Stinkbud Method Strain Compatability Guide

GringoLoco

GringoLoco

Well-Known Member
Strain: Durban Poison from Dutch Passion
Type: Sativa with a dash of Indica
Clone Time: 3-5 days
Flowering Time: 7-8 Weeks
Stretch: Some
Yield: Between 3/4-1 oz per plant w/o CO2
Trim Difficulty: Medium-hard, very sticky
ppm: 2200 Veg - 2700 flowering
General: This continues to be a wonderful plant to grow; she has a wonderful anise scent and nice fat colas, does very well when topped. Grew this strain in DWC first with decent results, but when I switched to the SB system (Using GH nutes), the results from clones from the same mother were visibly apparent. I then broke down and switched over to Botanicare nutes following SB's recipe to a tee and could not believe how much better she performed, almost triple the yield from the first DWC try! StinkBud Technology rocks!
This strain has made great medicine for me as it takes sometime to build up tolerance, offers the one toke pick-me-up during the day, and a couple of rips to put me to sleep at night.
 
orzz

orzz

Well-Known Member
Great idea Chef +sub +rep
When I get finished with this go round I'll post the results for ...

  • Purple Erkle
  • Purple Kush
  • F13
  • Sour Desiel
Ought to be done around the 4th of July.
 
Maybetomorrow

Maybetomorrow

Well-Known Member
Strain: ICE from Nirvana Seeds
Type: Hybrid mix
Clone Time: 5-7 days
Flowering Time: 6-8 Weeks
Stretch: little
Yield: half oz - full oz w/o co2 Can't wait to see what it does with co2
Trim Difficulty: Very easy when wet very hard when dry
ppm: 1800veg 2200 flowering ( could be more but tips burned at 2300 ppm
General: Great looking plants and very manageable. Looking to seeing the clones in the next batch to see how they come to compare.
 
T

Talisman

New Member
I don't think I have ever even heard of anyone going over 1700 ppm and I see burn at much lower levels. I don't reccommend you go over 1000 until late in flower and well I just cant believe you are up to ppms of 3500 or even 2500 and not killing everything on that sys. I call bs..:hump:
 
Maybetomorrow

Maybetomorrow

Well-Known Member
Talisman said:
I don't think I have ever even heard of anyone going over 1700 ppm and I see burn at much lower levels. I don't reccommend you go over 1000 until late in flower and well I just cant believe you are up to ppms of 3500 or even 2500 and not killing everything on that sys. I call bs..:hump:
Click to expand...
Please read this thread before knocking our research. https://www.rollitup.org/hydroponics-aeroponics/116859-harvest-pound-every-three-weeks-636.html

Once you read that come back here and re-post your statement. Are you growing with this system? If not then what are you growing in.

You have to give us some background on what you are growing in so we can understand your statements about our ppm's being way to high!
 
whysohigh

whysohigh

Well-Known Member
Talisman said:
I don't think I have ever even heard of anyone going over 1700 ppm and I see burn at much lower levels. I don't reccommend you go over 1000 until late in flower and well I just cant believe you are up to ppms of 3500 or even 2500 and not killing everything on that sys. I call bs..:hump:
Click to expand...
ill take pics or videos what do you need for proof? ill calibrate my tds meter and take a reading all in one shot, i run an average of 2600ppms to 3200ppms. you must be new to this, theres lots of great info on this site for beginners. just do some searches and you can really learn a lot.
 
T

Talisman

New Member
Never! Ever! Ever! heard anyone talk about PPM over 1700 much less 3500. You people must be nuts. I have seen burn with under 1100 and yes in early flower so 3500 ppm is just nuts period. Don't believe it never will. Love to see a plant that is in a ppm rez at 3500 ppm it will be dead!!! or is everyone and I mean everyone until this thread just crazy??? Don't think so... Must say it is irresponsible from my point of view to state those ppms levels on here. Plants can't survive at those levels. So unless I am wrong must say go fuck yourself for lieing and saying that shit...
 
T

thecholochef

Well-Known Member
Talisman said:
Never! Ever! Ever! heard anyone talk about PPM over 1700 much less 3500. You people must be nuts. I have seen burn with under 1100 and yes in early flower so 3500 ppm is just nuts period. Don't believe it never will. Love to see a plant that is in a ppm rez at 3500 ppm it will be dead!!! or is everyone and I mean everyone until this thread just crazy??? Don't think so... Must say it is irresponsible from my point of view to state those ppms levels on here. Plants can't survive at those levels. So unless I am wrong must say go fuck yourself for lieing and saying that shit...
Click to expand...

