Insight: Amare Tech Solar Spec LED Panels

Hapo

Member
...glad I saw this...I was puzzled by the choice of spectrums offered by the Spider and put off by the lack of control over the spectrum...

...the fanless design intrigues....

...at this point I am comparing the BLM spider 600 to theSuper Grow Spectrum King 450...
 

Yodaweed

Well-Known Member
Where's the insight about this light, we have no actual data you just are rambling on about nothing....
 

indianajones

Well-Known Member
seems to be another re-branded evergrow light, and they use the same brands of chips.

looks like a duck to me...
 

hyroot

Well-Known Member
seems to be another re-branded evergrow light, and they use the same brands of chips.

looks like a duck to me...

evergrow makes vipar and they made the cases for the 2012 area 51's. The vipars use real epistars. The 2012 a51's used helexion leds. Until someone opens it up or Amere tech's site is up. We'll never know.
 
Last edited:

PetFlora

Well-Known Member
It looks like this, it looks like that...

Why so much unnecessary gossip?


The derogatory comments are from a LACK of insight

Look up the definition of insight

If RIU has Uploader working I will post pics tomorrow of the babies under the SS 260

As I said before, what ever technical data they make public will be on their website


The purpose of my Insight is to SHOW what they do

Kabish?
 

PetFlora

Well-Known Member
...glad I saw this...I was puzzled by the choice of spectrums offered by the Spider and put off by the lack of control over the spectrum...

...the fanless design intrigues....

...at this point I am comparing the BLM spider 600 to theSuper Grow Spectrum King 450...

BML offers two off the shelf versions -one for veg and one for flower, though neither is designed for mj.

I hoped to combine 2 into 1 so save money and space


Clearly it works quite well for flowering, but it is compromised for sat growers.

However, it might be fine for growing Indicas
 

indianajones

Well-Known Member
It looks like this, it looks like that...

Why so much unnecessary gossip?


The derogatory comments are from a LACK of insight

Look up the definition of insight

If RIU has Uploader working I will post pics tomorrow of the babies under the SS 260

As I said before, what ever technical data they make public will be on their website


The purpose of my Insight is to SHOW what they do

Kabish?
i'm just looking out for the public and asking big questions. if you can
get the same products elsewhere, possibly for cheaper, why wouldn't
you? if all these lights are being produced in the same place, by the
same people, wouldn't you want to know? any intelligent, informed
consumer would! you always seem so up in arms about everything,
why not relax and have fun within these communities?

i never made a derogatory comment about that light, that's just your
interpretation of what i said. as a matter of fact, i had awesome results
from my evergrow light, but i purchased them directly for a lot less than
what most people pay for their re-branded products.

you might want to work on your italian, lol. i find it ironically funny that you
said "do you understand" improperly. i'm italian american though, so i grew
up around it, don't take it wrong ;)
 

PetFlora

Well-Known Member
i'm just looking out for the public and asking big questions. if you can
get the same products elsewhere, possibly for cheaper, why wouldn't
you? if all these lights are being produced in the same place, by the
same people, wouldn't you want to know? any intelligent, informed
consumer would! you always seem so up in arms about everything,
why not relax and have fun within these communities?

i never made a derogatory comment about that light, that's just your
interpretation of what i said. as a matter of fact, i had awesome results
from my evergrow light, but i purchased them directly for a lot less than
what most people pay for their re-branded products.

you might want to work on your italian, lol. i find it ironically funny that you
said "do you understand" improperly. i'm italian american though, so i grew
up around it, don't take it wrong ;)

Because,

1. You can't tell a book by its cover
2. Even IF it was made in the same factory as crap lights, doesn't mean the same facility is not capable of following directions to make a quality panel


You know it alls might want to fact check before calling me out

Kabish?

www.peevish.co.uk/slang/k.htm - View by Ixquick Proxy - Highlight

kabish? Verb. Understand? Also spelt kapeesh, capeesh. An anglicization of the Italian capisci?
 

Yodaweed

Well-Known Member
Because,

1. You can't tell a book by its cover
2. Even IF it was made in the same factory as crap lights, doesn't mean the same facility is not capable of following directions to make a quality panel


You know it alls might want to fact check before calling me out

Kabish?

www.peevish.co.uk/slang/k.htm - View by Ixquick Proxy - Highlight

kabish? Verb. Understand? Also spelt kapeesh, capeesh. An anglicization of the Italian capisci?
He didn't say those lights sucked he said he had a good grow with evergrow lights.
 

indianajones

Well-Known Member
actually, i don't kabish. state's got me by the balls and i have
two more years (already done two, two more to go) before i
can smoke again. for the record, growing without being able
to smoke sucks major ass.
 

PetFlora

Well-Known Member
AND, we're back

Late Monday I moved biggest seedling to its' own Mini Me F & D as it was crowding the others

It is now pushing on 7" tall with lots of short inter-nodal development

Those remaining in the igloo are beginning to break out as well

and at this moment the 3rd tent issues have not been resolved

I wait when this happens


Took new pics

Here's hoping File Uploader is working-- NOPE


Now it is...
 

Attachments

Last edited:

lax123

Well-Known Member
1. You can't tell a book by its cover
How about a pic of the chips...power off.
Thx, I was just wondering, why not just make a close up photo of the diodes. Epistars are easily to be spotted. And if there is even one epistar....

Nothing is more important than having the best diodes possible in the given nm/k
trying to find that amare thingy with google all I find is you posting the same thing, same posts in several forums. Do you get money for that? Or why bother advertising like that with no tech data?
 
Last edited:
Top