DonTesla
Well-Known Member
Should invite me over more!!!
Cause I got dat fiya homie..
Bed is cleared and a couple diesels be transplanted in..
Beans popping galore..
The Dons' Organic Garden
- Thread starter DonPetro
- Start date
Cause I got dat fiya homie..
Bed is cleared and a couple diesels be transplanted in..
Beans popping galore..
DonPetro
Well-Known Member
Gotta love bagseed...you seem to have good luck finding gems.
radicaldank42
Well-Known Member
are you sure its not just leeroy and noy lee Roy og caus ei think you're thinking of Larry og
norcal mmj
Well-Known Member
@radicaldank42, I think your dumb, you know what I have better than me ? Lol do you need more info or is this good. 
DonTesla
Well-Known Member
We sure do have good luck finding gems, you know..I feel I can grow SLCh and almost command gravy to pheno-ize itself..if we really want..
Gotta believe it to achieve it..
Gotta ask for it to receive it..
Here's a beauty from seed, bagseed..
Your sour deis no less..embedded and headed for a single beheading..
In other words, topped once, no lst yet..that's next..
They've been praying for days with no frass, its been a gd show..this is after lights out so they were sleeping and this ones still a bit perky. It was hot in there, like plus thirty, and felt I had to water since I was gonna be late tending that night..
Next to the SD is a cute lil baby from the Provision boys.. The stout lil DPK which is in the yellow cup. Deep purp
Last edited:
DonPetro
Well-Known Member
Sorry, which ones are the sour ds?
http://hempdepot.ca/seeds/GageGreen/index.html
And check out the new drops of GG @ HD
http://hempdepot.ca/seeds/GageGreen/index.html
Last edited:
Mr.Head
Well-Known Member
Lee Roy is legit and so is there description. I got a couple freebies from Attitude and it's getting revegged now. Nice OG flavours decent yield. Dense nugs that change colour. Frosty for days.
The first five things they mention I deal with and it helps them all pretty well. Going to be in my garden for a long time after a reveg. I may be willing to part with some clones after I run it a couple times and make sure the reveg didn't stress it into herming out next time she flowers.
The first five things they mention I deal with and it helps them all pretty well. Going to be in my garden for a long time after a reveg. I may be willing to part with some clones after I run it a couple times and make sure the reveg didn't stress it into herming out next time she flowers.
DonTesla
Well-Known Member
The sour deisels are the two who are topped and in the bed.
DonPetro
Well-Known Member
Holy shit they are just pumpin! Didnt think they were that far along already. They look healthy and there seems to be a good amount of vigor in that strain. That one in the foreground does look familiar now.
Mr.Head
Well-Known Member
Here's some Lee Roy shots. She's revegging super fast looked last night and she's got 2 inch shoots new full leaves coming in.
These pics are from a fucked up grow she definitely never hit her full potential she didn't like the soil late flower. Under this new DIY LED Vero 29 rig and my new mix and I bet she looks even better
These pics are from a fucked up grow she definitely never hit her full potential she didn't like the soil late flower. Under this new DIY LED Vero 29 rig and my new mix and I bet she looks even better
cannakis
Well-Known Member
And you definitely have to believe! You have not because you ask not is right.!
DonPetro
Well-Known Member
Can you share any pics of your DIY luminaire...i'm all about the DIY lighting now @DonTesla can attest. Got 4 vero 18 3500k v2 arriving tomorrow for my next project. Should be amazing. I gotta build one for myself one of these days though.Here's some Lee Roy shots. She's revegging super fast looked last night and she's got 2 inch shoots new full leaves coming in.
These pics are from a fucked up grow she definitely never hit her full potential she didn't like the soil late flower. Under this new DIY LED Vero 29 rig and my new mix and I bet she looks even better
View attachment 3459161 View attachment 3459162 View attachment 3459163
Mr.Head
Well-Known Member
Sure can Don, it's not the cleanest looking light out there
But it's not bad for a first attempt . Some miss measures and some design changes had to be made due to driver cord length and what have you.I've actually got it out of my grow right now so I'll get some good shots. I put some crazy glue on all the nuts and bolts on the frame, fucking loctite is like $10 for a small ass tube
Krazy glue was like $5 for 5 tubes Cobs are 3 Vero 29 4000k Drivers 17.5 inches apart are Meanwell CEN-100-42. 1 driver per Cob figured if 1 failed I'd still have a light this way cost quite a bit more but in the long run I'm hoping it makes it easier on me. Heatsinks are Arctic 64's. WAGO and the Vero connectors. makes building these suckers a breeze. Disconnected a fan and ran one light fanless for a 8 hour stretch unintentionally and she held
I used the little insulating washers I got with old PC screw kits and they actually hold in the little molex Vero connector nicely.
These guys in the LED section really made this shit easy as pie to figure out. All owed to them.
Attachments
DonPetro
Well-Known Member
You spared no expense on those drivers...real nice. I never dreamed of building such bad ass lights until i lurked in the LED section for about three months. Now im blowing peeps minds. You chose a good spectrum too. That 4000k is money imo.Sure can Don, it's not the cleanest looking light out there
I've actually got it out of my grow right now so I'll get some good shots. I put some crazy glue on all the nuts and bolts on the frame, fucking loctite is like $10 for a small ass tube
Cobs are 3 Vero 29 4000k Drivers 17.5 inches apart are Meanwell CEN-100-42. 1 driver per Cob figured if 1 failed I'd still have a light this way cost quite a bit more but in the long run I'm hoping it makes it easier on me. Heatsinks are Arctic 64's. WAGO and the Vero connectors. makes building these suckers a breeze. Disconnected a fan and ran one light fanless for a 8 hour stretch unintentionally and she held
I used the little insulating washers I got with old PC screw kits and they actually hold in the little molex Vero connector nicely.
These guys in the LED section really made this shit easy as pie to figure out. All owed to them.
Mr.Head
Well-Known Member
Yeah those drivers cost me like 200 then customs fucking nailed me getting them here from Cali. Lesson learned. Look into shipping options because anything over base shipping from UPS doesn't have duty fee's I thought I was saving money until I got another bill on delivery.
Wasn't impressed but the light should last for a long time and my 400watt HPS should cover most the cost when I sell it.
Wasn't impressed but the light should last for a long time and my 400watt HPS should cover most the cost when I sell it.
DonPetro
Well-Known Member
Yea most people dont realize just how cost effective these DIY lights are. What scares me is the ineveitable commercialization of our beloved COBs. I see its already happening in fact with members from this very forum looking to cash in. Makes me feel uneasy a lil bit. I will never buy a commercially manufactured light as i have the know how to build pretty much any light for any given space with custom specs.
radicaldank42
Well-Known Member
Rite but you callled it lee roy og at first its kust lee roy. Sorry for being technical
DonTesla
Well-Known Member
Yesssssssssss!!!! You da man DP!! And yee, this winter you gotta go ham for yourself!! Lets see a couple tomato garden pics up in this thread!! Cousin of the herb.. Those beasts are gorrrrgeous...
Amen and kudos for bridging the gap and becoming the bridge itself that connects us to DIY LED... Really has allowed me to focus on other goals.. What a team!
The 4000k don't play .. Frost at day 21 got me like woah