LED Companies w/ LINKS

FranJan

FranJan

Well-Known Member
stardustsailor said:
[QUOTE="Positivity, post: 10508609, member: 541027"]2' x 3.5' aluminum plate..plus probably pretty thick to set everything in the plate. 400w? I bet it gets pretty hot..
Nice design..although the lumen output is a little low at 34000 lumens
bongsmilie
Click to expand...
I can't say I'm 100% positive but the installation instructions are in inches, my Surexis are in inches, and they're from Texas, trust me they're using inches :). They probably only use the Celsius rating instead of Fahrenheit for marketing purposes. BTW I'm a believer they're really underspec'd just to sell more and the "you have to mount them x amount of inches away" is mostly BS, though if you're really trying to use the Scientific Method it's there if you follow their spec. So they're not completely greedy in my book :). At least the tech is there! Oh and from my experience with Illumis, they run pretty cool and that's their light extraction tech at work I bet. They just don't need to be run that hard to produce results I assume.

Edit- Bingo! Found it in the industrial brochure. Inches SDS.

And I forgot about this one. Another design I like.
upload_2014-5-17_0-12-10.png
 
Dr.D81

Dr.D81

Well-Known Member
FranJan said:
I can't say I'm 100% positive but the installation instructions are in inches, my Surexis are in inches, and they're from Texas, trust me they're using inches :). They probably only use the Celsius rating instead of Fahrenheit for marketing purposes. BTW I'm a believer they're really underspec'd just to sell more and the "you have to mount them x amount of inches away" is mostly BS, though if you're really trying to use the Scientific Method it's there if you follow their spec. So they're not completely greedy in my book :). At least the tech is there! Oh and from my experience with Illumis, they run pretty cool and that's their light extraction tech at work I bet. They just don't need to be run that hard to produce results I assume.

Edit- Bingo! Found it in the industrial brochure. Inches SDS.

And I forgot about this one. Another design I like.
View attachment 3154761
Click to expand...
i looked it up i would give the 28 at 5700 a go for my veg .where can i buy one i found the company's page but no venders
 
stardustsailor

stardustsailor

Well-Known Member
FranJan said:
I can't say I'm 100% positive but the installation instructions are in inches, my Surexis are in inches, and they're from Texas, trust me they're using inches :). They probably only use the Celsius rating instead of Fahrenheit for marketing purposes. BTW I'm a believer they're really underspec'd just to sell more and the "you have to mount them x amount of inches away" is mostly BS, though if you're really trying to use the Scientific Method it's there if you follow their spec. So they're not completely greedy in my book :). At least the tech is there! Oh and from my experience with Illumis, they run pretty cool and that's their light extraction tech at work I bet. They just don't need to be run that hard to produce results I assume.

Edit- Bingo! Found it in the industrial brochure. Inches SDS.

And I forgot about this one. Another design I like.
View attachment 3154761
Click to expand...
!
:o.

A beauty ...
 
stardustsailor

stardustsailor

Well-Known Member
LED Companies w/ LINKS
(SDS's ..'edition' )


Introduction for the led -newcomers :

>:(>:(>:(>:(>:(
FGS! Once and for all .....
Pay some attention here ...
:cuss::cuss::cuss::cuss::cuss:



Chapter #1 :
All time classics ! HID-busters!
( by random order )

-Han's Panel (Holland-EU )
http://www.bonsaihero.com/

-Area51 (USA )
http://a51led.com/store/index.php

-ApacheTech (USA )
https://www.apachetechinc.com/
-Lumigrow(USA )
http://www.lumigrow.com/
Chapter #2 :
Hi-end ! Only for the few ...(who have much )
( by random order )

-Illumitex (USA )
http://www.illumitex.com/

-Valoya(Finland-EU )
http://valoya.com/

-Atomsvet (Russia )
http://www.atomsvet.com/production/bio/

Chapter #3 :
Not for growers!
Only for 'ganja-scientists' ...(who have even more )
( by random order )

-Heliospectra (Sweden-EU )
http://www.heliospectra.com/

-Licor(USA )
http://www.licor.com/env/products/photosynthesis/chambers/6400-18.html

-Caution: Everything else is of questionable
efficiency,quality,worth and value.
Be aware !
....
List may be updated without further notice .
I may 've forgotten few others ...

Cheers .
...
bongsmilie


Caution #2 :Do yourselves a favor and Save your money by staying away from Alibaba,alienexpress ,china e-bay sellers and the rest of 37 thieves ....
Put your pennies in a piggy ...
At one point ,with a bit of patience ,you might get something worthy in return...

If you still want to "throw away" your money for leds ...
A better option would be the "educative " one ...

(Hey !...Maybe you'll even end up ,having a far more decent led grow light ,
than any of the "Black-dark-star-dog-miaou- lion-bloom-diamond-emerald-crystal-booster-motha-fucka -crappa "of P.R.C. led light ...)

Enter the world of DIY ...

