Stelthy's 600W Hps Project! (New-Cab)

stelthy

Well-Known Member
OK. We'll start with a couple of questions. How many green lights are you putting in there? That big tube and the 4 small ones? If so, is there a reason for so many? Cab is coming along awesome, looks like your getting near the end, any eta set for gettings some girls in there. I am currently doing a scrog using 2 600w lights in a grow area that is 3.5feet tall x 8 feet wide x 3 feet deep. Last run was my first run with this new setup and I ended up harvesting 2lbs of herb and 3oz of hash. Have you considered setting up a scrog? I think it would be key in keeping your the height of your plants under control. And provided you veg long enough and keep your girls fairly healthy, I think you could hit a pound easily. Heres a link to my grow..
https://www.rollitup.org/grow-journals/221186-balls-out-first-grow-whie.html
And if you havent been here yet, this is the link to the 600w club, lots of nice and helpful guys and some really nice grows

https://www.rollitup.org/indoor-growing/285620-club-600-a.html
And just so you know what Im working with, here's a shot of my last grow...
Hi dude, cheers for re-posting :) I am only going to use the big green tube this time around, I figured it'd look tidier and its well easier to install, and provides a much brighter coverage of light :) I'll keep hold of the other 4 lamp holders etc... as they may come in useful in the future :) Yeah the cabs really starting to come along I unboxed the CCTV for it today I'll install that soon. I have some housing inspector peep's coming over in a week or 2, after that I shall cut the hole in my bedroom ceiling and install the ducting, fan and odor sock in my loft and then add my seeds to the pots ....so I estimate 1 month and I'll have 2 baby girls in there :) I ve never done a scrog before so any tips are more than welcome.. you really think I could pull a pound from just 2 plants using scrog method ?? that'd be cool :) I've added some input on the DST CLUB 600 thread its a cool thread, I 'll browse through yours in a min, hope alls well, cheers - STELTHY
 

Integra21

Well-Known Member
Yeah, I already know its possible. To give a better breakdown, I'll use the only the left side of the screen for an example. On the last run The left side had 3 Blue Kussh clones that were vegged to a height of approx 18" before I flipped to flower. For strain info, Blue Kush isnt a heavy yielder, but ranks in about average, and my friends growing the same strain had below average results. Anyways, those 3 plants were in a 5 gallon res that they shared. The screen that they filled was only 3'x4'. And those 3 plants gave me 16oz3g of premium bud, no popcorn fluff in that weight. And they had their own 600w light. So, seeing how similar your setup is to mine in size and wattage, you could easily get that with some decent genetics. What Im really aiting on is to see what my setup can do with some heavy yielders wiich I will be running on the next grow which should be some time in august. But I think you'll really need to use the scrog method to pull it off. I would be happy to help with any questions you might have. It is actually a real simple process, it just seems complicated.
 

stelthy

Well-Known Member
So I should veg them up to 18", then apply a scrog screen... does it matter how big the squares are in the screen?? I plan on growing a couple of different strains from KIWI Seeds ie/ Alegria and Mount Kush... do you weave the plants through the screen or just bend them under it?? and do I need to lollypop them..if so to what height?? .. many thanks - STELTHY
 

420BongRips

Well-Known Member
Jesus, I've read most of the posts on this thread since page 1, for the past 3 hours lol, that was some interesting shit, you're creative as hell man. How is the stuff coming along?
 

stelthy

Well-Known Member
Btw, subbed and rep
Hi dude glad you've found my thread interesting so far :) and cheers for the REP. all is going well, I'll try to crack on and mod it some more this week I'll update and add pics when I can, So much I still plan to do .. but am eager to plant some seed's soon :) - STELTHY
 

stelthy

Well-Known Member
My 'LIST OF STUFF TO BUY' is a bit shorter now and reads as follows :-

