Hash and Oil Picture Thread

[doubletake]

The only fucked up think about that stuff is^
It came out great but in between taking it out and putting another one in my dogs knocked it over face down into the carpet...... I went bought some tweezers and sat for like 2 hrs picking every hair out but it still like sizzles and pops and taste bad so it's ruined good little 12 gram patty just wasted so I'm pissed luckily that patty was my material not my friends.

I'm thinking make a batch or a few batches of edibles with it?
Anybody else ever do that with like some forever goo or any batches that you guys have ruined?

 

[Bublonichronic]

My oil always seems to have a dog hair or two, nobody seems to mind anyway, if it's bad I'll just winterize it

 

[WarMachine]

I would winterize it like Bubloni suggested.

 

[Thundercat]

I was thinking the same thing War. Seems like a simple fix to save 12g of material. Who knows it might even turn out better then it was in the first place .

 

[WarMachine]

I was thinking the same thing War. Seems like a simple fix to save 12g of material. Who knows it might even turn out better then it was in the first place .

Yup I agree. 12g is a big number to simply say screw it, at least for me lol. And your right, it could be even better than before! I noticed when I winterize, my oil always seems smoother.

 

[budbro18]

Shit that could make a lot of edibles. But yeah you could winterize. Hell even just redissolve and filter will get all the bull shit out. I usually make edibles out of the couple gs on the edges of my round dish. Heat to 250 for 15-20 minutes in a pyrex. Make sure the oil is at 250 for 15-20 so the whole process takes about 30 for it to slowly heat up to temp. Then combine with either coconut oil/butter, or make some sort of candy. Ive made some pretty good hard candies before. Sugar edibles hit you really quick. No 45-60 minutes its like 5-15 max.

As for shatter yeah generally under 100 is best but some strains 100 barely gets a reaction after a day so its hard.

I go with what the material can handle. Ill know before i even pack the tube how itll be at the end usually. Most of the stuff i run is my own material and its a very stable resin strain and ive been growin it for about a year. Its so stable that it is hard to get shatter cause it stops reacting at sub 100 temps quick. So ive accepted basically always gettin wax/over shatter.

But when we get material from other people when we set it out to dry i can already tell how its gonna be just by handlin the material a little. Feel the resin how sticky, or sandy it is just as is then press my fingers together and you can kinda get an idea if youll be able to go low and slow enough to get shatter or if its just too stable that itll stop reacting early and have to be bumped up.

 

[doubletake]

Shit that could make a lot of edibles. But yeah you could winterize. Hell even just redissolve and filter will get all the bull shit out. I usually make edibles out of the couple gs on the edges of my round dish. Heat to 250 for 15-20 minutes in a pyrex. Make sure the oil is at 250 for 15-20 so the whole process takes about 30 for it to slowly heat up to temp. Then combine with either coconut oil/butter, or make some sort of candy. Ive made some pretty good hard candies before. Sugar edibles hit you really quick. No 45-60 minutes its like 5-15 max.

As for shatter yeah generally under 100 is best but some strains 100 barely gets a reaction after a day so its hard.

I go with what the material can handle. Ill know before i even pack the tube how itll be at the end usually. Most of the stuff i run is my own material and its a very stable resin strain and ive been growin it for about a year. Its so stable that it is hard to get shatter cause it stops reacting at sub 100 temps quick. So ive accepted basically always gettin wax/over shatter.

But when we get material from other people when we set it out to dry i can already tell how its gonna be just by handlin the material a little. Feel the resin how sticky, or sandy it is just as is then press my fingers together and you can kinda get an idea if youll be able to go low and slow enough to get shatter or if its just too stable that itll stop reacting early and have to be bumped up.

Ya man I'm super bummed
How would you go about getting it through a filter again?
Or mabey a quick run down of winterizing if it's not too difficult I could look it up if it's a long process.

Yeah man I have my griddle at 150, I need to get a laser thermometer so I can see oil temp.

But I'll be purging take it out and it's still slightly hard so I always feel like I could go higher but don't, I'll try another batch low, slow, and spread super thin.

Yeah man it was pretty crazy this material yields way more then I expected. I was getting like a gram a can/ounce from my trim then got this stuff and got like 55 grams off of 24 grams total good suprise haha
I like running good trim way better then buds just cause it's way easier not to have to grind all the buds up. Just pack and blast.

 

[doubletake]

Yup I agree. 12g is a big number to simply say screw it, at least for me lol. And your right, it could be even better than before! I noticed when I winterize, my oil always seems smoother.

Yea man I was so bummedI lost about 9 grams to the dogs eating a plastic container full, then that 12 gram patty falling in the carpet and seeing that, all in one day I was just like fuck my life, sat for a moment and just........said fuckkkkkk haha
I'm excited to try and winterized this stuff though atleast.

 

[doubletake]

My oil always seems to have a dog hair or two, nobody seems to mind anyway, if it's bad I'll just winterize it

Hahaa mine too bud just this has like lots just little ones I can't even see so it's pretty much screwed, I picked at it for like a hr and still when dabbed it sizzled so I think it's screwed.
But this winterizing thing might be good.

 

[doubletake]

A few more hrs ahhhh

 

[Mr. Bongwater]

don't look like much but really good hash, gets u ripped

 

[Mr. Bongwater]

anybody smoke hash by dabbing it on a cig and letting it burn in a bottle, thats the best way

 

[Thundercat]

Yea man I was so bummedI lost about 9 grams to the dogs eating a plastic container full, then that 12 gram patty falling in the carpet and seeing that, all in one day I was just like fuck my life, sat for a moment and just........said fuckkkkkk haha
I'm excited to try and winterized this stuff though atleast.

