Hi I have grown my cannabis and it was in bloom flowering for 9.5 weeks had on flush started on week 8 for 1.5 weeks it looked great smelled great I checked all ways i clouds look up well I think checklist •timing of strain 9 to 10 weeks checked •hairs turned dark the only light coloured ones towards the bottom •tricomes check though 60x microscope looked at all top most of middle and bottom some the top was all milky and couple amber about to amber in the middle range of the plant had even less amber but had a little clear and bottom had no amber and little bit clear so next morning before the lights came on i unplug the light and kept them in the dark for couple more hours due to unexpected family coming round after that had gone i processed to harvest and set my tent up for drying I had finished all time to dry placed the bud on it’s line all light it blocked I had my intake on only has one speed it’s fresh air direct and have one fan that goes side to side two speeds on speed two on the floor and out take has two settings it’s on setting one the temp it sitting at 14 to 18 temp and. 50 to 60 humidity (researchered not experience) stayed like this till today the buds are dry storks don’t snap thay bend IVe bin checking temp humidity once a day after the first day to see if maintaining both which it was fine what do it do I looked at a bud that fell of on the net underneath the bud I looked at it under the microscope to see if tricomes stayed I see milky cloudy and amber and a tiny tiny amount of clearish ones to it smells a tiny bit it didn’t grid to dust small bits broke of and the other bits didn’t grind stringy and clog up as much as thought but not raw smell like it did first 2 days it wasn’t 100% dry but drying much faster then wat it’s supposed to be am sure help guys sorry if my spelling out and that it’s this long but really need help like do I put a humidifier in there or ?? Thanks guys ASAP please
Problem in drying
- Thread starter Ginge211
- Start date
Wattzzup
Well-Known Member
Could you understand his post? I read the whole thing but it was a tough read. No offense OP but some punctuation might make it a touch easier to read and get more replies.
I also hang to dry for 14 days then jar if that’s even what your question was OP.
2Hearts
Well-Known Member
I just guess he read how to dry in a tent controlling humidity and with many fans and advised him to give the other less complicated method a shot next time.
EtherBlaze
Member
That was the longest run on sentence, your question got lost at the end.
I think what may work:
Hang to dry in a dark place with just a little airflow to keep the RH below 80% as possible.
Your drying can take up to 7+days, depending on density/size and how you trimmed the branches.
This is all before the curing process. Smoking before a good cure will leave you with a less then optimal experience.
I think what may work:
Hang to dry in a dark place with just a little airflow to keep the RH below 80% as possible.
Your drying can take up to 7+days, depending on density/size and how you trimmed the branches.
This is all before the curing process. Smoking before a good cure will leave you with a less then optimal experience.
