Humboldt
Well-Known Member
Old School, Power Hitter!
I was at the thrift store today and saw an old sport bottle, boy did it bring back memories, we used to make power hitters out of them, I just had to buy it.
I'm going to show you how you can make your own power hitter the best I can, I had to resort back to my web cam but it still should do the trick.
What You Will Need, find or Pilfer,
1. At Least Quarter Of A Brain.
2. An old sport bottle with lid/straw (bigger the bottle the better) make sure it's an old squeezable bottle, most sports bottles today are hard and has no straw, only a popup cap.
3. Tape - Electrical - Duct Tape, what ever works for you.
4. Connecter - I use big wooden beads, use what ever you can find something that can be manipulated to fit in the straw and can fit a joint in adjacent end (something that won't melt the straw) Examples: wood, soap stone, pipe stone, some thick metals such as a socket from your socket & racket set, thick alloy or brass, try to avoid thin metals such as aluminum, aluminum foil.
5. Knife, razor blade, file, sand paper, depending on what materials you use, I used knife and wood.
6. Lot's of weed, rolling papers and lungs.
Ok Here We Go,
Take a piece of tape and cover the straw hole on the front of the lid.
Do the same on the other side of lid, after doing so take your knife/razorblade and cut a slit in the tape through the hole, this will help seal the straw, also you could put a strip of tape on the straw inside the lid.
Seal the top of bottle with some tape, where the lid fits , this will help make it air tight.
Take your bead, or what ever you plan on using and make one end fit in straw snug, I just carved one end of bead with knife, until I got a tight fit.
Carve out other end so that an average joint will fit nicely.
Fit joint in connecter and connect to straw.
Light the joint, take a hit to make sure it's going, screw on lid, squeeze and inhale.
Click Here to see it in action!
Hope you will enjoy as much as I do!
![](/proxy.php?image=http%3A%2F%2Fimg101.imageshack.us%2Fimg101%2F7242%2F31480516uj0.jpg&hash=b21f7ca17627f4448c41943b2ce845a4)
I was at the thrift store today and saw an old sport bottle, boy did it bring back memories, we used to make power hitters out of them, I just had to buy it.
I'm going to show you how you can make your own power hitter the best I can, I had to resort back to my web cam but it still should do the trick.
What You Will Need, find or Pilfer,
1. At Least Quarter Of A Brain.
2. An old sport bottle with lid/straw (bigger the bottle the better) make sure it's an old squeezable bottle, most sports bottles today are hard and has no straw, only a popup cap.
3. Tape - Electrical - Duct Tape, what ever works for you.
4. Connecter - I use big wooden beads, use what ever you can find something that can be manipulated to fit in the straw and can fit a joint in adjacent end (something that won't melt the straw) Examples: wood, soap stone, pipe stone, some thick metals such as a socket from your socket & racket set, thick alloy or brass, try to avoid thin metals such as aluminum, aluminum foil.
5. Knife, razor blade, file, sand paper, depending on what materials you use, I used knife and wood.
6. Lot's of weed, rolling papers and lungs.
Ok Here We Go,
Take a piece of tape and cover the straw hole on the front of the lid.
![](/proxy.php?image=http%3A%2F%2Fimg101.imageshack.us%2Fimg101%2F4097%2F66593508kn6.jpg&hash=84e9e5536dd53e30399fe25380d2b078)
Do the same on the other side of lid, after doing so take your knife/razorblade and cut a slit in the tape through the hole, this will help seal the straw, also you could put a strip of tape on the straw inside the lid.
![](/proxy.php?image=http%3A%2F%2Fimg101.imageshack.us%2Fimg101%2F8967%2F51494247vu5.jpg&hash=2b8bd11975ee1afae7cccecd2d9b7261)
Seal the top of bottle with some tape, where the lid fits , this will help make it air tight.
![](/proxy.php?image=http%3A%2F%2Fimg101.imageshack.us%2Fimg101%2F4203%2F17577007yp7.jpg&hash=b3f9dfb3d989bd7eef1153c0dcdef948)
Take your bead, or what ever you plan on using and make one end fit in straw snug, I just carved one end of bead with knife, until I got a tight fit.
![](/proxy.php?image=http%3A%2F%2Fimg101.imageshack.us%2Fimg101%2F9793%2F56174638wo3.jpg&hash=94723df4359f944c5e9af7d72fdfebfd)
Carve out other end so that an average joint will fit nicely.
![](/proxy.php?image=http%3A%2F%2Fimg101.imageshack.us%2Fimg101%2F128%2F16085532bn3.jpg&hash=900d8dea55f7265c5f543f156e4c815f)
Fit joint in connecter and connect to straw.
![](/proxy.php?image=http%3A%2F%2Fimg101.imageshack.us%2Fimg101%2F5640%2F70340905uw3.jpg&hash=cac0b3865a906a02991a81e5df3a59c1)
Light the joint, take a hit to make sure it's going, screw on lid, squeeze and inhale.
![](/proxy.php?image=http%3A%2F%2Fimg101.imageshack.us%2Fimg101%2F988%2F54802218tz5.jpg&hash=2f4f3f3ba0b3bc0f6482198009e2a46e)
Click Here to see it in action!
Hope you will enjoy as much as I do!