STRAINLY

Northeastbudz

Well-Known Member
That stuff is stupid expensive. $24 for 10ml not including shipping :wall: That is robbery.

get the stuff from Buildasoil and mix it into a 7.8% solution or stronger yourself‼ I can make 8.5 GALLONS of 7.8% solution for $22…. It Even tells you how much to weigh out to make the solution yourself. Just sayin… why get ripped off❓

Also here’s a $5 off code so that makes it $16‼

Here's a $5 off coupon for your first order at BuildASoil. To accept, use my referral link:
http://i.refs.cc/7EDQ0skT?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjo2Nzg2MzI3MTV9
thanks man
 

Dividedsky

Well-Known Member
That stuff is stupid expensive. $24 for 10ml not including shipping :wall: That is robbery.

get the stuff from Buildasoil and mix it into a 7.8% solution or stronger yourself‼ I can make 8.5 GALLONS of 7.8% solution for $22…. It Even tells you how much to weigh out to make the solution yourself. Just sayin… why get ripped off❓

Also here’s a $5 off code so that makes it $16‼

Here's a $5 off coupon for your first order at BuildASoil. To accept, use my referral link:
http://i.refs.cc/7EDQ0skT?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjo2Nzg2MzI3MTV9
[/QUOTE]
Dyna gro protekt is definitely your best bang for your buck. Its super concentrated and strong, I usually only ever use 3 to maybe 5 mls per a gal. I'm sure both of which mentioned are great products but protekt is super easy to get and available at pretty much every local hydro store. The first one mentioned is a complete rip off for 10mls! You shouldn't be paying a lot for silca.
 

R.Raider

Well-Known Member
His antics are catching up with him and busy or not he seems like he's chewed more than he might be willing to put in a work week.

I'll be the first one to say that it's not looking good for his reviews here as it adds up. Looking at the cuts posted and the others I've been watching it's like a wild show and you just might be getting neglected clones as it's being noted that quality has been poor too due to negligence on his end.

I waited for about ten days for the cereal milk a while ago and it was a little bit starved & had been feasted on by the thrips. It was clean though unlike the shipments my buddy received recently infested with thrip pupae. These were really sick in comparison with the Cereal Milk I recieved. Couldn't pay me to take in a cut of his again- no way, not happening here and I thought he was okay initially even though I had to pay more than just $50 considering the time in nursing things back to health
My experience with him(Shinobi) was pretty similar. Took a couple weeks to ship out my first order. His communication is beyond terrible as well.

My first order showed up short a plant. My second order showed up with 2 out of the 3 on the verge of death and did die. Also all 3 had massive signs of a previous thrip infestation. Thrip damage, dead thrips and eggs.

He seems to have some really good genetics and very reasonable prices but he badly needs to improve his customer service skills and stop sending out questionable plants.
 

Diesel0889

Well-Known Member
This^^^ he said he would reship Monday and he did. I received 2 cuts I never ordered and none of the other 5 that showed up with thrips damage and barley living (bad heat stress and over watered in a big way. I'm not talking shit on the guy but for me there is many I'd rather order from at this point. Ill pay more for clean legit cuts. The genetics may be good but having to quarantine along with massive rehab I don't need. I'm just going to take the $320 loss as I guess he don't want to reship what I paid for. 7 healthy clones... again make your own decisions, this is only my experience over the last 4 weeks or so....

Having said that I wish dookie farms had a bigger menu, he did deliver 5 cuts that are growing unlike the others.. I hope within a few weeks shinobi_cuts will grow enough so I can reclone and throw the rest away. Damn shame... I promise there was NO GROWER ERROR! JUST MEH CUTS... along with thrips!
 

Sqwee

Well-Known Member
I talked with canna clones yesterday are you sure your txting the right #❓
I'm not txting a # or know of one. I'm requesting cuts through Strainly listings which starts a conversation in my account inbox.

That list you posted also doesn't match what I see on his Strainly page, I don't see any Ice Cream Cake, London Fritter or Zookies.... am I looking at the wrong account or requesting cuts wrong?
 

PJ Diaz

Well-Known Member


That stuff is stupid expensive. $24 for 10ml not including shipping :wall: That is robbery.

get the stuff from Buildasoil and mix it into a 7.8% solution or stronger yourself‼ I can make 8.5 GALLONS of 7.8% solution for $22…. It Even tells you how much to weigh out to make the solution yourself. Just sayin… why get ripped off❓

Also here’s a $5 off code so that makes it $16‼

Here's a $5 off coupon for your first order at BuildASoil. To accept, use my referral link:
http://i.refs.cc/7EDQ0skT?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjo2Nzg2MzI3MTV9
thanks man
Dyna gro protekt is definitely your best bang for your buck. Its super concentrated and strong, I usually only ever use 3 to maybe 5 mls per a gal. I'm sure both of which mentioned are great products but protekt is super easy to get and available at pretty much every local hydro store. The first one mentioned is a complete rip off for 10mls! You shouldn't be paying a lot for silca.
I bought the 100ml bottle for $50, so not that expensive really as long as you don't buy the tiny bottle. Like I said it's only 1.4 ml per 10 gallons, so it works out to cost around 7 cents a gallon diluted, which is maybe a penny per gallon more expensive than Pro-Tekt.

I've used the cheaper potassium silicates for a while, and they do have benefits, however I have also read extensive studies which show that mono-silicic acids have additional benefits which silicates do not, so comparing silicates with mono-silicic acid is really like comparing apples to oranges.

Here are a couple of good articles on the issue:
 

Dreminen169

Well-Known Member
I'm not txting a # or know of one. I'm requesting cuts through Strainly listings which starts a conversation in my account inbox.

