teddyninja13
Member
Ok, so with my tax return this year I decided to stop with the small closet and go legit. So I have made a list of everything I want to purchase and figured I would run it through here for everyone's opinions before I purchased everything this coming Friday.
Equipment:
- CAP GEN Pilot Light Natural Gas CO2 Generator
- Energy Efficient & High Performance Circular In-Line Duct Fan 6"
- ACF16 Active Air 16" Wall Mountable Oscillating Hydroponics Grow Fan X2
- 6" Dust Shroom
- 6" Coconut Shell Activated Carbon Charcoal Filter
- 400 watt MH Grow Light System Set
- 10" x 25' Panda Film Black and White Poly Pandafilm
- 10,000 BTU Scratch & Dent Silver Portable Air Conditioner Unit
- 6" x 16' Flexible Ducting Hose +2 Clamp Inline Fan Blower Filter Exhaust Duct
- Wattage: 1000w Thunder Digital Ballast X2
Reflector: 6" Cool Tube Air Cooled Reflector
Bulbs: High Pressure Sodium (HPS) Bulb Only
Hangers: 1/8th Ratchet Rope Hangers
- Grow Room Dehumidifier
- CAP AIR-4 CO2 Atmosphere Temp Humidity Controller Air 4
- Growing Tent Box Room Greenhouse System Mylar 8' x 4' x 6'8"
- Growing Tent Box Room Greenhouse System Mylar 3' x 3' x 6'8" (Mothers/Clones)
- 6" VENTS Flange + Coupler X2
- Growlab Equipment Hanging Board 15.75" x 78.74" X2
- Uvonair UV-In-Line - ozone generator
I plan on having the mothers and clones under the 400W in the smaller grow room that will bring in fresh air and then vent into the flowering room where the air will be circulated through the room and out the filter to finally go the the Uvonair.
I will have a fan on either end of the flowering room, and one in the mothers room.
The 2 1000w HPS setups for the flowering room.
I will be having 4 trays in the flowering room each with their own res. Doing a flood n drain setup. I will be using my current setup as a guideline, which is a system following the harvest every two weeks idea. Only I will be up-scaling my current setup to take up the larger space.
all wires, CO2 tank, A/C, Inline fans, will be mounted on the outside of the room.
All opinions are welcomed, will the 2 1000W be enough for flower? the 1 400W enough for the mothers and clones? Advice? Things I should do differently? I am open to ideas.
Teddy

Equipment:
- CAP GEN Pilot Light Natural Gas CO2 Generator
- Energy Efficient & High Performance Circular In-Line Duct Fan 6"
- ACF16 Active Air 16" Wall Mountable Oscillating Hydroponics Grow Fan X2
- 6" Dust Shroom
- 6" Coconut Shell Activated Carbon Charcoal Filter
- 400 watt MH Grow Light System Set
- 10" x 25' Panda Film Black and White Poly Pandafilm
- 10,000 BTU Scratch & Dent Silver Portable Air Conditioner Unit
- 6" x 16' Flexible Ducting Hose +2 Clamp Inline Fan Blower Filter Exhaust Duct
- Wattage: 1000w Thunder Digital Ballast X2
Reflector: 6" Cool Tube Air Cooled Reflector
Bulbs: High Pressure Sodium (HPS) Bulb Only
Hangers: 1/8th Ratchet Rope Hangers
- Grow Room Dehumidifier
- CAP AIR-4 CO2 Atmosphere Temp Humidity Controller Air 4
- Growing Tent Box Room Greenhouse System Mylar 8' x 4' x 6'8"
- Growing Tent Box Room Greenhouse System Mylar 3' x 3' x 6'8" (Mothers/Clones)
- 6" VENTS Flange + Coupler X2
- Growlab Equipment Hanging Board 15.75" x 78.74" X2
- Uvonair UV-In-Line - ozone generator
I plan on having the mothers and clones under the 400W in the smaller grow room that will bring in fresh air and then vent into the flowering room where the air will be circulated through the room and out the filter to finally go the the Uvonair.
I will have a fan on either end of the flowering room, and one in the mothers room.
The 2 1000w HPS setups for the flowering room.
I will be having 4 trays in the flowering room each with their own res. Doing a flood n drain setup. I will be using my current setup as a guideline, which is a system following the harvest every two weeks idea. Only I will be up-scaling my current setup to take up the larger space.
all wires, CO2 tank, A/C, Inline fans, will be mounted on the outside of the room.
All opinions are welcomed, will the 2 1000W be enough for flower? the 1 400W enough for the mothers and clones? Advice? Things I should do differently? I am open to ideas.

Teddy