Just Bought A Pound Of Morning Glory Seeds.....

Status
Not open for further replies.
D

dbtwiztid

Member
Ganjaglutin said:
Recipe:

LSA Soup


Ingredients:

20000 Morning Glory Seeds- ie. 1 pound

Naphtha- ie Non Polar Solvent

Large Bottles

Funnel

Filters

Water or Everclear- ie Polar Solvents

200ml Vial


OPTIONAL:

Coffee Grinder

Dehydrater

and the universal ingredient, Time.....



Grind the seeds in coffee grinder. place the seeds into a jar, and add just enough naphtha to cover the seeds. Put lid on, shake for five minutes, and let sit for one hour. then pour the solution into a funnel with a coffee filter in it, discard liquid, and let the seed mush to dry. once it has dried, place the DRIED seed powder into a CLEAN jar, and take the Everclear and soak the seeds. Close the lid and shake. let sit for 3 days, shaking a few times a day. then pour the liquid into a funnel with a coffee filter, and save the liquid. discard the seed mush.

Pour the liquid into the bottle and let it sit for 2 hours, after 2 hours any remaining seed power will settle to the bottem. Once that as happened pour the liquid into a jar, and wash out the seeds in the bottle. pour the alcohol back into the 50ml bottle, there should be some alcohol missing, so take some more Everclear and fill the 50ml bottle to the top. I should have 150mls of drinkable Liquid LSA from approx 20000 morning glory seeds.normal dosages for these seeds is 200 to 400 seeds. ONE ml of this liquid is equal to 200 seeds!!! drop 3mls into your mouth and its the same thing as 600 seeds, and it wont make you feel sore at all!!!

Now All Thats Left To Do Is Enjoy Your LSA Soup!
Click to expand...
Definately want to try this..

How much does Naptha run for? What store did you buy it at? Could I get it somewhere like Home Depot or Lowe's?

I'm planning on just buying Everclear from a liquor store but how much did it cost you, do you remember? I know its like 95% alcohol so I'm assuming it isn't going to be cheap.


Another question is what would be the best way to grind up the seeds without using a coffee grinder? Have any methods?
 
Ganjaglutin

Ganjaglutin

New Member
LSA Is Like Mild Acid. VERY MELLOW. Some One On Here Did A Good Comparison, LSA To Shrooms. But When You Hallucinate On LSA The Hallucinations Are Acid Like In Nature Not Shrooms.
 
Ganjaglutin

Ganjaglutin

New Member
The Trick Is Finding A Legitamite Dealer Rather Than Some Bullshit Smartshop Online Like Any Site With "Shaman" In It Name.
 
dannyking

dannyking

Well-Known Member
Man theres hoffmans all over my town at the moment. Even been turning some people down on free acid. Have no idea where it came from. Must have been a one off shipment or somthing because its usually very hard to find.
 
D

dbtwiztid

Member
Ganjaglutin said:
Get An Acid Test And Test One. If Its Real, Go Buy Acid Like Crazy.
Click to expand...
I was checking that Eden website and couldn't find those Pearly Gate (?) types you were talking about that were supposedly better.

What can I do to try and make this shit the "best" that I can?

Have heard reports that it doesn't give much visuals..

When you drink it is it like drinking everclear? I heard somewhere that it was gooey...
 
Ganjaglutin

Ganjaglutin

New Member
Well According To The Chemical Analysis On Erowid Heavenly Blue Has The Least Of All. Weird, Ironic, And Conflicting Huh. I'm Still Gonna Use Blues Because I've Grown Quite Fond.