That list you posted also doesn't match what I see on his Strainly page, I don't see any Ice Cream Cake, London Fritter or Zookies.... am I looking at the wrong account or requesting cuts wrong?
Yea, he responds best by txt. If not I would message him on IG or Twitter, but he’ll just tell you to txt anyway…
If not, I just saw that King Kong clones has some kush mints (rabbid hippie) in stock
That txt came directly from him on Wednesday. So maybe that’s the updated list. Dunno
 

Auntie Janes Nursery

Well-Known Member
Is there anyway to post docx documents in the forums. Trying to post our test results because apparently someone wants to accuse us of giving out HPLvD and me saying we have test results that clearly state negative is not good enough.

Nevermind, here is a screenshot. This is an older test we ran so most of the strains we tested out are not in our garden anymore. If you follow the acronyms there is Apple Fritter (AF) Sundae Driver 19 (SD19), Sundae Driver (SD) (blacksheep farm cut), Cherry Pie (CP), Runtz (Ru).... Have plenty more of these documents with just about all of our strains that have been on the menu since about January. I hate to hear someone not happy but it is hard to argue when we have this right in front of us.
 

Attachments

Last edited:

Auntie Janes Nursery

Well-Known Member
Just a word of advice to vendors on Strainly. Go get all of your cuts tested. It is not just for assurance to everyone else that you are providing clean cuts but also assurance for yourself when someone tries to accuse you of it. I mean this one was mad I wouldn't "help him out" although all I was doing was explaining how we do testing so regularly and on all the cuts he had so it would highly unlikely come out of our garden. In my mind I helped him out by showing him test that it didn't come out of our garden. In his mind it seemed like helping him out was refilling his garden or something. That is consumerism though. Usually have some of the best people we work with but there are always those that want to pass the buck. So again protect yourself and others at the same time. It is a great investment. Even with multiple strains. We have 16 so we are about to drop $400 on testing. We added $5 to our cut prices so every 80 cuts sold basically pays for it each month and we sell way more than 80 cuts.
Just some friendly advice :peace:
 

Sqwee

Well-Known Member
Yea, he responds best by txt. If not I would message him on IG or Twitter, but he’ll just tell you to txt anyway…
If not, I just saw that King Kong clones has some kush mints (rabbid hippie) in stock
That txt came directly from him on Wednesday. So maybe that’s the updated list. Dunno
Thanks for the info, I'm not going to chase his ass around though. He is listing them on Strainly, not responding on Strainly and has no mention of how to contact him elsewhere. Just more shitty business practice and customer service from someone asking crazy prices for cuts.

If he's going to list on Strainly, he should be replying to people there.
 

Auntie Janes Nursery

Well-Known Member
Thanks for the info, I'm not going to chase his ass around though. He is listing them on Strainly, not responding on Strainly and has no mention of how to contact him elsewhere. Just more shitty business practice and customer service from someone asking crazy prices for cuts.

If he's going to list on Strainly, he should be replying to people there.
I can't speak for everyone on strainly but I will say that it is not the easiest to keep up with if it is a side gig. I am a CPA (certified pain in the ass) in my other more boring professional career and you think people on Strainly can be aggressive lol. They can't hold a candle to some of the execs I have to deal with on audits. It consumes a lot of my time so I have had to find a balance and the main balance I have been able to find is to answer as often as I can but also make it a point that anyone who I have a deal in place with goes through in a timely manner and will be followed through on. It limits my ability to get everyone but until I am able to switch over to my passion of growing on a full time professional level I will have to keep finding the balance. The one thing I will assure though is if there is a deal in place and you trusted me enough to give me money, I will make sure you get your stuff asap. That is also why I do not like to do pre orders. I like to have whatever is moving rooted and try to have quick turnovers from payment to ship. Again limits my ability but hopefully people can understand what some of us vendors have outside of Strainly.
 

Sqwee

Well-Known Member
I can't speak for everyone on strainly but I will say that it is not the easiest to keep up with if it is a side gig. I am a CPA (certified pain in the ass) in my other more boring professional career and you think people on Strainly can be aggressive lol. They can't hold a candle to some of the execs I have to deal with on audits. It consumes a lot of my time so I have had to find a balance and the main balance I have been able to find is to answer as often as I can but also make it a point that anyone who I have a deal in place with goes through in a timely manner and will be followed through on. It limits my ability to get everyone but until I am able to switch over to my passion of growing on a full time professional level I will have to keep finding the balance. The one thing I will assure though is if there is a deal in place and you trusted me enough to give me money, I will make sure you get your stuff asap. That is also why I do not like to do pre orders. I like to have whatever is moving rooted and try to have quick turnovers from payment to ship. Again limits my ability but hopefully people can understand what some of us vendors have outside of Strainly.
I'm sure its not but I've also been extremely patient, I sent a request once and it was ignored until it auto canceled and then a second one that is also being ignored. On a cut that he apparently doesn't even have but has left listed for over a month.

He's not too busy to respond to Dreminen169 about clones outside Strainly and if I was a potential customer that wasn't aware of this thread I'd still be left in the dark that you need to contact him through social media.

If I was asking and getting $500-1k per cut of some hyped up polyhyrid it damn sure wouldn't be my side gig, I'd quit my job.
 

R.Raider

Well-Known Member
Is there anyway to post docx documents in the forums. Trying to post our test results because apparently someone wants to accuse us of giving out HPLvD and me saying we have test results that clearly state negative is not good enough.
Just curious to know, can HPLvD be cured? Or once you have it do you have to toss all your plants type thing?
 
Top