Orca Film Vs Black and White Poly

At 11 mil the orca is much thicker than most other options and should last longer in your application. If this will be used long term then I suggest using strips of 1x2, staple the poly to that and roll it around the 1x2 one time and then screw or nail the strip of wood to the wall or ceiling. This will hold up a lot longer than just popping staples through the poly and having all the "load" hanging on the staples.
 
Doesn't even have to be a 1x2, could just be a piece of fur strip (thats actually the way to go).
 
I would note that the extra thickness only adds durability on the Orca, the normal B&W poly will stop light just fine. So if this is just a one or two run deal then go cheap. (I never say that)
 
If you had to frame all 4 walls (about 105 feet) it would might be around $400 - $500 if you went budget mode (I am high, @diggs99 what do you think?) I found that 54 inch x 100 foot rolls of Orca run about 200 ish. Thats only 54 inches wide so yeah, it might actually not be much savings at all with the Orca.
 
I came up with those numbers by taking the sqrt of 700 and multiplying that by 4 to get a linear footage 105.8 , so about 70 2x3's for studs, top and bottom plates. About 26 sheets of drywall. Some cheap fasteners. Might even be able to swing a cheap $40 interior door as an upgrade if you frame the opening correctly.

I understand totally if someone doesn't want to do that because of renting or whatever, just doing the mental exercise, keeps me sharp (ish). lmao
 
Renfro said:
If you had to frame all 4 walls (about 105 feet) it would might be around $400 - $500 if you went budget mode (I am high, @diggs99 what do you think?) I found that 54 inch x 100 foot rolls of Orca run about 200 ish. Thats only 54 inches wide so yeah, it might actually not be much savings at all with the Orca.
Click to expand...

I think 4-500 is a reasonable number for 100+ ft of walls.

I would def frame and drywall and flat paint walls before orca for sure, but if lower cost is what OP is after, just b/w panda film should be fine to protect from light.
 
You must log in or register to reply here.

Similar threads

C
Anybody using a trolmaster aqua-x PLUS - nfs3?
Replies
1
Views
160
ilovetoskiatalta
ilovetoskiatalta
P
4x4 grow lights on a budget?
Replies
12
Views
2K
tstick
tstick
twalte
Is this ViparSpectra p4000 light an upgrade to my 2018 LED?
Replies
8
Views
613
Delps8
D
ProPheT 216
Looking for another light
Replies
5
Views
918
curious2garden
curious2garden
endorflight
Calcium deficiency in high pressure aeroponics
2 3
Replies
42
Views
2K
cage
C
Back
Top