Ultimate DIY Carbon Scruber Under $100 Fan and All

What else needs to be explained???

Stand alone scrubber with pics and directions.
Even comes with a material list.

Tell me where you need help 181, all kiddin aside.
This thing works like a champ.
 
What else needs to be explained???

Stand alone scrubber with pics and directions.
Even comes with a material list.

Tell me where you need help 181, all kiddin aside.
This thing works like a champ.

I think he might have meant the actual metal mesh filter that holds the carbon maybe
 
Ohh dazed and confused. My bad
my eyes are half open right now.

181 if you look in the air conditioning section of a home improvement store they sell a metal mesh like screen used for filters that go in your furnace.

You can interchange that with a fine mesh like screen like bra washing bags. You can be creative.
You just dont want the fan to pull all the carbon dust through.
Just air.
Again my bad.:oops:
~~Joe~~
 
Ohh dazed and confused. My bad
my eyes are half open right now.

181 if you look in the air conditioning section of a home improvement store they sell a metal mesh like screen used for filters that go in your furnace.

You can interchange that with a fine mesh like screen like bra washing bags. You can be creative.
You just dont want the fan to pull all the carbon dust through.
Just air.
Again my bad.:oops:
~~Joe~~

k thanks joe that cleared it up. I was just a little unclear of how the carbon stayed in the mesh screen...
 
k thanks joe that cleared it up. I was just a little unclear of how the carbon stayed in the mesh screen...

He made a bag with two pieces of screen and taped three sides .. leaving one side open .. then poured the carbon in .. then taped the fourth side ..... [I think .... ]
 
So would this also work well to attache to my light as an exhaust? or would i need something more powerfull. 400w hps/mh and the grow area is going to be about 2x4x5.
 
I think you would have to modify it to fit a inline fan for you light.
The set as it stands will not pull enough cfms.
This is more as a stand alone system for a small area.

2x4x5 envelope is adequate.
~~Joe~~
 
awesome man im bout to start 4 stinky ass strains for my next gro and im verry low on funds this helped so much. + rep to you camel
 
awesome man im bout to start 4 stinky ass strains for my next gro and im verry low on funds this helped so much. + rep to you camel

Good luck to ya Bro :-)

Ive noticed since their isnt a lot of carbon with the current specs, you have to add another box to the filter to work efficiently.
~~Joe~~
 
they really arent the cfm they r advertised at that is the boosted cfm that 6 inch fan is mabye 70 cfm by its self just somethin to consider cause i had a 6"carbon filter fan combo delivered to my door for 203$ that is a true 435cfm fan and a can filter 33 with pre filter and i can still smell them a bit and the room is 3x4x7 with 10 flowering filter runs 15 on 30 off just somethin to consider


i have one of those fans exhausting my little veg room (24"x34"x46" with a 250 mh) and it dosent work to well thats with an assisted 4"fan blowing in temps still get a lil crazy before i can open door
 

Attachments

  • filter.jpg
    filter.jpg
    21.3 KB · Views: 81
Back
Top