Just do not be tempted by the low prices of ali baba and his 40
(..00.000.000 or so ) thieves ..You buy -pure- junk !
Low-end quality,possibly dangerous/hazardous,uncertified Piece of shit ,with
a bad -printed label on it ..
(FGS ! They can't afford a fuckin decent label,for cryin' out loud ! )
You 'll find it out by yourselves-
-That you've actually bought LETs!!!
Light Emitting Turds - ..
.Soon or later ..

( Author of present article is a poor led -diyer/ plant biologist/alchemist /
spaceman/vampire-hunter, with a PhD in kitchen stove reflow soldering .
Poor bastard lives ,the latest 38 years ,in a beautiful sunny shit-hole ,
forgotten by gods and demons ,somewhere in SouthEast Europe ..)
 
Last edited:
stardustsailor

stardustsailor

Well-Known Member
BTW ...
Fran ,I need an opinion from you ....

The prices seem good enough ?

http://www.cutter.com.au/proddetail.php?prod=cut1556

http://www.cutter.com.au/proddetail.php?prod=cut1557

http://www.cutter.com.au/proddetail.php?prod=cut1558

http://www.cutter.com.au/proddetail.php?prod=cut1554

http://www.cutter.com.au/proddetail.php?prod=cut1560&cat=201

http://www.cutter.com.au/proddetail.php?prod=cut1559&cat=201

and their connector/holder
http://www.cutter.com.au/proddetail.php?prod=cut1529


I'm pretty interested on all those above ..

(Possible matching with couple of CXA3590 ...
.3000K or 2700K+4000K
In a new ...design ....Don't tell anybody ..Shhhh...)

I like the F1 & F3 spectrums ...

illumi spectra.JPG


surexi elec.JPG


Any other suggestions for those litltle wonders ?

(I love their array holder feature!!!!..What a convenient 'coincidence ' ! )

Thanx ,Fran !

Cheers .
:peace:
 
Last edited:
FranJan

FranJan

Well-Known Member
Yeah SDS I agree those F1, F3 prices are good and are probably their best horti models under most conditions IMHO, though 730 on all the time seems to be overkill. The other ones not so much. They do have the F4,F5,F8 Abeos but they seem pricey. The AD 44s seem good too, but I gotta double check that. I don't really look at them for some reason. I always figured they were hard to cool. The kits are a ripoff though IMO :(. (And I can see the USD amount on the site btw). I can get the F3s with IDC, (I like 'em :)) for 200.00 USD + shipping so that's my baseline. Have you checked Mouser EU? I saw individual whites for sale on their site.

If you see the 730s for sale, give me a shout. I'm soooo close to ripping out the 730s on my old Vipar to do 13/11 but I want to keep it as a backup really. But there's sooooooo many 730s on it I can hear them calling to me, begging me to free them :) LOL.

And yes PF I'm aware Busta's Makin' Lumens sell 730s ;).
 
Last edited:
FranJan

FranJan

Well-Known Member
stardustsailor

stardustsailor

Well-Known Member
FranJan said:
http://eu.mouser.com/ProductDetail/Illumitex/AV446S-500BW/?qs=sGAEpiMZZMsOFNBiu4ETezLRtShB8iN1
IDK about their old whites. Very underwhelming, but I still would want to see one before passing judgement.

The new ones are crazy though. 10 degree beam angles, or DD90 I believe :), with their diffuser. So a diffuse LED with a 10 degree beam angle. What?

http://eu.mouser.com/ProductDetail/Illumitex/ARBW9S-100/?qs=sGAEpiMZZMsuj5tdPuAIdzjE%2b%2bSw5C3gDKgHpL%2byNwE=
Click to expand...


LOL!

:wink:

Hmm...
They seem to know 'something more'...
(This one is for greenhouse use ,right ?
Oris it just for general lighting ? )
 
chowljj

chowljj

New Member
stardustsailor said:
Had one like those floods ,doing some night time construction works ..
Lasted about a year ...Good one ..LOL

The other was in the garden with a motion sensor built in ...
Lasted couple of months ...

Great investment there ....
You only lose ~$30...
Pretty honest ....
Click to expand...
could you show me some flood light with motion sensor ?
 
stardustsailor

stardustsailor

Well-Known Member
chowljj said:
could you show me some flood light with motion sensor ?
Click to expand...
http://www.myled.com/p6303-led-floodlight-10w-700-800lm-high-power-induction-cool-white-black-ac85-265v.html

http://www.myled.com/p5517-waterproof-led-flood-light-20w-1600-1700lm-cob-induction-cool-white-grey-220v.html

http://www.myled.com/p5509-waterproof-led-flood-light-20w-1600-1700lm-cob-induction-cool-white-white-220v.html

http://www.myled.com/p6302-led-floodlight-10w-700-800lm-high-power-induction-warm-white-black-ac85-265v.html

Oh,dude ,it has plenty of them ...
 
You must log in or register to reply here.
Top