Ventilation question??

onefortheroad

Active Member
Ok, setting up for indoor in the soon future and was wondering how many cfm i need to move to have control of this room? its 838cubic feet. i wlll be running a 600 to 1000w hps. my intake will be coming from the floor and exhaust into celing. I was thinking every 5 min replace the air so 180 cfm should be ok? the smallest i think i'll go is 270cfm. How am i doing fellas?
 

Green Cross

Well-Known Member
Ok, setting up for indoor in the soon future and was wondering how many cfm i need to move to have control of this room? its 838cubic feet. i wlll be running a 600 to 1000w hps. my intake will be coming from the floor and exhaust into celing. I was thinking every 5 min replace the air so 180 cfm should be ok? the smallest i think i'll go is 270cfm. How am i doing fellas?
Here's a CFM calculator

they recommend an exchange rate of every 1 - 5 minutes, so to be on the safe side let's go with 2 minutes = 419CFM

The Soler & Palau TD-200x pulls 419 on the low setting. perfect
 

Straight up G

New Member
Erm I am confused the CFM converter says I need to do 2.4 every 5 mins in a 2x4 closet my timer does 15 min intervals at lowest ? I have 2x 6" fans for exhaust how do I know wat is right?
 

onefortheroad

Active Member
never used one i know they use em out of computers though. which should be set up for 110 a wall socket. look up computer fans and see what you come up with .
 

Straight up G

New Member
Cool I will look into it thanks4 the advice, y dyu reckon no1 has replied to my thread Iv had like 80 views and no replies dyu think ive done something wrong I was just trying to apologise for thread jacking before I asked for advice??
 

onefortheroad

Active Member
STRAIGHT G an old phone charger or something to that effect will work. PC fans are 12V DC so just look on whatever you are going to use and it will tell you the output power. Black is ground, red or yellow is hot. although it should work either way you wire it. or if you go to radio shack and get a 12 volt adapter all you do is plug it into the wall and put the wires into the little holes it has. youll see when you get it in your hand. they are cool because you can switch it to 3 volt 5 volt or 12 volt for 3 speeds. let me know what you do and how it works.
 
Top