ChrisDuke
Well-Known Member
Cheap DIY carbon scrubber.
My room is "sealed" but is built on a slab in the garage, so I have some leakage. This is what I came up with on the fly...
Cheap box fan.
Wire screen, small enough mesh to hold the carbon.
Take the back screen off of the fan, lay it over the screen and use a marker to trace it out.
I used tin snips to then trim the mesh, and went a bit outside of the line to give myself some extra play room.
Next simply put the mesh back under the plastic grid of the fan, and reassemble.
Then I did a quick mount in the corner of the room, with the fan blowing down and added the carbon.
I only bought one small container of carbon, and initially was (and still will) going to cover the entire fan, but ran out.
After about ten minutes of having the room shut tight, there is no odor in the garage, and it passed the wife's sniff test!
Actually the room is now way less skunky, so I'm calling this a success, of course between grows I'll hang it better and clean up the look a bit, probably add a prefilter as well.
Just thought I'd share!
Sent from the Rollitup App
My room is "sealed" but is built on a slab in the garage, so I have some leakage. This is what I came up with on the fly...
Cheap box fan.
Wire screen, small enough mesh to hold the carbon.
Take the back screen off of the fan, lay it over the screen and use a marker to trace it out.
I used tin snips to then trim the mesh, and went a bit outside of the line to give myself some extra play room.
Next simply put the mesh back under the plastic grid of the fan, and reassemble.
Then I did a quick mount in the corner of the room, with the fan blowing down and added the carbon.
I only bought one small container of carbon, and initially was (and still will) going to cover the entire fan, but ran out.
After about ten minutes of having the room shut tight, there is no odor in the garage, and it passed the wife's sniff test!
Actually the room is now way less skunky, so I'm calling this a success, of course between grows I'll hang it better and clean up the look a bit, probably add a prefilter as well.
Just thought I'd share!
Sent from the Rollitup App