NativeFarmer
New Member
hello all to all much respect is given, looking for someone to figure this out with me to much math for me and as medicated as i stay if it was not for sentinel products i would....lol and 5 heads are better than one anyways, 20by30 garage static positive at 1400 cfm 8k parabolic flow through design, now comes the problem needing solved at hand. at 8k i need 4ton split unit to maintain lower temps and need the 1400cfm scrub out also so for instance presently in introducing 1400 cfm at 40-50 deg and scrubbing the 1100 to keep positive static witch runs room perfect cfm no need for co2 during winter ok so summer is coming and 5k for ac (lg 4ton split unit) seems reasonable for the privacy and protection of my medication now if the room with installed ac operating at lets say 68deg for 12 hrs and room heats up to 72 and swamper/scrubber comes on while the ac is going to achieve the fresh air and the conversion in temp of 22deg to with the ac operates and needs to achive 40-50 deg to cool room, calculating heat exchange of 20deg should it operate with the settings of 72 for clean out and 68 for cool to achieve 68-70deg operating temp ? so now the next Q? is in room where you can stand anywhere and no hot spots due to placement of swamper and scrubber temp at hight of para 74deg temp at top of garage 62deg and in middle where sensors are 72 and pot temp is 68 and floor temp is 55deg, where would you place the units heads 4 of them ? help would be greatly appreciated im running hole grow room on 55amps so i got another 50 to spare and i need the COOL on a 100amp draw http://www.youtube.com/watch?v=BIj6fbrVMEY&feature=plcp&context=C3609001UDOEgsToPDskLCgoeHqjEauYCGY15RN_Ey here is my grow many vids to help me work this out ive done all the math i can and blew all the joints i could with amendments and i think i got it but i wanted to run it by the best growers on the net...... Thx Native Farmer