Alright. What each of you has done is read more and more into what I have said. I guess it is to be expected but I really didn't think I would need to lay out each detail.
I guess its fine really I will answer as it goes.
I had not intended on pouring concrete on top, just for the walls. I figure wood will buckle more easily than concrete. The reason for wood is a cheap, quick fix. This doesn't have to last long, just a year or so.
12tons eh? Well. I have moved way more dirt than I thought. Really doesn't look like that much... A big ass hole but not really that much dirt came out of it...
Do we have any way of calculating that pressure that will be exerted on the walls?
And because the weight is so much more than I originally thought, I can reduce the coverage to just a foot or so of earth on the roof.
It is impossible to grow indoors where this is, therefor the need for this project. The soil isn't really needed to protect against FLIR, however having a heated area of earth next to a POB would seem suspicious to me. I had intended on routing the air to the chimney, but I assumed that there would be residual heat left over from the walls. Not worried about smell at this location, there is no one around.
I like the idea of using the shipping containers as a foundation for a home. May use that some day.
Ok so, without drawing a diagram I will go into a little detail about how I pictured this coming together.
For the foundation of the room, I intend on using cinder blocks. I don't see how this would be a problem being that many houses are built on top of cinder blocks.
For the floor joist I will be using 2x6's that will be bolted onto 4x4 post on each side. This will be the same for the rafters. For an image each stud will be a 4x4 with a total of (4) 2x6's bolted to it. 2 at top, 2 at bottom.
The flooring will be typical 25 year plywood, and the siding is treated 25 year siding. I will be reinforcing the wall by having additional 4x4 studs in place. Instead of every 16" I will do every 12". I figure the weight pressing onto the left wall will transfer through the 2x6 joist and rafters to the right side, which will be supported by the weight pressing onto the right wall. To support the weight of the roof, I intend on having additional 4x4's connected to each rafter and joist directly in the middle of the room. For an image, there will be a total of (3) 4x4's bolted to (2) 2x'6s, spanning from left to middle to right. I haven't decided if having an arched roof would be better, a slant, have the roof come to a point, with the middle higher like most houses. (A pyramid shape). I figure having an angle of some sort will help displace water, and weight somewhat.
For the concrete walls, as I said I was thinking more to protect the wood from the elements, more than strength. I intend on covering the room in either tar, or some plastic sheeting.
For the walls however I intend on building a box for the walls however thick it needs to be, I had intended on running rebar, how else would the wall stand?
For drainage, I assumed having the pocket underneath the room would gather what little water there was, that would eventually soak into the earth. For plumbing I intend to install a water pump to pump used water out. I will be bringing fresh water in manually.
I worked and lived on a boat for years, where everything is compacted into tiny spaces, I am not worried about space. 8x12 will be plenty of room for me to do what ever I need to do.
Maybe I am so stupid that this doesn't seem complicated or a big deal... Why is everyone so no,no,no about it? Does anyone have any experience?
I appreciate everyone looking out for my health, that is why I am here because I treasure it.
Everyone said no,no,no to me about starting my business, but I did anyways and I made money. . .