Alright fellas as requested here are better pictures, but my right arm is in a sling from shoulder surgery a few days ago and it hurts too much to bend over so I didn't clean it up.. But I will be able to eat on it before I grow in there. Shoulder will feel better in a few days.
I'm the kind of guy who likes to do something once and do it the right way. I have 0 hands on experience in the art of growing, but instead of posting questions left and right I will study my butt thru your failures and victories to give this my best shot. That being said, sorry if this is a little bit of a read but I want you to be able to picture this. I am out of work till March with a seperated shoulder so this is the perfect time to start growing.
Background on this space, this is a closet in my finished basement which I recently moved into from a bedroom upstairs, this is a corner closet, the inside of the closet is unfinished. Half of my basement is finished, the other half is a laundry room that holds furnace, washer, dryer etc, and is divided with a wall.
Now I have not ruled out the idea of cutting and re brazing this meter to the corner of this closet but honestly that is a last ditch effort. This is all based off growing 1 plant just to get an idea of build,more plants and I will change supplies as needed. I am leaning towards growing, big bud feminized, or something like that.
MY SET UP PLANS
Closet dimensions- 7' high, 16" deep, 29" wide, the meter sticks out 8 1/2" and is about 10" long
The back wall of the closet is a concrete wall so I believe I'm going to use some sort of sheeted insulation to make my box more easily temperature controlled. My plans are to build a box that will take up most space in the closet, but leave 2' or so at the top so I can have adequate room to have a DIY carbon scrubber and such. Now if I leave the meter there then i will just build the box around it, besides being a nuisance cause the whole backside of the box won't be flush with the wall,do you think I will run into any problems? If I build around it part of the backside of my wall will come out 9", be about 10" wide, then go back again. I was thinking because all 4 walls are not the same maybe this could cause heat build up or something where I have to build around the meter. The inside of my box will be painted flat white.
LIGHTING AND VENTILATION
Lighting will change between veg and flower but will generally consist of 8 cfl bulbs. I was thinking 8 23watt 6500k for veg, not sure about flower yet. I am starting to create a design of where I want my lights, I will share it with y'all when it's completed. For ventilation I will have some pc fans moving air around the box, intake I haven't really thought of yet, and exhaust will be 4" with a DIY scrubber, it be okay after scrubbing exhaust to just it into my wall? Lol. This is a basement so there no attic above me and closest window is 20' away but it's in the middle of room so... This house was built in 1960, it is a 2 story single family house, BALLOON FRAME
, meaning there is a void space between the walls from the basement on up to the attic, so if I went into the wall in theory the scrubbed exhaust should rise up into the attic, where there are automatic exhaust fans installed.
So my questions are.. What do you think? Please don't hold back, I will use every piece of criticism to help make this better!! Will it be ok exhausting into the wall? Heat build up because of uneven walls from framing around the meter? Thanks fellas I really appreciate it!! Plan to start building ASAP !!