I currently have 2-400 watt hps lights and ballasts in 2 6" cool tubes. To switch it to 1000w can I just buy 2 1000w ballasts and 2 -1000w bulbs and be good. Do the new ballasts come with wiring that will go from ballast to wire into the cool tube
My grow room will be 6ft wide x 5.5ft long and 8 ft high I already have a setup of 2-400 watt hps lights in cool tubes will it be worth it to buy 2-1000w hps lights to replace the 2-400s
My grow room will be 6ft wide x 5.5ft long and 8 ft high I already have a setup of 2-400 watt hps lights in cool tubes will it be worth it to buy 2-1000w hps lights to replace the 2-400s
You can get them in both low and high Kelvin ratings. Not much heat output.
I'd go w/a 1K HID. Half the number of ballasts and bulbs to screw with.
I've got a 5 X 5.5 grow area with one 600 and about 500+ watts of these big boy CFLs. Kind of mixed and matched the CFLs with a few UV bulbs. Got 2 gooseneck lamps that hold 5 bulbs each, one of my best purchases, WalMart $23. So the goosenecks w/10 CFLs give me a lot of flexibility.
Thanks guys I'm going to go with a 1000w kit off eBay. First before I can do any of this I need to run power to by steel building in my backyard and need to figure out what amp I need