Temperature, humidity, MOLD problem...

ErikBL

Well-Known Member
Hello. Yesterday try to got some information here but no news.

So my problem was, that I think I have MOLD... Is it?

210920121562.jpg210920121563.jpg

Yesterday I bought dehumidifier, which helps me a little. I have humidity with out it ~70-75%, but today my humidity is 64%... I'm in flowering 3th week.

But I went to my grow room at night when is my dark cycle, and found out that humidity when everything OFF is 88% o_O and temperature geting lower and lower about 15C (at day cycle it is 22C) ... So I put in heater and run all night circulation fan. Humidity decrease to 65% and temperature was 24C... Today humidity is 64% and temperature 25C...

And as I read i think I over water them, so that cause MOLD in my opinion. Last time I water them was 5 days ago, soil is still moist...

So my questions is:

1) Is it mold? I cut all MOLD leaves and try to get warmer, more ventilation and dehumidifier... Will it help?
2) Is it ok if my temperature at night is only 1C lower than at day cycle?
3)Will it help me prevent any other MOLD if I correct all needs for it?
4) Would I need to remove sick plants from grow room, or just cut leaves?
 
i see no mould, just leaves that are dying which could be from a number of things, possibly:

NuTRiEnT DEFiCienCy
over fertilization (UNLIKELY)
not getting much light so pointless being there.
came into contact with soil/feed and got burned


numerous reasons really, i wouldn't worry about the lower leaves too much, it's the tops you wan't to kep nice and healthy.

p.s forgive caps/ spelling my keyboard is gone kaput
 
i see no mould, just leaves that are dying which could be from a number of things, possibly:

NuTRiEnT DEFiCienCy
over fertilization (UNLIKELY)
not getting much light so pointless being there.
came into contact with soil/feed and got burned


numerous reasons really, i wouldn't worry about the lower leaves too much, it's the tops you wan't to kep nice and healthy.

p.s forgive caps/ spelling my keyboard is gone kaput

But some flowers getting brown too! There is picture! 210920121566.jpg
 
it looks like to me the damage is older growth, indicating them damage was done a few weeks back, seen as its not a deff/lock out ect, have you be any chance had high temps issues a few weeks ago, and did the leafs/plant dry out for a very short time,,can u take a pic of the whole plant
 
I'm not sure it's mold either, here's bud with mold.
 

Attachments

  • Bud Rot!!! (2).jpg
    Bud Rot!!! (2).jpg
    54.6 KB · Views: 32
  • Bud Rot!!! (1).jpg
    Bud Rot!!! (1).jpg
    49.5 KB · Views: 30
Yeah, it sucks alright! I'm usually pretty good at spraying at just the right time, guess I was slacking a bit here. :(
Didn't loose much to it though...
 
Hello. Yesterday try to got some information here but no news.

So my problem was, that I think I have MOLD... Is it?

View attachment 2344595View attachment 2344596

Yesterday I bought dehumidifier, which helps me a little. I have humidity with out it ~70-75%, but today my humidity is 64%... I'm in flowering 3th week.

But I went to my grow room at night when is my dark cycle, and found out that humidity when everything OFF is 88% o_O and temperature geting lower and lower about 15C (at day cycle it is 22C) ... So I put in heater and run all night circulation fan. Humidity decrease to 65% and temperature was 24C... Today humidity is 64% and temperature 25C...

And as I read i think I over water them, so that cause MOLD in my opinion. Last time I water them was 5 days ago, soil is still moist...

So my questions is:

1) Is it mold? I cut all MOLD leaves and try to get warmer, more ventilation and dehumidifier... Will it help?
2) Is it ok if my temperature at night is only 1C lower than at day cycle?
3)Will it help me prevent any other MOLD if I correct all needs for it?
4) Would I need to remove sick plants from grow room, or just cut leaves?

Looks like wind burn?? Where are your fans positioned? Your temp can stay the same 24-7 but you should not dip by more than 10 degrees. Youe floewr room should be really low in humidity. I run 2 de-humidifiers at night and one during the light cycle.

My humidity never gets higher than 40% and has been as low as 15% in the winter months. If you keep your humidity under 50%ish(depending where you live) molds and fungus can't live. So that is how you keep mold out but I do not think you got mold. If you look at your second pic you will see little balck spots on the tip...concern yourself there...in that pic it looks like thripe shit on the leaf.

Good luck
 
Looks like wind burn?? Where are your fans positioned? Your temp can stay the same 24-7 but you should not dip by more than 10 degrees. Youe floewr room should be really low in humidity. I run 2 de-humidifiers at night and one during the light cycle.

My humidity never gets higher than 40% and has been as low as 15% in the winter months. If you keep your humidity under 50%ish(depending where you live) molds and fungus can't live. So that is how you keep mold out but I do not think you got mold. If you look at your second pic you will see little balck spots on the tip...concern yourself there...in that pic it looks like thripe shit on the leaf.

Good luck

Yes, keeping the humidity low help you with fungus and molds. But, what about plant growth? Ive never try below %55, Also, read that 55-60 is best for flowering.
so what is your experience about growth rate and humidity? Is it better to keep it %55 or %40?
I do not think it is possible for me to keep it %15, but could you please explain, if you realize any changes when humidity drop that level?
 
My humidity is 60%, I can't get it lower, maybe if I put second dehumidifire... My grow room is in basement ant it is very wet down there, so humidity is a problem... And weather last days is rainy so any way still moisture everywhere...

Will try to check out further days what will happen, hope everything will be better... :(
 
Back
Top