Sticky's Stealth Stash

A day of defeat...I completely broke off one of my mains on the Mazar trying to train her after a feeding. I gotta stop overstressing these ladies :( I dropped the branch into rockwool and into the soil right about where she would have been in formation. We shall see if that pulls through. My girl in flower is looking awesome. Can't wait for that harvest! Switching to RAW nutes for her next feeding.

It's all good brother, we all have those days. One time I sucked up a sprout on accident with a shop vac when I was suckin up the overflow from the tray underneath. The hose had a mind of its own that day lmao.

I like the RAW nutes, only ever used the yucca, still do, its good quality only need a tiny bit.
 
Chopped her last night. Turned the fan down to level 2 as the newest biggest veg light is actually cooler than the smaller ones and its a bit chilly in the veg chamber now....

I may have jumped the gun on at least one of the toppings, hopefully she starts picking up speed again soon!

I may need to increase my RAW feeding chart for flower, the PPM was a bit low when I fed the first feeding on the girl in flower last night.
 

Attachments

  • 20210106_215840.jpg
    20210106_215840.jpg
    6 MB · Views: 1
  • 20210107_185235.jpg
    20210107_185235.jpg
    5.5 MB · Views: 0
  • 20210107_185326.jpg
    20210107_185326.jpg
    6.3 MB · Views: 0
  • 20210107_185356.jpg
    20210107_185356.jpg
    6.2 MB · Views: 1
  • 20210107_185401.jpg
    20210107_185401.jpg
    6.8 MB · Views: 1
  • 20210107_185418.jpg
    20210107_185418.jpg
    6.4 MB · Views: 1
  • 2CAA8E5DCBAA_1610067307269.png
    2CAA8E5DCBAA_1610067307269.png
    1.4 MB · Views: 2
  • Screenshot_20210107-213202_Apogee Connect.jpg
    Screenshot_20210107-213202_Apogee Connect.jpg
    188.4 KB · Views: 4
  • 20210107_213235.jpg
    20210107_213235.jpg
    1.8 MB · Views: 4
  • 20210107_213306.jpg
    20210107_213306.jpg
    5.9 MB · Views: 4
Another week in the books. Tucked some leaves in veg to expose the tops, she should pick up speed soon and quickly haha! May be stepping on myself if my flower girl isn't finished. She is fattening up so I can't wait for that to be ready!

Also started using a 1.3 gal pitcher with a small pond pump to move the water before I start adding nutrients as the kelp was sticking to the container if I just dropped it in. Thats working awesome. I can fine tune my pH so much easier that way! I may do a video on this process for my YouTube channel!
 

Attachments

  • 20210110_215331.jpg
    20210110_215331.jpg
    1.4 MB · Views: 3
  • 20210110_215344.jpg
    20210110_215344.jpg
    1.9 MB · Views: 4
  • 20210110_215350.jpg
    20210110_215350.jpg
    1.5 MB · Views: 4
  • 20210110_215416.jpg
    20210110_215416.jpg
    1.5 MB · Views: 4
  • 20210110_215446.jpg
    20210110_215446.jpg
    1.5 MB · Views: 2
  • 20210110_215456.jpg
    20210110_215456.jpg
    7.2 MB · Views: 1
  • 20210110_215622.jpg
    20210110_215622.jpg
    7.5 MB · Views: 1
  • 20210109_211532.jpg
    20210109_211532.jpg
    6.3 MB · Views: 1
New video!! I think 3 more weeks for the cookies before harvest. Mazar is starting to take off! Trying to train her horizontally.

 

Attachments

  • 20210116_173132.jpg
    20210116_173132.jpg
    3.9 MB · Views: 2
  • 20210116_173410.jpg
    20210116_173410.jpg
    1.7 MB · Views: 1
Been a minute since I've posted. Both ladies are doing awesome. Cookies n cream up top is ready to chop any day now as she's showing amber all over even down low. Sampled a tiny bit of the cookies to see how its turning out, should be dry in a few days, not worrying about a rushed dry on that tho.

