Used for one grow and decided to go bigger....but....as far as PC grows go this is one of the best cases to use because of its height. This is a FULL tower case. The dimensions for this case are 24" high, 15" deep, and 7" wide. This is a plug and play PC grow case, everything needed to start a grow is included (except nutrients). Here are the rest of the features:
Lighting - Four 26w 6500K & two 42w 2700K bulbs included
Ventilation - One 120mm and one 80mm exhaust fans (upper back side)
- One 120mm intake fan (lower front side)
- All three fans connected to DC power supply
- Lexan sheet between grow and light chamber
Case - Mylar lined cardboard panels for each side of case
- Reflective taped seams
The Lexan sheet splits the 120mm exhaust fan in half so half of it pulls from the light chamber and the other half pulls from the grow chamber. As you can see in the first picture the front panel slides up and down and is in the down position to allow that split fan to pull cool air in through the light chamber.
Much more is also included:
-timer
-outlet strip (light strip plug<timer<outlet strip<wall)
-two more 80mm fans
-two more DC power supplies
-misc bag of wire nuts, crimp connectors, etc.
-velcro wire tie
-pH test kit (brand new)
-mL syringe and cup for measuring
-ONA Pro block (brand new)
-two Fabreeze activated charcoal air filters (for fans during flowering)
-two 42w 2700K bulbs for flowering (a different lighting configuration would be needed)
- hot glue gun & glue sticks
-Lakewood 5" fan for better air circulation
-extra Lexan sheets
Here are pictures:
Lighting - Four 26w 6500K & two 42w 2700K bulbs included
Ventilation - One 120mm and one 80mm exhaust fans (upper back side)
- One 120mm intake fan (lower front side)
- All three fans connected to DC power supply
- Lexan sheet between grow and light chamber
Case - Mylar lined cardboard panels for each side of case
- Reflective taped seams
The Lexan sheet splits the 120mm exhaust fan in half so half of it pulls from the light chamber and the other half pulls from the grow chamber. As you can see in the first picture the front panel slides up and down and is in the down position to allow that split fan to pull cool air in through the light chamber.
Much more is also included:
-timer
-outlet strip (light strip plug<timer<outlet strip<wall)
-two more 80mm fans
-two more DC power supplies
-misc bag of wire nuts, crimp connectors, etc.
-velcro wire tie
-pH test kit (brand new)
-mL syringe and cup for measuring
-ONA Pro block (brand new)
-two Fabreeze activated charcoal air filters (for fans during flowering)
-two 42w 2700K bulbs for flowering (a different lighting configuration would be needed)
- hot glue gun & glue sticks
-Lakewood 5" fan for better air circulation
-extra Lexan sheets
Here are pictures:
