epixbud
Well-Known Member
Well, cloner time! I needed a cloner with minimum 80 sites and maximum 120 sites, so I made it, well just the 80 holes for now and the rest later.
This guide shows how I did it, what I used and the results. It has all been done from research within Rollitup! Just bigger, well, more quantity I mean.
What you will need is :
2 Under bed storage bins ($25 each)
1 10 gallon jug ($10)
1 264 gallon per hour pump ($50 ) ( had 185 first, not strong enough, changed up)
15 ½ poly tubing ($20)
5 ½ 90 Digress Fittings ($1 each)
3 ½ T Fittings ($1 each)
18 - #8 Misters (not sure, just small and red) ($4 each!) (had smaller ones first, no work)
1 Can Plastic Paint Black ($6)
1 Roll Foil Tape ($11)
1 Tube Silicone ($4)
1 1 ½ 90 ($1)
40 2 x 1 Neoprene Grow Plugs ($50) (cut in half, dont need then 1 thick!)
1 1 ¾ hole saw (leaves a perfect 2 hole!)
This guide shows how I did it, what I used and the results. It has all been done from research within Rollitup! Just bigger, well, more quantity I mean.
What you will need is :
2 Under bed storage bins ($25 each)
1 10 gallon jug ($10)
1 264 gallon per hour pump ($50 ) ( had 185 first, not strong enough, changed up)
15 ½ poly tubing ($20)
5 ½ 90 Digress Fittings ($1 each)
3 ½ T Fittings ($1 each)
18 - #8 Misters (not sure, just small and red) ($4 each!) (had smaller ones first, no work)
1 Can Plastic Paint Black ($6)
1 Roll Foil Tape ($11)
1 Tube Silicone ($4)
1 1 ½ 90 ($1)
40 2 x 1 Neoprene Grow Plugs ($50) (cut in half, dont need then 1 thick!)
1 1 ¾ hole saw (leaves a perfect 2 hole!)
Attachments
-
63.2 KB Views: 242
-
43.3 KB Views: 272
-
34.6 KB Views: 196
-
41.7 KB Views: 462
-
61.3 KB Views: 337
-
42.4 KB Views: 227
-
67.8 KB Views: 280