*250w HPS bulb
*400w MH bulb
*400w HPS bulb
*600w MH bulb
*Best timer suitable for a 630w max load (inc. lumen boost facility)
*2X UV-B reptile lamps for forcing THC
*5m of 6" insulated ducting
*2X 6" Odour Socks 1 short, 1 long
*3 big lock n hasps + keys (security)
*Speaker Grills
*Small stereo + speakers + rainforest sound track
*2X ONA blocks
*2X attic roof fans (air circulation) - wired together
*Fire extinguisher
*MDF + wood lengths
*Hinges
*Chopper Stopper
*Black carpet
*Emultion
*Black gloss paint

And thats all I have left to buy :) - STELTHY
 

chainseeker

Well-Known Member
Jesus, I've read most of the posts on this thread since page 1, for the past 3 hours lol, that was some interesting shit, you're creative as hell man. How is the stuff coming along?
I have to agree. I've read and followed allot of the cab growers on riu and other sites. Stelthy your's take the cake, by far the best cab Ive seen and getting better. Glad your back.
 

stelthy

Well-Known Member
Glad you like it Chainseeker, and I am glad to be back :) have you any surgestions of anything I ve missed or could still bennifit from ? I am 99% sure I have all aspecs covered but all input is more for me to think about and utilize where necessary I hope the rest of my build goes as well as it all has so far :) - STELTHY
 

FRESHSMOKE

Active Member
ive sat here for an hour reading this whole thred , im amazed at your grow, you take alot of care into small detail'good for you'.

can i ask are the bulbs for all 3 ballasts inside the cab at once so when switching on a cold day the 600W bulb to a hot days the 250W bulb you dont need to open up the cool tube and swap the bulb or how are you getting around that.
are all the extra CFL's for extra light or do they have an extra purpose lol ?
im really interested in your grow and thankfull i joined so late so i had a nice read or i would be checking every 2 mins too see if you updated.
hope all goes well for you im deff subscribing :)
 

Integra21

Well-Known Member
My 'LIST OF STUFF TO BUY' is a bit shorter now and reads as follows :-

*250w HPS bulb
*400w MH bulb
*400w HPS bulb
*600w MH bulb
*Best timer suitable for a 630w max load (inc. lumen boost facility)
*2X UV-B reptile lamps for forcing THC
*5m of 6" insulated ducting
*2X 6" Odour Socks 1 short, 1 long
*3 big lock n hasps + keys (security)
*Speaker Grills
*Small stereo + speakers + rainforest sound track
*2X ONA blocks
*2X attic roof fans (air circulation) - wired together
*Fire extinguisher
*MDF + wood lengths
*Hinges
*Chopper Stopper
*Black carpet
*Emultion
*Black gloss paint

And thats all I have left to buy :) - STELTHY
Just a heads up, the UVB bulbs are awesome, but make sure to keep them a minimum of 12-16" away from your plants. If you get them much closer than that, I started getting abnormal plant growth and the closer the buds were to the bulb, the smaller they were. But they were super frosty, and so were the ones in the 1-2foot range. As far as the music, I have been planing on doing that myself, but from all that I have read and the mythbusters special on it, plants seem to like loud bassy music like death metal. Anything with a lot of screaming and bass.
 

stelthy

Well-Known Member
ive sat here for an hour reading this whole thred , im amazed at your grow, you take alot of care into small detail'good for you'.

