Perm's Perpetually Peeping Pistil & Plant Parade

Big Perm said:

Man, wait until you get dialed in. You'll love it.
I have my bloom tent dialed in, and all I have to do is fill the tub every three days or so. I LST the canopy some and other than defoliating today, that's it. It's on cruise control for the next month or so. It just does it's thing. There really is no skill on my part, lol.
View attachment 4267785

Click to expand...

There was plenty of skill setting that up.

I did the 2x2 tent, also.
I reused my old buckets from the DWC days. Everything I build I try to make the whole thing without going to the store, or ordering stuff. These buckets are the bottoms of the ones I still had that I cut the tops off of for another build.

This drain and fill is temporary until I get it plumbed up to the drain and its own water tub. I'm basically going to do the same thing to my two 2x4's.

This tent is 2x2x4.


I had a lot of height to work with above the tent, so this table has been floating around my house for years. It is 20"x20". I put a 2x2 piece of plywood on top of it with brad nails and glue so that the tent would sit on top evenly.


Left over bottom part of the old buckets.


I used my calipers to scribe a line to cut. I want to save the middle parts, and not ruin them in case I want to use them later. Who knows.

My floor has a slope in it to the floor drain, I try to use it to my advantage when I can. I put in some water to see where the low side is, and put the drain there. The hole on the front right I had to offset because of the table leg.


I also put holes all about the drain tray to be able to attach bungies later for training.


A 1/2" UniSeal uses a 1 1/4" hole saw.


Since the UniSeal sticks out the bottom, I had to cut a relief in the table.

A 1 3/4" Hole saw will work.


Yes, I cut holes in the bottom of my tent. That's what this thing is for later, right?


Wow, all these years this was a cardboard table. I'm glad I used the plywood now.

Here is the hole I chose to offset for the leg.


Drain hardware laid out.

All primed and glued up.


So the way this is set up now is partially temporary. To the right are my two 2x4's. I am basically doing the same thing with them next, but not using buckets. Under those two tents are going to be the tubs for them and the tub for this tent.
I ran the plumbing with a valve so that after it is all hooked up to the drain I can still dump into a bucket to check ph/ppm or something if I want.


Remember that 600psi 1/2" PVC is a press fit on a 3/8 hose barb.

Soon I will have the other two tents done and the buckets on the floor will go away.

Big Perm said:

All primed and glued up.
View attachment 4353864

So the way this is set up now is partially temporary. To the right are my two 2x4's. I am basically doing the same thing with them next, but not using buckets. Under those two tents are going to be the tubs for them and the tub for this tent.
I ran the plumbing with a valve so that after it is all hooked up to the drain I can still dump into a bucket to check ph/ppm or something if I want.
View attachment 4353865 View attachment 4353866

Remember that 600psi 1/2" PVC is a press fit on a 3/8 hose barb.
View attachment 4353867 View attachment 4353868 View attachment 4353869 View attachment 4353870 View attachment 4353871 View attachment 4353872
Soon I will have the other two tents done and the buckets on the floor will go away.View attachment 4353873

Click to expand...

What an awesome idea nice an clean to.

jzs147 said:

What an awesome idea nice an clean to.

Click to expand...

Thanks!

I'm thinking about just making a DIY thread for all my stoner builds instead of having this be a big box of everything.

Big Perm said:

I'm thinking about just making a DIY thread for all my stoner builds instead of having this be a big box of everything.

Click to expand...

That is a cracking idea BP and we could tag that post to anyone requesting help or advise who hasn't seen your post.

This was a joke for the competition, but still here is a look at the ladies.

Big Perm said:

This was a joke for the competition, but still here is a look at the ladies.

Click to expand...

Intro is perfect that watery disolve revealing an army of colas

I don't know why I have never stopped over here man, but I'm gonna follow along you are doing great work! I love that custom little tent build.

Thundercat said:

I don't know why I have never stopped over here man, but I'm gonna follow along you are doing great work! I love that custom little tent build.

Click to expand...

Thanks man. It's a cluster of 25 pages of random crap.

Big Perm said:

Thanks man. It's a cluster of 25 pages of random crap.

Click to expand...

I'm sure there is great info in that cluster though. My thread is the same way, it has just grown from my first grow here onwards.

White Widow x2 (Seedsman)
Frisian Dew x2 (Dianfem)
2'x2'
HGL 84x
12"
12/12
Dyna-Gro

Week 5
1 week of veg after sprout, then 12/12

Great work Perm! I'm diggin your style...a lot!

Hot Diggity Sog said:

Great work Perm! I'm diggin your style...a lot!

Click to expand...

Thanks man, I've always lurked your stuff. I like the light methods.

Looking good dude, I just finished going thru entire thread. Watching your 84x review as well.