Obviously you have no fucking clue about the system we are running, go do some reading, or not. i dont really care, but keep your senseless bs posts off of here. this is for people running a certain system, so please be a tard in silence. thanks

:dunce:
 
T

Talisman

New Member
Sure like you have a space system no one has ever heard about. LOLOLmyassoff. What kind of magic system plants can take 3500 ppm of nutes?? Please PLEASE tell us all. Or don't. If you don't explain then you are full of shit and well never seen any system at 3500 ppm not kill everything in it.... You are a moron is what I am thinking right now but you have the right to explain, Bet you won't....:dunce:
thecholochef said:
Obviously you have no fucking clue about the system we are running, go do some reading, or not. i dont really care, but keep your senseless bs posts off of here. this is for people running a certain system, so please be a tard in silence. thanks

:dunce:
Click to expand...
 
D

disposition84

Well-Known Member
Wow, everyone calm down and take a smoke break = P This is a discussion forum and were all on the same side here!

I'm curious as well what leads to your specific system allowing for higher PPM?

I experience burn with my White Label WW past much lower levels, peaking at about 13-1500 ppm during later weeks of flowering and my system, the aeroflo isn't all the different from stinks.
 
T

Talisman

New Member
Ps. !!! Just how many systems do you think are out there to grow in. DUDE!!? There is basically two, thats right, TWO,2, 1-3. You can you a variety of water soiless based set ups but all are basically hydro, you know the term yes, water, no dirt! And or dirt. So which is it. Hydro, dirt, fogger, (dirtless again), edd and flow, again no dirt, areo, again just another type of hydro. Please tell us the magic system that allows for 3500 PPM... I use sprayers in tubes hydro, thats right no dirt again.... LOL Can't wait to hear what you have because no one else has ever talked about any system with 3500 PPM!!!!!:lol:
Talisman said:
Sure like you have a space system no one has ever heard about. LOLOLmyassoff. What kind of magic system plants can take 3500 ppm of nutes?? Please PLEASE tell us all. Or don't. If you don't explain then you are full of shit and well never seen any system at 3500 ppm not kill everything in it.... You are a moron is what I am thinking right now but you have the right to explain, Bet you won't....:dunce:
Click to expand...
 
T

Talisman

New Member
So tell us PLEASE of the magic space system. I can't find anything from stink on a new system that would allow for 3500 ppm... Ok your turn ....
Talisman said:
Ps. !!! Just how many systems do you think are out there to grow in. DUDE!!? There is basically two, thats right, TWO,2, 1-3. You can you a variety of water soiless based set ups but all are basically hydro, you know the term yes, water, no dirt! And or dirt. So which is it. Hydro, dirt, fogger, (dirtless again), edd and flow, again no dirt, areo, again just another type of hydro. Please tell us the magic system that allows for 3500 PPM... I use sprayers in tubes hydro, thats right no dirt again.... LOL Can't wait to hear what you have because no one else has ever talked about any system with 3500 PPM!!!!!:lol:
Click to expand...
 
T

thecholochef

Well-Known Member
hahaha! you are something else. there is a thread that is over 600 pages long, go read it. im not here to explain anything to you, so once again just go back into your corner. this is not a thread to try and convince your fucking ass that 3500ppm is possible. if you look your the only person flipping out about it. when the people who are actually RUNNING the system are not. so, kindly go run into oncoming traffic. :finger:
 
C

chronicj69

Well-Known Member
thecholochef said:
hahaha! you are something else. there is a thread that is over 600 pages long, go read it. im not here to explain anything to you, so once again just go back into your corner. this is not a thread to try and convince your fucking ass that 3500ppm is possible. if you look your the only person flipping out about it. when the people who are actually RUNNING the system are not. so, kindly go run into oncoming traffic. :finger:
Click to expand...

LMAO! :clap::clap:bongsmilie
 
oldmandroman

oldmandroman

Active Member
hi all im wit the guy u started this thread stinky bud an people who know him help me out even tho it sound crazy if u read the thread you will see it been done by slowly raising the ppm to find the max for YOUR STRAIN


but my only question is im flowering now my ppm is 1200

plant drinking all the water every two dall like 3 gallons

do i rasie the ppm up till they drink half water the amount every two days or should i lower it im having trouble wit that
 
T

Talisman

New Member
Knew you were just giving out false information. No system supports a plant in 3500 PPM. You say thread, WHERE! hahaha. I have read them all bye t he way big mouth and never has anyone including stink advocated over 1700 ppm. You are just telling bs and that is why I am irrate about the info you post because people that don't know might actually do what your dumb ass tells them and they will kill there plants. So fuck off, I mean that in a nice way of course, and either put up or admit you are just a junkie little boy making up total TOTAL BS!!!!! 3500 PPM will KILL YOUR PLANTS people do not pay this thead any attention. Worthless people post worthless dangerous info and then as in this case don't back up their statements with anything but it is written somewhere out there so go look. LOLOL. right!!! Have read everything about PPM and once again never ever never ever has anyone ever, did you get that, NEVEREVER said go anywhere near that ppm level. Think people get it now that you are full of it.... Stay off the site or learn more before you post this nonsense... Or for the last time, PROVE IT with sources, links, where to find, this suppossed stink thread that says what magic system uses 3500 ppm..... OK enough said. Idiot :roll:
thecholochef said:
hahaha! you are something else. there is a thread that is over 600 pages long, go read it. im not here to explain anything to you, so once again just go back into your corner. this is not a thread to try and convince your fucking ass that 3500ppm is possible. if you look your the only person flipping out about it. when the people who are actually RUNNING the system are not. so, kindly go run into oncoming traffic. :finger:
Click to expand...
 