can i ask are the bulbs for all 3 ballasts inside the cab at once so when switching on a cold day the 600W bulb to a hot days the 250W bulb you dont need to open up the cool tube and swap the bulb or how are you getting around that.
are all the extra CFL's for extra light or do they have an extra purpose lol ?
im really interested in your grow and thankfull i joined so late so i had a nice read or i would be checking every 2 mins too see if you updated.
hope all goes well for you im deff subscribing :)
Due to limited space, I will have to manually change the HID bulbs even though the ballasts will all be connected to a remote switch, I have decided to make a DIY net screen that is easy to clip and unclip from the end of the cool-tube instead of using an odor sock, I figured that way I can still stop bits of plant crap etc from entering the tube, dirtying the glass and or causing a fire risk, and still getting good if not better air flow :) I have a row of 5 CFL hangers to allow for a low watt/low power/low heat grow running a min of 2 will = 250W and a max of 5 between 625W & 1250W depending if I use 125W bulbs or 250W bulbs... I thought at first its a better way to control temps, if temps get too much but then I thought 'you know what..... Fuck it! -I'll go all out and I can do a propper CFL grow as and when I want to...' so basically its like my cab is capable of multi-tasking :) , Cheers for subbing its always good to see a new face ..(so as to speak) hope you enjoy the ride, still way more to go yet - STELTHY
 

stelthy

Well-Known Member
Just a heads up, the UVB bulbs are awesome, but make sure to keep them a minimum of 12-16" away from your plants. If you get them much closer than that, I started getting abnormal plant growth and the closer the buds were to the bulb, the smaller they were. But they were super frosty, and so were the ones in the 1-2foot range. As far as the music, I have been planing on doing that myself, but from all that I have read and the mythbusters special on it, plants seem to like loud bassy music like death metal. Anything with a lot of screaming and bass.
So Keeping the lights between 12" and 16" away will not only let my top cola's grow to their desired size but will also inflict the growth of extra THC!?? am I right in saying the plants only need 5 or 10 mins of U-VB per day before the propper lights go on at the end stage of growing :) ? and a Max of 30 mins per day 2 weeks prior to harvest a total of about 3 weeks use, so building up from 5mins to 30 mins, or is it ok to use the 5-30 min programme all the way up to harvest? On the music front I heard that its not entirely music that helps, your right about the bass though, what really work is the vibration from the bass.. it causes the plants main stem and branches to believe its in a very windy spot, and allow's it to strengthen its branches etc so it can hold more weight from its buds :) I am pretty sure it increases the size of the yield too - ALL good!!! :) I have thought of a way in which to put this into practice.. a couple actually, .. You/I could use a minus frequency known as 'brown-noise' typically a freq. that if played at the correct volume will actually make a human shit him/herself lol, (to do with the vibrations) How ever this is as far as I am aware fictional. But the frequency is duely noted for other concerning bodily functions, but still.... the out put of these frquencies do = big vibration (my point) :) and experiment with other frequency's in that area for the effect on plant growth, my 2nd Idea kinda assist's my 1st idea but allows other types of music (not just bass-lines) its possible to play the music through a sub-woofer for a bass heavy output without connecting up the normal speakers as well, the only downside is that it will bring unwanted attention to the grow area... or you could use an 8+ " bass speaker and cut the curved middle section of the speaker out leaving only bass vibrations with out any sound content at all, I think if you mount the 'hacked' speaker at the base of your plant the vibrations will penetrate up through the plant (smallest tightest sound waves at the bottom, and biggest wide spread sound waves penetrating the top) Experimenting with volume/power is the main priorty to gain the correct 'wave-vibrations' but I have every confidence that once the correct combination of Sound/Power and Out-put has been configured that the results will speak for them selves, However I do still plan on playing peaceful 'rainforest' sounds just for the chilled gardening experience :) I dont know for sure or not if they react to high trebel output but again in the name of science it may be something worth experimenting with! Cheers for the input Integra21 :) - STELTHY
 

stelthy

Well-Known Member
Brown note
From Wikipedia, the free encyclopedia
For similar phrases, see Brown note (disambiguation).
Contents [hide]
1 Television show tests
2 Physiological effects of low frequency vibration
3 See also
4 References
The brown note is a theoretical infrasound frequency that would cause humans to lose control of their bowels due to resonance. There is no scientific evidence to support the claim that a "brown note" (transmitted through sound waves in air) exists.
The name is metonymy for the color of normal human feces. Frequencies supposedly involved are between 5 and 9 Hz, which is below 20 Hz, the lower frequency limit of human hearing. High power sound waves below 20 Hz are felt in the body, not heard by the ear as sound. The only other vibrations titled with colors are the colors of noise.
[edit]Television show tests