Mazar is getting almost as wide as the box. At this point I'm going to let her start growing upwards. So many tops now showing at the same hight as the rest of the canopy. Gotta maybe cull some of them to let her focus more of her energy on the mains.

Custom 3x3x8 is coming along nicely :D

More about everything in the links below:

Https://instagram.com/blumenbot



 

Attachments

  • 20210122_224945.jpg
    20210122_224945.jpg
    7.2 MB · Views: 1
  • 20210123_210431.jpg
    20210123_210431.jpg
    7.6 MB · Views: 6
  • 20210123_204624.jpg
    20210123_204624.jpg
    1.6 MB · Views: 7
  • 20210123_204630.jpg
    20210123_204630.jpg
    7.5 MB · Views: 7
  • 20210123_204636.jpg
    20210123_204636.jpg
    1.6 MB · Views: 1
  • image.png
    image.png
    8 MB · Views: 1
  • 1611460048554_image.png
    1611460048554_image.png
    8 MB · Views: 4
  • 20210123_211340.jpg
    20210123_211340.jpg
    8.2 MB · Views: 3
Love your grow closet, its like a pro version of what I've been running in for over 10 years. Yours is so clean. What have you used as the door seal?
 
Love your grow closet, its like a pro version of what I've been running in for over 10 years. Yours is so clean. What have you used as the door seal?
Currently it's basic "large gap" weatherstripping from the hardware store. I'm looking to get custom 1 piece gaskets made with 90* corners to match the exact opening but it's a bit of an initial investment to make the mold n such.
 
Thank you for the compliments Smiffy!!

Long overdue update again...I have been neglecting this thread as I've been keeping the grow diaries up to date every day.

Today was chop day for the cookies. I did a wet trim and hung her whole in the veg chamber. Perfect fit.

Mazar is literally a fucking bush....straight up jungle...I'm going to ddfoliate but I am going to be highly selective with what I remove. I'm hoping she stretches a foot or so in flower but that may be asking a lot.

So stoked on this harvest. I'm hoping for 4 oz to last me after cure till the next harvest is ready. Time will tell, she smells amazing.




 

Attachments

  • 20210207_130132.jpg
    20210207_130132.jpg
    1.3 MB · Views: 4
  • 20210207_134048.jpg
    20210207_134048.jpg
    1.5 MB · Views: 5
  • 20210207_134140.jpg
    20210207_134140.jpg
    5.1 MB · Views: 4
  • 20210207_134241.jpg
    20210207_134241.jpg
    3.3 MB · Views: 5
  • 20210207_134251.jpg
    20210207_134251.jpg
    2.3 MB · Views: 7
  • 20210207_143804.jpg
    20210207_143804.jpg
    1.4 MB · Views: 10
  • 20210207_143810.jpg
    20210207_143810.jpg
    1.4 MB · Views: 6
  • 20210207_143836.jpg
    20210207_143836.jpg
    1.8 MB · Views: 8
Currently it's basic "large gap" weatherstripping from the hardware store. I'm looking to get custom 1 piece gaskets made with 90* corners to match the exact opening but it's a bit of an initial investment to make the mold n such.
Ah man, why had i never thought of that, great idea, i even think i have some at home somewhere, mayy have a look, that'll keep me busy tonight. Yeah i wouldnt even know where to start with molds and that, good luck with that, and enjoy your harvest man
 
170g of dried cookies n cream going into the cure for 2 months. Sample vape session got me blown! Can't wait for Mazar!
 

Attachments

  • 20210215_163218.jpg
    20210215_163218.jpg
    1.7 MB · Views: 3
  • 20210215_163941.jpg
    20210215_163941.jpg
    2.6 MB · Views: 3
  • 20210215_163135.jpg
    20210215_163135.jpg
    1.3 MB · Views: 3
  • 20210215_161451.jpg
    20210215_161451.jpg
    2 MB · Views: 3
  • 20210214_213652.jpg
    20210214_213652.jpg
    3 MB · Views: 3
  • 20210214_213649.jpg
    20210214_213649.jpg
    1.6 MB · Views: 3
Back
Top