for parts I listed.
Ive read and read but too many "fine lines" or debates as to whose opinion is most accurate. If the DIY can beat the P150 for efficiency and price then i'm all ears and on line shopping ready.
Zulu Smoker
Active Member
Save your money and don't do that plan B. Save up and get a better light, a cob at least like your DIY.
kailiwela44
Active Member
how many of the Cree CXA3070 and/or Vero 29 would I need?
JimmyIndica
Well-Known Member
2 area51 W90s. Its probably little more than your looking to spend but well worth the $
JimmyIndica
Well-Known Member
amazon.uk
smokehog
Well-Known Member
Thanks JimmyIndica, all i seem to find is stranded. Need solid core for ideal holders
http://www.amazon.co.uk/Gauge-Silicone-Rubber-Cable-Flexible/dp/B00EUU8B48/ref=pd_rhf_se_s_cp_4?ie=UTF8&refRID=00CMAVDVTQPRZE8V7SR0
http://www.amazon.co.uk/Gauge-Silicone-Rubber-Cable-Flexible/dp/B00EUU8B48/ref=pd_rhf_se_s_cp_4?ie=UTF8&refRID=00CMAVDVTQPRZE8V7SR0
JimmyIndica
Well-Known Member
medicinehuman
Well-Known Member
Do you have a Lowes type store(building supplies ect.) Maybe electric supply? Just wondering, that's where I picked up some solid 18 gauge. Good luck. By the way I HAVE USED STRANDED BEFORE ALTHOUGH NOT AS EASY TO WORK WITH.
medicinehuman
Well-Known Member
I have used both, just don't go less diamiter than 18 or more than 16g.
Calibasshead
Member
If you have 15' x 10' to work with what LEDs would you choose and how many?
mc130p
Well-Known Member
all you have to do is tin your wires
smokehog
Well-Known Member
Thanks JimmyIndica i have sent them an email to see if they have 18awg solid core. Its all i need to construct 2 x cxb3590 led fixtures. Oh and some wagos...
Mc130p, i was going to tin if i did not get solid core, but thanks for the input.
medicinehuman i even went to maplins and they had 10 core and 12 core but not what i needed.
Mc130p, i was going to tin if i did not get solid core, but thanks for the input.
medicinehuman i even went to maplins and they had 10 core and 12 core but not what i needed.
stonedwolf
Member
Anybody have any thoughts on the Mars Pro lights e.g. the Epistar 320?
- Status