The brown note was tested on the television show MythBusters using twelve Meyer Sound 700-HP subwoofers—a model and quantity that has been employed for major rock concerts.[1] Normal operating frequency range of the selected subwoofer model was 28 Hz to 150 Hz[2] but the twelve enclosures at MythBusters had been specially modified for deeper bass extension. The Meyer Sound team, under the direction of Schwenke and John Meyer, devised a special test and measurement system in order to test the theory at levels far beyond that experienced at any concert, and at far lower frequencies. Twelve 700-HP ultrahigh-power subwoofers had their input cards modified to allow deep subsonic frequencies, and their ports plugged to prevent a loss of efficiency at frequencies below their normal operating range. The modified cabinets were then stacked three high and faced inward in an open ring configuration. Test signals were generated by a SIM 3 audio analyzer, with software modified to produce tones down to 5 Hz. A precision B&K sound level analyzer fed by a model 4189 microphone and ZF 0023 attenuator measured levels.[citation needed] The experimenters on the show tried a series of frequencies between 5 and 10 Hz at a level of 120–153 decibels of sound pressure, but they were unsuccessful in producing the rumored effects. The test subjects all reported some physical anxiety and shortness of breath, even a small amount of nausea, but this was dismissed by the participants, noting that sound at that frequency and intensity moves air rapidly in and out of one's lungs.
Another show, Brainiac: Science Abuse, claimed to have performed an experiment using 22.275 Hz (according to the show's producers used by Japan's police and tested by the French military). During the program, they broadcast the note over the air (and into the living rooms of viewers) in an attempt to cause bowel movements among those who had chosen to stay in the room despite repeated warnings and opportunities to leave. However, sound at this frequency at a significant volume cannot be generated by television speakers, nor by most subwoofers, nor by the cassette-tape boombox used to generate the note for the test subject. They also alleged to have confirmed the myth with a subject, but this subject was out of camera shot for all of the piece except at the very beginning.
[edit]Physiological effects of low frequency vibration

Jürgen Altmann of the Dortmund University of Technology, an expert on sonic weapons, says that there is no reliable evidence for nausea and vomiting caused by infrasound.[3]
Loud concert levels of subwoofer arrays have been cited as causing lung collapse in individuals who are very close to the subwoofer, especially for smokers who are particularly tall and thin.[4]
In September 2009, London student Tom Reid died of sudden arrhythmic death syndrome (SADS) after complaining that 'loud bass notes' were 'getting to his heart'. The inquest recorded a verdict of natural causes, although some experts commented that the bass could have acted as a trigger.[5]
Air is a very inefficient medium for transferring low frequency vibration from a transducer to the human body.[6] Mechanical connection of the vibration source to the human body, however, provides a potentially dangerous combination. The U.S. space program, worried about the harmful effects of rocket flight on astronauts, ordered vibration tests that used cockpit seats mounted on vibration tables to transfer "brown note" and other frequencies directly to the human subjects. Very high power levels of 160 dB were achieved at frequencies of 2–3 Hz. Test frequencies ranged from 0.5 Hz to 40 Hz. Test subjects suffered motor ataxia, nausea, visual disturbance, degraded task performance and difficulties in communication. These tests are assumed by researchers to be the nucleus of the current urban myth.[7]
[edit]See also

Infrasound
Brown noise
"World Wide Recorder Concert", a South Park episode
[edit]References

^ "Brown Note". Meyer Sound. 2000. Retrieved 2006-08-30.
^ Meyersound 700-HP UltraHigh-Power Subwoofer datasheet
^ The Pentagon considers ear-blasting anti-hijack gun — New Scientist
^ Wired. Music Fans, Beware the Big Bass
^ Loud bass music ‘killed student’ Tom Reid, Metro, retrieved 18 June 2010
^ Tempest, W. Infrasound and low frequency vibration (1977). Academic Press Inc. (London) Ltd
^ ProSoundWeb: some effects of low end (bulletin board entry by Tom Danley)

This page was last modified on 22 June 2010 at 03:41.

