My Grow Room just want some opinions

TheGrassIsGreenerInAus

TheGrassIsGreenerInAus

Well-Known Member
Hey guys so here's some pics of my baby she's a couple weeks into actually showing pistils, there's 2 of those fluoro tubes on each side tho you can only see one plus the 2 little 23w CFLS on the top at the back, and 2 little 15w fans just to circulate the air they run 24/7. She looks lush and green and it is brighter than those pictures show it's just a shite camera but I just wanted any input on how I can improve it, what I should get off it, etc. Any advice would be much appreciated :)
 

Attachments

  • IMG_20180114_184640.jpg
    IMG_20180114_184640.jpg
    5.5 MB · Views: 50
  • IMG_20180114_184503.jpg
    IMG_20180114_184503.jpg
    5.4 MB · Views: 45
  • IMG_20180114_184640.jpg
    IMG_20180114_184640.jpg
    5.5 MB · Views: 46
  • IMG_20180114_184622.jpg
    IMG_20180114_184622.jpg
    5 MB · Views: 43
I would say add more light and possibly a reflector. Your losing half the light them cfls are throwing out because theres nothing to focus the light on the plants
 
Green Logician do you mean just near the hole blowing toward it or as close to in the hole as possible? Spud Guy thanks for the input mate but you mustnt have looked closely the entire thing is lined with reflective silver
 
I apologize if that sounds sarcastic btw lol I didn't mean it to also just wanted to ask add MORE light?? Fuck me lol how much do they need got 200 odd watts in there atm, 15000 or so lumens
 
Ah those are the 50 watt a piece tubes are they? My bad but couldnt hurt to add more light. More light = more bud.

And i see you have it lined with reflective material alright but cfls dont have as good penetration. So by the time it bounces off the roof and back to the plant it would lose alot. Just my 2 cents buddy. Someone could say im wrong as i could be . Ive not as much experience with cfls and fluros
 
Nah you're right man like I said I want opinions lol and I wasn't trying to sound nasty :) they aren't quite 50 they are 36ers I believe so 4 of those plus the 2 23watters so it's probably not QUITE 200 I didn't work it out precisely just a ballpark the 4 tubes would be about 140 two 20s 180 plus all the little digits I was close lol
 
TheGrassIsGreenerInAus said:
I apologize if that sounds sarcastic btw lol I didn't mean it to also just wanted to ask add MORE light?? Fuck me lol how much do they need got 200 odd watts in there atm, 15000 or so lumens
Click to expand...

If you can pick up any of those screw in LED bulbs used for home lighting cheap then do so.
You should be able to get more light for less watts, because 200w in a small space without extraction is going to get warm.

It might be a good time to start bending and manipulating the plant to keep it lower and fill more canopy space too.
 
coreywebster said:
If you can pick up any of those screw in LED bulbs used for home lighting cheap then do so.
You should be able to get more light for less watts, because 200w in a small space without extraction is going to get warm.

It might be a good time to start bending and manipulating the plant to keep it lower and fill more canopy space too.
Click to expand...
That's what those two CFLs are, screw ins from big W lol 6 bucks a pop
 
TheGrassIsGreenerInAus said:
That's what those two CFLs are, screw ins from big W lol 6 bucks a pop
Click to expand...
I have heard of folks picking up LEDs from the dollar store. Although I'm in UK and they are still expensive here.
Something to look out for though if your ever in a bargain shop and lucky enough to find them cheap. Defo more efficient than CFLs.
 
TheGrassIsGreenerInAus said:
Green Logician do you mean just near the hole blowing toward it or as close to in the hole as possible?
Click to expand...
In the hole if possible, with the hole being just the right size to slot the fan into it.

On my clone tent, when they are getting almost ready I plop a little hand fan that runs on rechargeable 18650 batteries on top, positioned right in the vent hole of the same size :)
 
I see your fan's frame has a little rim, so if you cut a round hole about 5mm smaller in diameter than your fan, your fan could neatly sit on top of the growbox pulling air out.
 
You could build a scrog and start soon, you will control your plant more and get a better yield. just my 2 cents :)
 
You must log in or register to reply here.

Similar threads

G
Barneys Blue Cheese & Tangerine Dream Outdoor Grow Southern Europe
Replies
10
Views
447
gremmy2shoes
G
H
I need answers and opinions on my soil-mix I'm using for my current grow.
Replies
1
Views
333
by2
by2
VictorFlorez
An update. Slimy res water, and *mostly* minor seedling issues... But doing alright so far.
Replies
0
Views
656
VictorFlorez
VictorFlorez
G
Have some experience in growing on balcony (summer) - Now, my very first indoor grow (winter)
Replies
9
Views
931
NanoGadget
NanoGadget
D
First ever grow ever and using Ebb n flow oxygen cube reciruclating system
4 5 6
Replies
118
Views
6K
Hollatchaboy
Hollatchaboy
Back
Top