For LEDs, or any light for that matter, to be truly effective in maximizing a plants potential you need two things; spectrum AND power. Miss the mark on either of those and you will not see full potential. Often people focus on one at the expense of the other, from what I have seen.Incandescents are really high in red,They're expensive to run and put off considerable heat though.I am running 2 135w 5 band a 100w 3 band and a 90w 3 band led setup supplemented by 1 400w HPS in a 3x6.I've experienced good growth with leds alone,but things really fattened up with the addition of the HPS.I think it is filling in gaps in the spectrum.Week 2 in flower so I guess I'll find out in 1.5 months.
So ,a single 300 Watt panel,compared to ten panels of 30 Watts ,of same spectrum will have the same yields ?For LEDs, or any light for that matter, to be truly effective in maximizing a plants potential you need two things; spectrum AND power. Miss the mark on either of those and you will not see full potential. Often people focus on one at the expense of the other, from what I have seen.
Well yes,plants adapt to variations of spectrum per leaf area ....Spectrum homogeneity doesn't mean much at all, it's an aesthetical thing more than anything.. especially with wide degree lenses. Well distributed spectrum panels yeah, but don't stress about it, have seen plenty of less well distributed spectrum panels do just fine. (Diyers)
Which is why we made the move to wider angle and not the lenses many LED companies have gone to. Once you have solid power and a great spectrum the spread really can come into play. We experimented to prove this in our own R&D and continue to test lenses etc. with our Spectroradiometer. We know the exact height where every light we test is perfect in terms of distance from canopy. You would be surprised that it is not necessarily exactly where it should be based on using the angles from the lenses and solving for the footprint and distance. Usually a bit further out. However we like to have the lights closer so as to minimize the distance the light travels, whether directly below the light or at the edges of the footprint.Yes ...
We agree...
120/130/170 lambertian power distribution is adequate enough ,to provide good to great light "blending "...
No..for sure homogeneity of light is not a "prime " variable that needs fine tuning ,in order to achieve overall better grow efficiency ..
but still...
If a led system has already good to great :
- leds efficiency (mW of light / mW of electricity needed )
-driving efficiency ( W of output power / W of input power )
-cooling vs power design
- ' ideal ' spectum ( ambiguous ,enough... )
-' ideal ' light power distribution
....
Ok....
Then I guess that having also a total diffused and of great homogeneity light emission ,for sure it is a " plus " ....
Not of the "great " ones maybe ...
But probably,somewhere makes that small difference ....
Anyway...
Narrow lenses to me ,automatically means ...=> " No reflective walls at grow space " ..
& .... "Greenhouse utilisation " ..
&.."decreased coverage & light saturation at small height grow spaces " ...
....
Ok no need to stress about the light spectral homogeneity..
....
Cooling and light power distribution/homogeneity are those ones ,to stress about ...
Hey JC, this will definitely depend on the levels of CO2 and other variables (genetics, nutrients, etc.) but for the Platinum XL (NOT the Platinum XL-U) you would want to be about 20"-22" off the canopy. I did see a customer get much closer but he was running a light mover about 8" to remove shadowing. He got close to 12" before bleaching.thx dave how far from the plants do you hang them during flower?
Have you hooked that light up to a kill-a-watt? Curious what the actual draw is.When you're ready to send me one to do a side by side against blackstar 240s thread on RIU let me know -- happy to prove yours are superior and i won't charge you anything to do so
Nope don't have one.. have been told it should be around 135w.Have you hooked that light up to a kill-a-watt? Curious what the actual draw is.
Interesting, can't find any actual wattage on their site and they just refer to it as 240w. I am guessing you are correct within 10-15 watts based on what I can gather from their site. Assuming it is 135 watts I don't believe their specifications regarding footprint will pan out. What size footprint are you growing with it? How tall are you finishing? Any special growing techniques (topping, scrogging, etc.)? How many flower cycles has your light been through and what are you averaging in final dry weight?Nope don't have one.. have been told it should be around 135w.
I have a 240w Black Star, had 2 untill one gave out on me..Nope don't have one.. have been told it should be around 135w.
Hey sgt, they can seem pricey at first but if you look at the cost per watt they are actually very affordable. This does bring up a question I have wanted to ask the LED community regarding what is considered expensive or even cheap.I have a 240w Black Star, had 2 untill one gave out on me..
Was just looking at the Black Dog lights today, a little pricey, but they have the 5watt leds also like the SolarFlares.