TokinPodPilot

TokinPodPilot

Well-Known Member
Actually, you were given the link to the system thread... but it would appear you either can't read or are in some way incapable of following a link. But, cince Stink's been so generous and forgiving... here it is again... try to stay focused long enough this time to follow it...

StinkBud Aeroponic System <---this is the part you click on :bigjoint:

You can also find detailed instructions in the June issue of High Times. The reason you won't find his systems for sale anywhere is because he provides all the information anyone could need , free of charge, to build a system. They can cost all of maybe $100(generous estimate) to build and take about 2-3 hours to complete by someone with minimal hand/power tool experience. Some strains can handle extremely high ppm because of the hybrid of aeroponics and nutrient film technique. Now, if you still can't get it... I'm truly sorry for you.


Talisman said:
Knew you were just giving out false information. No system supports a plant in 3500 PPM. You say thread, WHERE! hahaha. I have read them all bye t he way big mouth and never has anyone including stink advocated over 1700 ppm. You are just telling bs and that is why I am irrate about the info you post because people that don't know might actually do what your dumb ass tells them and they will kill there plants. So fuck off, I mean that in a nice way of course, and either put up or admit you are just a junkie little boy making up total TOTAL BS!!!!! 3500 PPM will KILL YOUR PLANTS people do not pay this thead any attention. Worthless people post worthless dangerous info and then as in this case don't back up their statements with anything but it is written somewhere out there so go look. LOLOL. right!!! Have read everything about PPM and once again never ever never ever has anyone ever, did you get that, NEVEREVER said go anywhere near that ppm level. Think people get it now that you are full of it.... Stay off the site or learn more before you post this nonsense... Or for the last time, PROVE IT with sources, links, where to find, this suppossed stink thread that says what magic system uses 3500 ppm..... OK enough said. Idiot :roll:
Click to expand...
 
T

Talisman

New Member
Like I said a just a different and well known type of soiless hydro nft system. They are well known. No strain takes 3500 PPM Period and no one on here but you ever has spoken even stink about going that high. You don't do it and you have not done it. you make shit up so shut up moron. Find anywhere where someone including stink says 3500 ppm is the level and tell us all where that statement is written!!!! You make it up and think you can say it is not your own stupid idea but it is not anywhere but on you stupid thread here. So big mouth tell us, quote a souce and link THAT source with that info in it. Now lets see what you have to say.... Can't wait. Bet you don't say anything.... I know you won't show us where 3500 ppm is reccommended.... LOLOL. I look forward to what you say next.....!!!!!!:lol::dunce:
TokinPodPilot said:
Actually, you were given the link to the system thread... but it would appear you either can't read or are in some way incapable of following a link. But, cince Stink's been so generous and forgiving... here it is again... try to stay focused long enough this time to follow it...

StinkBud Aeroponic System <---this is the part you click on :bigjoint:

You can also find detailed instructions in the June issue of High Times. The reason you won't find his systems for sale anywhere is because he provides all the information anyone could need , free of charge, to build a system. They can cost all of maybe $100(generous estimate) to build and take about 2-3 hours to complete by someone with minimal hand/power tool experience. Some strains can handle extremely high ppm because of the hybrid of aeroponics and nutrient film technique. Now, if you still can't get it... I'm truly sorry for you.
Click to expand...
 
T

Talisman

New Member
Found this from Stinkbud, I have to say he must be an idiot. No strain starts out at 2000 ppm in veg and no system or strain will live in 3500 ppm not his or anyones elses. So fuck off you stupid idiot. I have read everything and this is the dumbest thing anyone could ever do. Besides it killing your plants for sure, it would not be more benificial at those levels. the plants can't and don't would never need that much nutes. So good luck with your dead magic strain of cannabis no one has ever heard of. 3500 ppm is 3500 ppm in any system.... :sleep::roll:
Talisman said:
Like I said a just a different and well known type of soiless hydro nft system. They are well known. No strain takes 3500 PPM Period and no one on here but you ever has spoken even stink about going that high. You don't do it and you have not done it. you make shit up so shut up moron. Find anywhere where someone including stink says 3500 ppm is the level and tell us all where that statement is written!!!! You make it up and think you can say it is not your own stupid idea but it is not anywhere but on you stupid thread here. So big mouth tell us, quote a souce and link THAT source with that info in it. Now lets see what you have to say.... Can't wait. Bet you don't say anything.... I know you won't show us where 3500 ppm is reccommended.... LOLOL. I look forward to what you say next.....!!!!!!:lol::dunce:
Click to expand...
 
You must log in or register to reply here.
Top