So yeah..It looks fictional but the fact is certain hertz = big vibrations, cut out the noise and we have pretty much what were looking for :) - STELTHY
 

stelthy

Well-Known Member
Developed though it's best known as a pest-control method, high-frequency sound could find new agricultural uses, including accelerated plant growth, results, the effects of ultrasound, graphs.
May/June 1984 By TJ Byers

Image Gallery
The results of one experi ment showed a dramatic increase in growth rate with ultrasound stimulation.
ARTICLE TOOLS
Image Gallery
Print
E-mail
Comments
RSS

Though it's best known as a pest-control method, high-frequency sound could soon be used for . . .

RELATED CONTENT:-

In an effort to keep you informed about the latest developments in the scientific and electronic worlds, I regularly devote time to reporting current (as well as, occasionally, forgotten) technology. Two issues ago—in MOTHER NO. 85-I discussed some experiments in which photovoltaic cells were used to stimulate the roots of plants, resulting in a significant increase in their rate of growth.

And, as it happens, I recently found yet another intriguing report... one which claims that a plant's growth can be speeded up by subjecting the greenery to ultrasound. "Now this," I thought, "is a new twist."

ULTRASONICS

Judging by your overwhelming response to the article on photovoltaic root stimulation, I'm sure that many of you will be anxious to give this new technique a try. Once again, though, let's start by discussing the principles behind this exciting development.

Sound is vibration that travels through air. Without those molecules of nitrogen, oxygen, carbon dioxide, etc., there would be no sound: A telephone ringing in outer space would go unanswered even if an astronaut happened to be floating by, because no one could hear it. Sound vibrations come in a wide range of frequencies. The audio range—which extends up to about 20,000 vibrations per second (cycles per second or CPS)—includes those frequencies that people can hear. Of course, some individuals do hear better than others. Women, in particular, can usually detect noises that are of too high a frequency for men to hear. And most animals exhibit hearing capabilities superior to those of humans. Many insects, for example, can produce and hear frequencies that are beyond our limitations.

When the frequency of a sound extends beyond our normal hearing limit, we have ultrasound. Fig. 1 illustrates the sound frequency range from 0 to 50,000 CPS and shows the hearing capabilities of humans and several animals.

ACCELERATED PLANT GROWTH

The possibility that plants might respond to sound waves was explored to some extent more than a century ago. Charles Darwin, the famous evolutionary theorist, was convinced that sound could benefit plant growth. He even attempted—without success—to stimulate plant growth with notes from the bassoon and other musical instruments. Similar tests were performed by the eminent German plant physiologist Wilhelm Pfeffer, with the same negative results.

Early experiments were largely confined to using frequencies in the audio range, and most of those tests were done with frequencies so low that they could actually be felt by humans. It wasn't until the development of electronic oscillators that scientists were able to experiment with ultrasonic plant growth acceleration. The better-equipped researchers discovered that the effect only becomes noticeable at frequencies higher than 20,000 CPS and that the benefit continues to increase up to about 50,000 CPS.

ACTUAL RESULTS

The report I ran across discussed the effects of bathing radishes in ultrasound. One flat of seeds was placed in an environmentally controlled chamber with 50,000 CPS ultrasound piped in at an output of about one watt; the second group (called a control) was set in an identical chamber but did not receive exposure to ultrasound. Artificial lighting was switched on in both chambers for 12 hours each day (during which time the experimental flat received ultrasound). Both groups were watered and cared for equally.

