Qb 288 advice

I have purchased 4 288’s from Atreum and a hlg 480-54 driver. How would you guys wire these up, parallel or series. Also need advice on spacing on my frame, they are on individual heatsinks.

Parallel wire those boards. You need two 5-pole Wago Lever Nuts like these.....https://atreumlighting.com/products...-power-cord-wago-lever-nut-junction-connector. The Wagos connect the four 288s to the drivers DC output. That black cylinder is used to connect the driver's AC input to the wall power cord.

Divide the area you want to illuminate, divide that by four, and place one 288 in the middle of that quarter. Hope your space is 4'x4' (16 square feet) or less.

Thanks for the info. I did get the power cord kit with my driver. I am actually 45”x6’ish. I am currently running a 600hps and a set of 4 chilled pucks from rapid. I seems to be plenty, but with summer around the corner the heat from my hps is going to be harder to deal with.