sittin here... right now... quick answers
- Thread starter dbo24242
- Start date
boxofstankay
Active Member
Do you have any eggs?
great q's,
Boneman you have a pair of aces and a ten high in 5 card draw... haven't played that since I was 8 years old so I donno, I'd probably bet a nickel.
Stoney384 the earth is round because that is the way that all of the matter which makes it up sticks together because of gravity! You'll notice planets and other natural objects and stuff generally are of a round shape because that is just how things stick to one another.
Heads up - 0 1 2 3 4 5 good luck
boxofstankay you want ostrich, alligator, or chicken?
Boneman you have a pair of aces and a ten high in 5 card draw... haven't played that since I was 8 years old so I donno, I'd probably bet a nickel.
Stoney384 the earth is round because that is the way that all of the matter which makes it up sticks together because of gravity! You'll notice planets and other natural objects and stuff generally are of a round shape because that is just how things stick to one another.
Heads up - 0 1 2 3 4 5 good luck
boxofstankay you want ostrich, alligator, or chicken?
I
Illegal Smile
Guest
Why does the moon look bigger when it is low over the horizon? And why do you persist in associating with those slightly creepy bubbleheads?
Thestinker
Active Member
dbo i currently have 1 24 watt cfl daylight bulb 6500k running in my stealth pc grow, its about 1 1/2" above my pot, after germinated my seeds and planted it 2 days ago im yet to see any sign of life is this light gd enough to kick start it ? or do i need more? ( im only growin 1 plant, the growbox is fully mylar reflected)
Hey Thestinker
You won't need more light until the seed has popped from the soil and grown a bit. Maybe backing the light off an inch would be helpful in case you aren't around when it pops... they can stretch fast if you aren't there for a couple days. You said you had a taproot when you planted the seed into the soil, correct? there are a few things to check
1)don't pack the soil too tight
2)make sure no rocks or twigs are directly on top of the seed
3)loosen the soil above the seed with a pin but be very careful not to harm it
4)patience is a virtue from the tap root stage it is usually 1 to 3 days before it pops up and then it has to shed the seed casing.
if it appears to be having trouble shedding the seed casing once it is protruding from the ground it is safe to remove it yourself although its very easy to damage the seed.
Thestinker
Active Member
thanks alot bro, ill give it a go, also i read somewhere that the 6500k cfl's can be used in conjunction with the 2500k flowering bulbs whats the +'s of this and should i do it myself ? ( ive got a 25watt 1500 lumen flowerbulb awaiting use)
save your flowering bulb so you don't waste the intensity. you will need more bulbs than that for flowering.
advantages are more light for the plant but it won't need it until its a little bigger.
then in flowering you'll want the 2500k and the 6500k lights going to give it a broader spectrum and more intense light than the 2500k
Thestinker
Active Member
ok cheers +rep for your help 
ive got 2 12w WW 750 lumens each should i include them for lighting the under and sides of the plant ? ( flowering stage)
ive got 2 12w WW 750 lumens each should i include them for lighting the under and sides of the plant ? ( flowering stage)just go to the store and get 23 or 26w instead you should have like 8 of them for a plant...
look at this
http://www.electronicplus.com/images/products/738W-BOX.jpg
you can put those in a power strip say a 6 outlet strip you could stick 3 26w bulbs into and make 3 of those and put one on top and two on the sides or something you will need more lights to flower...
or somethign like http://media.photobucket.com/image/light%20socket%20splitter/29842/ef9c_1.jpg
I made something like that 4 socket one by using 3 y splitters (about 80-90 cents at the hardware store). 100w of CFLs was good for vegging some plants but I never used CFLs for flowering.
look at this
http://www.electronicplus.com/images/products/738W-BOX.jpg
you can put those in a power strip say a 6 outlet strip you could stick 3 26w bulbs into and make 3 of those and put one on top and two on the sides or something you will need more lights to flower...
or somethign like http://media.photobucket.com/image/light%20socket%20splitter/29842/ef9c_1.jpg
I made something like that 4 socket one by using 3 y splitters (about 80-90 cents at the hardware store). 100w of CFLs was good for vegging some plants but I never used CFLs for flowering.
Forgot the pix
Attachments
comptonking
Active Member
Where can you buy the 4-to-1 light socket splitter?
trader54321
Well-Known Member
if you have a crappy magnetic 400 watt ballast with home depot 400 watt hps and mh bulbs that have been used two cycles, would you plug in an agro red sun 600watt hps that you got for essentially free in the second week on flowering assuming also you plan on upgrading and revamping the op with digital ballasts in a month... how risky is the fire hazzard will there be at least 10% increase yield any input appreciated
i have two ufo led as back ups
should i save it for the new digital ballasts
sell it
use it for getting better gain from spectrum
any other options
i have two ufo led as back ups
should i save it for the new digital ballasts
sell it
use it for getting better gain from spectrum
any other options