ctoomuch
Active Member
My garage is a work in progress, but here it is.
In the grow area there are four, 1000w raptor hoods with 8" vents.
They are connected to 220v receptacles in the ceiling.
I used the cords that came with them to connect the ballasts to the receptacles and made my own for the hoods. The ballasts are controlled with a pool timer
that turns all the ballasts on at the same time. There are a bank of 220v receptacles
connected to it that the ballasts plug into. The walls and ceiling are insulated and drywalled, I'm going to cover them with permaflect. Originally I was going to put the Ebb 'n Grow controller next to the res, but I decided to put it in the grow area and ran PVC through the wall for fill and drain lines. It's a work in progress but I think I have a good start. What do you think?
![Room.jpg](/data/attachments/1845/1845402-95d0022ab9cfe6e5fb322cc832f07a3e.jpg)
![2013-04-23 08.01.03.jpg](/data/attachments/1845/1845407-e5884417eb0506f07d876572e248ae3e.jpg)
![2013-04-23 08.01.15.jpg](/data/attachments/1845/1845403-9c47d2e26719939f99d56642a2ce06e6.jpg)
![2013-04-23 07.58.57.jpg](/data/attachments/1845/1845404-3a65414d5f96c0695c734c1924b23109.jpg)
![2013-04-23 07.59.52.jpg](/data/attachments/1845/1845405-aef9fcd5a1dd8530a12eb984196ac552.jpg)