Timber grow lights?

licoricetree · Jan 23, 2017

2x4 closet with a 32" bar 4 cxb3590 on a 1750ma mean well maxed out and door cracked im at 75-78 degrees and 50-55% humidity in 5gal bubble buckets. Outside room though is a steady 62 degrees

Budsie · Jan 23, 2017

licoricetree said:
2x4 closet with a 32" bar 4 cxb3590 on a 1750ma mean well maxed out and door cracked im at 75-78 degrees and 50-55% humidity in 5gal bubble buckets. Outside room though is a steady 62 degrees

That's nice, I like how you can place them how you want

licoricetree · Jan 23, 2017

Can put them to tight i would say lowest maybe 9in from cob to cob

Squatch69 · Jan 24, 2017

BM9AGS said:
Nice. You live in SD. I gotta house hunt there

Which member lives in SD? I do too... Lol. We might know each other.

BM9AGS · Jan 24, 2017

Squatch69 said:
Which member lives in SD? I do too... Lol. We might know each other.

No clue. But I gotta house hunt in SD and LA.

Squatch69 · Jan 24, 2017

SD is beautiful out in the Blac Hills area. East of the Missouri river is quite flat and kinda boring. Lol

DogiTwch · Jan 24, 2017

If you tell me where you live i promise not to tell more then 6 people ok. I do not share well..

Hey BM9AGS

Shout to all members too.

I gonna smoke me some legal stuff and get more higher then before.

Go Timber Go

I have to wait a few weeks before i can buy.

Budsie · Jan 24, 2017

DogiTwch said:
If you tell me where you live i promise not to tell more then 6 people ok. I do not share well..

Hey BM9AGS

Shout to all members too.

I gonna smoke me some legal stuff and get more higher then before.

Go Timber Go

I have to wait a few weeks before i can buy.

Them timbers look so sweet, I gotta wait a few weeks also lol but I can't start my first grow until April :wall:

Budsie · Jan 24, 2017

What do you guys think about the canopy 10 layout for the 4x4 tent? I watched a few videos on that build today. It looks like it would give really good uniformity to the area

Budsie · Jan 27, 2017

I've been hawking growmau5 video on the canopy 10.
I bought the L channel and I bought linen wire rack shelving lol. My plan is to make something like DudebeDoobie. I'm going to make a 40"x40" square and lay the rack system in the channel.
What do you guys think about this layout? 10 cobs 3500k for full cycle 500 total watts.

OXXOXXO
XXOXOXX
XXOXOXX
OXXOXXO

Do you guys have any ideas if there would be a good even coverage?

Nenno44 · Jan 27, 2017

If you wanted to do them like that i think 12 would be better likes this
0xx0xx0
xx0x0xx
0xxxxx0
xx0x0xx
0xx0xx0

I did 10 like this with even coverage
x0x0x0
0x0x0x0
x0x0x0

Budsie · Jan 27, 2017

Nenno44 said:
If you wanted to do them like that i think 12 would be better likes this
0xx0xx0
xx0x0xx
0xxxxx0
xx0x0xx
0xx0xx0

I did 10 like this with even coverage
x0x0x0
0x0x0x0
x0x0x0

You put the 12 like that in a 4X4 tent?

Nenno44 · Jan 27, 2017

well i now have 16 set up like this
xx0xx0xx0
x0xx0xx0x
0xx0xx0xx0
x0xx0xx0x
xx0xx0xx0

EDIT: Yes i use a 4x4

Budsie · Jan 27, 2017

Nenno44 said:
well i now have 16 set up like this
xx0xx0xx0
x0xx0xx0x
0xx0xx0xx0
x0xx0xx0x
xx0xx0xx0

EDIT: Yes i use a 4x4

Wow....... I don't want to go over board with the lights lol. The most my tent will see is 4 plants but most likely will be 2 at the most

Nenno44 · Jan 27, 2017

i only run 4 and the 16cobs only run at 550w

Nenno44 · Jan 27, 2017

it was expensive, but i did buy cree. If I could do it over again i would buy vero or citi

Budsie · Jan 27, 2017

Nenno44 said:
it was expensive, but i did buy cree. If I could do it over again i would buy vero or citi

Any reason? I was thinking crees

_Mango_ · Jan 27, 2017

Had this about a week:
http://timbergrowlights.com/225-watt-cree-cxb3590-linear-framework/
Been happy with it so far. Put it on a kill a watt yesterday and it was drawing 215 watts which is close enough to what it should be unlike the g8led 240 watt it replaced that was drawing 155 watts lol.
Great customer service too.

Budsie · Jan 27, 2017

Nenno44 said:
If you wanted to do them like that i think 12 would be better likes this
0xx0xx0
xx0x0xx
0xxxxx0
xx0x0xx
0xx0xx0

I did 10 like this with even coverage
x0x0x0
0x0x0x0
x0x0x0

What kind of spacing did you use for that 10 layout? What was the dimensions? If you don't mind me asking :bigjoint:

Budsie · Jan 27, 2017

I'm just looking for a nice even coverage that does the job lol

Timber grow lights?

Well-Known Member

Attachments

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Member

Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

Member

Member

Member

Similar threads