greenleaf megacrop

P10p

Well-Known Member
Just received mega crop v3 1 part. Using it in soil I'll let you know how it fairs. May try running 1 plant with nothing but MC and see how it does.
 

Attikus112

Well-Known Member
V3 just came out and is 100% not shipping to Europe yet according to GLN so how would I know if mine is v1 or v2 the video is only confirming v2 vs v3

I wonder if Europe is 2 versions behind USA or just 1 version behind
There's a difference in color between v1 and v2, see the photo below. My v2 (or v2.5) lists the npk as 9-6-17 like yours, but I'm not sure what the npk ratio was for v1 so all i can say is if it's the tan color with the 9-6-17 ratio it's probably v2 or v2.5.

20200623_112618.jpg
 

AquaTerra

Well-Known Member
V3 just came out and is 100% not shipping to Europe yet according to GLN so how would I know if mine is v1 or v2 the video is only confirming v2 vs v3

I wonder if Europe is 2 versions behind USA or just 1 version behind

Did you ask them or send them a photo of the label?
 

Attikus112

Well-Known Member
Not got round to it yet. Figured I’d ask you guys first. @Attikus112 this is the one I’ve got. Your left one looks way darker and right one looks obviously way lighter as it’s white.

If this is v1 Europe is miles behind
From that picture I would still say it's version 2 or 2.5. I found a nice summary of the different versions on reddit and the link is included below.

The short summary was:
V1: 10-5.5-14.5
V2: 9-6-17
V2.5: 10-7-18*
*They may have been putting v2.5 in v2 bags.

https://www.reddit.com/r/MegacropGrowers/comments/guuvlm
 

Snowback

Well-Known Member
"They may have been putting v2.5 in v2 bags."

They were doing it. The Megacrop main guy was talking about it on Overgrow and I had a sack of it myself (newer stuff in old sack). I b^tched about it a few pages ago.
 

Attikus112

Well-Known Member
It would be nice if they just added a sticker with the version to the bag and kept the labels for each version on their website.
 

Snowback

Well-Known Member
I've only been using the Part A for a couple of weeks but I am able to give small amount of feedback at this point.

I believe that I am really noticing the availability of the amino-chelated magnesium. I'm too lazy to pull it up but the percentage is a little over 7% if I recall correctly, which makes it one of the highest magnesium-by-percentage fertilizers I have ever used. The leaves are extra lush and dark green with a nice sheen to them. Not dark green in an overly fed way, but instead a very healthy look, complete with praying and perfect tips. Sorry, don't have pics so you just have to trust me. ;)
Obviously two weeks is not much time to make a realistic assessment of how well it works but so far I am very pleased and wanted to share.

Current formula (for ProMix HP):

Water once per day on a two day cycle feed and "flush" schedule.
Day 1: 0.9 EC Dynagro Foliage Pro + 0.5 EC MegaCrop Part A (1.4 combined EC)
Day 2: 0.2 EC calcium nitrate (Botanicare Kind base) "flush"

Lots of runoff and Ph is adjusted up using Potassium Silicate until end of stretch and Potassium Hydroxide thereafter.

thanks for reading!

Edit: Forgot the most important part. It's a new strain from seed but so far at 3 1/2 weeks flower development looks very respectable for the amount of time. No complaints.
 
Last edited:

Rakin

Well-Known Member
Ive started using the 2 part on my outdoor coco hempy tomatoes. Ive played around with the ratio and I am really starting to like it. I read about people complaining about smell when mixed, but I honestly believe smelly nutrients make a better smelling and tasting fruit/flower so I dig that. The stuff mixes clearer then anything I've ever used. I haven't tried mixing in a stock solution and honestly don't see the need to. I mix 20 something gallons at a time. I use hard tap water and ph down. I also use rainwater mixed with tap to get ph. My plants are really happy and starting to dig it which is awesome in this summer heat. The ppm calculator is awesome.
 

Rakin

Well-Known Member
The pH stability seems pretty good with the 2-part so far. I mixed up some of the recommended bloom schedule two weeks ago (4.2g A, 1.8g B) with a pH of 5.99 and after two weeks it was 6.20.
Heck that's an awesome improvement. Even though im DTW the ph stability is really important early on.
 

Snowback

Well-Known Member
Ive started using the 2 part on my outdoor coco hempy tomatoes. Ive played around with the ratio and I am really starting to like it. I read about people complaining about smell when mixed, but I honestly believe smelly nutrients make a better smelling and tasting fruit/flower so I dig that. The stuff mixes clearer then anything I've ever used. I haven't tried mixing in a stock solution and honestly don't see the need to. I mix 20 something gallons at a time. I use hard tap water and ph down. I also use rainwater mixed with tap to get ph. My plants are really happy and starting to dig it which is awesome in this summer heat. The ppm calculator is awesome.
A few months later. How are you finding it? Still good?
 

Snowback

Well-Known Member
Megacrop A and GH CocoTek "Grow A" (3-0-1), mixed at 1.5 mls per liter of the CocoTek and .4 mls per liter of the megacrop gives 1.0 EC with my water and a beautiful ultra-stable 6.1 PH. It's a true two part and has been working quite nicely so far.

I previously did a couple testers of Dynagro Foliage Pro and megacrop A at .6 mls per liter. It grew great plants but the burn was a little "dirty", so that's why this time I am trying something a little weaker.

Will update in the future if I remember.
 

TintEastwood

Well-Known Member
Top