After about seven days, the seeds in both trays began to sprout. One week is just about the normal germination period for radishes, so up to that point in the experiment, ultrasound didn't seem to offer any benefit.

It soon became apparent, though, that the seedlings receiving ultrasound treatment were growing much more rapidly than their control counterparts. In fact, by the fourteenth day the experimental plants were half again as tall as the ones in the "quiet" chamber.

The experiment continued for 28 days, the same period of time used in the photovoltaic root stimulation tests. By the end of the test, the plants treated with ultrasonic vibrations had grown an average of 87% taller than their control cousins. (The actual growth rates are shown in graphic form in Fig. 2.) Repetitions of the experiment were run to confirm the initial results, and some of the later tests showed growth rate increases of as much as 150%!

It isn't exactly clear why ultrasound stimulates plant growth. Evidence seems to support the theory that the sound acts as a catalyst, activating the production of plant hormones called auxins. As was the case with photovoltaic root stimulation, however, concrete explanations will have to wait for further research.

LET'S GIVE IT A TRY

Since seeing is believing, you'll probably want to stage your own experiment. This test will be a little more involved than the one we used for photovoltaic stimulation, but it's still not difficult to perform.

Your first (and main) problem will be obtaining an ultrasonic generator of suitable quality. Commercial generators are too expensive for most of us to buy simply to satisfy our curiosity, but you might be able to use one owned by a high school or college. Also, most TV repair shops keep an ultrasound generator on hand, even though they rarely need it. (If you try to strike a deal to borrow or rent a generator from one of these sources, be sure that the unit has an output of at least one-half watt.)

And there's yet another possible source of high-frequency sound. Have you seen advertisements for rodent-repelling machines? Such devices are simply frequency generators that supposedly scare away the varmints by flooding a room with high-intensity ultrasound. These devices could be just the ticket . . . except that they, too, are pretty pricey. Better ones cost up to $100, and the $20 models probably won't work for our purposes. If you already own a good-quality "rat ridder", though, it will serve well for your experiment.

If none of the above possibilities bear fruit, you can build your own ultrasonic generator. It's not a difficult electronics project, and the device can be assembled for under $20 from parts available at a local Radio Shack store. The schematic (Fig. 3) shows the layout; the only other thing you'll need is a 12-volt power supply. Either a battery eliminator or a car battery will work.

There's some evidence that higher frequencies stimulate greater growth, so you might experiment with your homemade generator by changing the value of the capacitor listed as C1. If you substitute a capacitor smaller than the one shown, the frequency will increase. Also, don't be tempted to use a conventional speaker instead of the tweeter called for in the design. Normal speakers aren't capable of reproducing the high frequencies that we're looking for.

For your experiment to have any validity, the two groups of plants you use will have to be well separated from each other. The ultrasonic generator will fill an entire room with the high-pitched squeal, but walls and doors will block quite a bit of the noise. Still, distance provides the best assurance that your control group isn't benefiting from the ultrasonic stimulation.

During the course of your experiment, you might find it interesting to change the timing cycle from that used in the original research. Unlike photovoltaic stimulation, ultrasound also benefits plants that are in bright sunlight. Tests have even shown that, with ultrasonic treatment, plants will grow in the dark!

ANOTHER CATCH

As your experiment progresses, you'll discover that ultrasonically stimulated plants show some side effects. Though treated plants do grow taller, they seem to do so at the expense of fullness of foliage. The control plants will be robust but short, while the experimental group will be tall, spindly, and darkly pigmented. Apparently, the stimulated plants aren't able to absorb nutrients fast enough to keep up with their accelerated growth rate.

Once the sound is removed, however, the plants will produce normal foliage. And if your results are similar to the ones I've investigated, the experimental plants will remain larger than their normal counterparts.

What is the answer to conquering this apparent problem of plant starvation? I don't know . . . but maybe some clever research by one of MOTHER's readers will turn up some clues. I wonder what would happen if you combined photovoltaic root stimulation with ultrasound.........