Ok first Kill the damn dog! Stuff like this is why I refuse to let my wife and daughter get an animal. My house and space has no place for dog hair and an animal fcking shit up! Don't get me wrong I love animals, just not in houses.

Secondly, to clean that up, redisolve the oil into warm ethanol (everclear). Then place said mixture into the freezer for 24-48 hours, after which you filter it in the freezer. This will remove any of the bad crap, and also most likely some of the left over lipids from your material. I think its very possible you'll get a shatter after this process. Once its filtered just evap the alcohol and ta da you have some clean dabs agian.

 

[budbro18]

Ok first Kill the damn dog! Stuff like this is why I refuse to let my wife and daughter get an animal. My house and space has no place for dog hair and an animal fcking shit up! Don't get me wrong I love animals, just not in houses.

Secondly, to clean that up, redisolve the oil into warm ethanol (everclear). Then place said mixture into the freezer for 24-48 hours, after which you filter it in the freezer. This will remove any of the bad crap, and also most likely some of the left over lipids from your material. I think its very possible you'll get a shatter after this process. Once its filtered just evap the alcohol and ta da you have some clean dabs agian.

Yupp only thing id change about that is the warm ethanol. Having warm ethanol helps but any alcohol wash is already stripping some terps so the heat will only hurt more. Id suggest crumbling it into small pieces first then sprinkling it in. But yeah after that do waht he said above.

Its best to use a buchner funnel but if you just use like a mason jar, take off the inner lid, then screw down a coffee filter into the top and filter through. Make sure you try to keep it cold while doin this to because they can re-dissolve in the alcohol if the temp rises too much. Do it outside if youre in a cold part of the world.

 

[Thundercat]

I agree any type of processing is gonna remove some terps. By warm alcohol I meant around 90-100 degrees, certainly no higher then you'd warm your shatter when you vac. Really though you've got alot more experience with this. I make qwiso so I never have to do this extra stuff. Just a different side to the same coin. Speaking of dabs I think its about time to go have one .

 

[WarMachine]

Yea man I was so bummedI lost about 9 grams to the dogs eating a plastic container full, then that 12 gram patty falling in the carpet and seeing that, all in one day I was just like fuck my life, sat for a moment and just........said fuckkkkkk haha
I'm excited to try and winterized this stuff though atleast.

Man what kind of beast animal do you have to cost you so much oil. I have a Boxer and luckily he knows better lol. He help me decide what's chronic too. If he smells itand licks his lips, it's good! Lol

 

[budbro18]

a

I agree any type of processing is gonna remove some terps. By warm alcohol I meant around 90-100 degrees, certainly no higher then you'd warm your shatter when you vac. Really though you've got alot more experience with this. I make qwiso so I never have to do this extra stuff. Just a different side to the same coin. Speaking of dabs I think its about time to go have one .

Hell yeah my friends headin over with his piece and im gettin my enail all set up!

Gettin SHATTERDAY started off right!

And yeah when i dissolve anything in alcohol, besides edible/rso runs, i do it at room temp which for me is about 65-70 sometimes even lower. Its SOOOOOOOOOOO slow but in the end youll notice the little difference. I usually do this with the sides of my round pyrex weve been blastin into because it fits in the chamber so we can purge in our blasting chamber before scraping. Also for vac'n iso/etho i start with not heat for the first 12 hours or so because it will usually react for that long without heat.

I also dont use heat for purging off the initial alcohol either. Just throw some cheese cloth/screen over the top and set it in a warm place in my house which isnt really over 75-80. Im rarely in any rush doing these washes because its cleaning out the 1-3 gs left in the pyrex while the main slab is still vac'n so im never in a rush for it.

Last but not least ive found that when i do this wash its generally harder for me to get it to wax up on me. Now it does have to do with strain because i have gotten it before but out of 10 runs, 8 of which the main slab stayed shatter, and 2 buddered during the multi day purge, only 1 of those 9 ever waxed up on me when purging the iso/etho washed few gs.

I even took one to 140 for 24 hours because it was a super smelly strain as shatter so as wax it was gonna be too loud. Came in the next morning expecting to see a nice little cookie and NOPE! Still sappy????? This was the same stuff that was rock solid when i pulled it out the vac at 90+ degrees and shattered when i set it down.

Some crazy actin shit i tell ya what.

And thats why i have cats!!!!! They surprisingly dont fuck with shit as much as the normal cat. We trained them well.

 

[torturekiller420]

You could re-dissolve it back into butane via the thermos method and then go about your normal routine after its been filtered out of the thermos or mason jar.

 

[budbro18]

You could re-dissolve it back into butane via the thermos method and then go about your normal routine after its been filtered out of the thermos or mason jar.

Very true just a little more of a hassle. Gotta do it outside. And since the butanes so cold it takes a lil bit of time to redissolve but 100% doable with minimal effects to flavor. Id recommend the thermos since itll be sittin there for a little bit to fully dissolve.

 

[torturekiller420]

Right, and im not sure where your located at Doubletake, but here its cold and with a little snow on the ground. If the same applies to you, you wont have to worry so much about keeping your thermos in a bucket of ice or submerged in a ice-water bath in a cooler to keep the butane in a liquid state. Just burry it in some snow. Don't forget to poke some pressure relief holes in your lid for when your blasting into it to fill it up. Yes this method takes some time and can be a bit of a hassle, but I mention it because it seemed like the op was most familiar with butane extractions. Sorry if this is wrong DoubleTake.