what is this

gk skunky

Well-Known Member
Looks like a phosphorus deficiency. Could be a lock out issue. Not sure what method of growing your doing but if soil/soiless hand watered, flush the media then feed. If Hydro check your TDS/EC/PPM and see what that and your pH is.
 

tenthirty

Well-Known Member
Nutes need to be in balance. Less is more.....
It's a reset of feeding.

I would feed with just water for a week or two.
 

wood780

Well-Known Member
Ya I never really flyshed before with organics . I noticed my 5 gal pots take forever to dry up too so ive been watering very little
 

hyroot

Well-Known Member
Ya I never really flyshed before with organics . I noticed my 5 gal pots take forever to dry up too so ive been watering very little

General organics is not organic. Still salt based. They lie. There's chems and heavy metals in those bottles.
 

gk skunky

Well-Known Member
And definitely a deficiency as Hyroot and I both initially suspected. The flush I recommended, as tenthirty explained is to essentially start from a clean slate. You then know what's there because of what you added. Plants do not assimilate nutrients all at the the same levels and so overtime you can get salt buildups that will re-suspend in solution upon watering and throw concentrations off causing other nutrient problems even if pH is good. Looking at the pictures it appears you need to bump up your feeding all around. I'd increase buy 25%. So if you use 8ml/gal 25% increase would put you at 10ml/gal, 8*1.25=10 or (8*.25)+8=10. See how that does. If a little burn, back it off to ~12% so again if using 8ml/gal go to 9ml, (8*.12)+8=8.96. If 25% seems fine and they still have that pale appearance go up a little more and find what they like. Some plants are heavy feeders while others are not, just as some are more finicky than others.
 

wood780

Well-Known Member
Thanks guys ya I havent been feeding to muxh mainly because my pots wont dry out for me im used feeding under 1000w in a 4x4 still trying to figure out how to water/feed with led
 

wood780

Well-Known Member
Is it possible for the light to be causing this . I noticed one side of the second plant was getting the same look a little but they are under seperate lights and I switched the plants around and now the second ones starting to show similar symptoms . Cause ones under a hans and the other is under the panel using illumitex leds
 
Top