ULTRASONIC PLANT STIMULATION
(Page 2 of 2)
May/June 1984 By TJ Byers

The Effects of Ultrasound

Unfortunately, ultrasound isn't without side effects. Though there is no strong evidence that the high-frequency waves are damaging to humans, scientists are exercising some caution about its widespread use. Also, though the frequency used for plant stimulation is well above the limit of human hearing, some animals can perceive it and may be hurt.


For rabbits, mice, gerbils, and monkeys, continued exposure to this sort of sound can cause lackluster appetite, loss of weight, and (in extreme cases) even death. If you have pets, you should keep in mind that ultrasound is earsplitting to those creatures that can hear it. (A small insight) - STELTHY
 
what fan are you using to vent?? is it that little yellow one you sohuld up thet and u that small one for intake i mean im not sure in a small area like that i use a 4 by 4 by 7 box n i use a 600 watt currently since its summer in a cool tube n i have a 500 cfm duct fan. b4 i had the cool tube i had heat problems over the summer months but the ciool tube did it for me n an a nice asaulating fan
 

stelthy

Well-Known Member
I found this info on CC FORUMS its all relavent...

Re: Sound and increased plant growth? [Re: blueridge_bandit]
frmrgrl

Ganja God


Registered: 08/24/03
Posts: 5493
Loc: Ridin' the storm out
Just one examination
Quote:
Reports of the growth of many record-breaking fruits have also been attributed to music. For example, French scientists have cultivated a 2 kilogram tomato, and British scientists have produced a 13 kilogram beet (Hou and Mooneyham, 1999). This technology and field of study have come to be known as acoustic biology. However, most of these reports lack support from advanced scientific theories and precise instruments to measure the actual changes in plants.

Many of these reports attribute the plant's ability to "sense" music to it's natural "sound system", or the meridian system, similar to those found in animals, as demonstrated by Hou and Li. This system is based on the ancient Chinese meridian theory. Based on this theory developed in Tsing Hua University in Beijing, the He-Ne laser Doppler vibration 4 instrument was invented (Luan and Hou, 1993). By means of this instrument, spontaneous and external sound wave frequencies of plants have been measured, spectrum analysis have been performed, and a special wave generator with 7 frequencies between twenty to two thousand hertz have been built.

This so-called agri-wave technology has 2 components: The first one being the bombardment of sound waves (physical fertilizer), and the second one being the introduction of a minute amount of micro elements to the leaves (chemical fertilizer). This increases the yield and quality of the plants and fruits (Hou and Mooneyham, 1999). The general consensus of the research done on agri-wave technology is that it relies a lot upon the plant meridian system. Although all of the research papers surveyed have not been able to cite or explain the cause of increased plant growth, they have attributed the increase in fruit yield, quality, etc to the positive effects of the external frequencies on the internal frequencies of the plant, i.e. the meridian system.

Hou et al have measured the meridian characteristics of phylodendron plants and found that the sound waves emitted from the plant are in the range of 10 to 240 hertz, with the peak being in the range of 50 to 100 hertz. They have also found that when frequencies of 80, 100 and 150 hertz were used to stimulate the plants, 100 hertz had the best results, increasing the plant's produced wave forms from 7 dB to 22 dB .
Bass frequencies are 250 hertz and below. The more thumping, the better. Jungle music.

There was a member here a few years ago growing 20 pounders using Sonic Bloom.

And now I'll leave this topic alone, unless anyone has anything to add :) my next post will be more of my cupboard etc..... what shall I do today hmmm? More posts coming soon - STELTHY
 

stelthy

Well-Known Member
Hey bro, hows the cabinet coming along?
Hi dude, its coming alone just fine, we've had a heat wave here for the past few days so have been out in the pool for most of it enjoying cold beer and bbq food, anyhow more update's coming soon thanks for being patient :) - STELTHY
 
Top