OH BOY.
You will need:
A few flasks, glass containers, etc. of suitable sizes, depending on how large a volume you are playing with. A separating funnel is almost essential - this could be tricky to get without a little effort. If you don't know, it is an inverted conical flask with a hole at the top to pour stuff in , and a tap at the bottom to let the stuff out accurately . It is used for separating immiscible layers. A vacuum filtration apparatus would be very useful; I did have a bodgy one rigged up myself, but it was always difficult to use. Some kind of still, though, is pretty important to have, although conceivably for a once off you could get by without it, if you don't mind breathing in a lot of solvent. As far as still goes it is to recover solvent, and leave goodness as a residue at the bottom. I use a bit of quickfit I nicked: a round bottom flask, short column, thermometer on top, and a small condenser... takes for ever, but don't expect to follow this procedure in anything under a day. Other bits and pieces: A filtre of some sort is a necessity; preferably a good one, with a vacuum pump if you are filtring gluggy stuff (cactus is the worst, sticky goo, e.g., other things like seeds and bark are better).
People have been known to use such devices as coffee filtres, t-shirts, tins with holes in the bottom (as a filtre press) and so on. Whatever you can scrounge. A lab buchner funnel, sidearm flask, and venturi pump are ideal. All this stuff is standard in any chemical lab, regardless of discipline. (cont'd in part ii) CTION part ii: Chemicals necessary: The paydirt (obviously) Some solvents: methanol (lots), and a non polar solvent. Some people use ether - this is dangerous and doesn't dissolve everything. Your best bet is probably something chlorinated - I use dichloromethane, although chloroform will do (don't breath too much - it is fun at first, but ends up making you feel ill). Drycleaning fluid... petrol.... I don't know what you have access to.
Dichloromethane is good because it is non-toxic, volatile, and a good solvent. It has a major drawback: separation is often very difficult once you have placed your gluggy plant muck in there. The shot is to use large quantities of everything, and be patient. You will also need an acid (Hydrogen chloride is good) and a base/alkali (Sodium hydroxide is good - that way, if you stuff up, you end up synthesizing salt instead of something nasty.) Also useful: acid/base indicator paper, boiling chips (porcelain grains) and activated charcoal - see local chemist.
The idea is this: Most fun compounds (the only exception is maybe THC, and alcohol if you count that) are basic - they contain nitrogen. So: in general, if you react them with hydrochloric acid, the form a water soluble chloride. If you react them with dilute base in the aqueous phase, they go back to being a base, which is insoluble in water, but soluble in organic non-polar solvents (like CH2Cl2). So, the theory is, that only a base will go from water to solvent and back to water etc. when changed from acidic to basic and back to acidic. This gives you a way of removing all the other crap which is not alkaloid from a sample. That is the theory. When I do this, if I can get down to some brown or green sludge that I can throw down or smoke, I am happy with a good days work. Ideally, you should end up with lovely white crystals, but I think that would require a lot of time and effort, and indeed a considerable loss of product in the process.
Procedure:
Get your stuff. Dry it as much as possible - this makes life easier later on. You will never get all the water out, but too bad. Chop it up as fine as possible: a blender comes in handy. You may wish to chop then dry. A word of caution : try to avoid exposing your stuff to excessive heat. I dry in low heat oven. Heat and air destroy good compounds from upwards of 100 degs C. All this bit will depend on exactly what you are extracting. Once it is finely divided - powdered if possible, put it in a big container, and cover it with methanol. Alternatives to methanol here are ethanol (not as good) and acetone (good solvent - rips the crap out of anything, but is more reactive - can react with your actives). Now, depending on what your stuff is, you have to let the methanol have time to remove it all. This is best done by leaving in a quiet warm place for a few days, even up to a week, and shaking it occasionally so it is mixed. Some papers recommend solvent extraction (soxhlet apparatus) and refluxing at the boiling point of the methanol (80 degs or so - I can't remember). I usually just rely on time to get the good stuff out. When you are ready (early in the morning), filtre the muck, to give you methanol+dissolved brown gunk, and a residue soaked with methanol. The residue still contains a lot of good stuff, so soak again for an hour, and repeat, and do a third time if you are feeling generous (3 is the magic number in extraction work).
When you are done, there is another thing you can do finally, if desired: depending on what your stuff is, mix it up with dilute hydrochloric acid, 1M is appropriate. let stand for an hour, then filtre (this may be very difficult) That will get the last of the alkaloids out of the substrate. (continued in part iii) EXTRACTION part iii You now have a methanol-plant stuff mixture, and a dilute HCL-plant stuff mixture, if you bothered to do that part. Evaporate the methanol, to leave a small amount of goo. This will contain water, a bit of methanol, and all kinds of resins and muck, and if you are lucky, the alkaloids. If a very quick and crude extraction was all that was desired, then after stripping the last of the methanol with vacuum if possible, this residue could be smoked eaten or whathaveyou. I leave that to your discretion.
However, if a cleaner product is desired, the double layer extraction will need to be performed. Combine the evaporated methanol gunge with the hydrochloric acid filtrate if you have any. If you don't then mix the methanol stuff with an excess of dilute (1M) HCl. Feel free to filtre again at this point. Anything of marginal solubility here is no good to you. Get the stuff as clean as possible. Boiling with activated charcoal is another useful trick for removing gunge. Just boil it up, and filter off the charcoal for a cleaner brew. You should now have an acid aqueous solution of alkaloids and water solubles from the plant. Take your acidic solution, and bassify. This is done by mixing in dilute sodium hydroxide (I use up to 5M to save on total volume. Be careful with conc NaOH - apart from eating skin, it eats alkaloids) As you mix in the NaOH, you will see swirls of white precipitate form and redissolve. Continue until the white swirls stay, and until the solution is quite cloudy. Indicator paper is necessary to see that the solution is basic.
If you can't get indicator paper, you can make an indicator by boiling up some purple flowers. The dyes in most flowers go bright red in acid, and green in strong alkali. Just a drop of dye and a drop of mixture should tell you what is acid or base.
The white precipitate is the alkaloids. The more the better. Next, add equal volume of non-polar solvent (dichloromethane) to the mix. Place in separating funnel, and shake. Separate. This may be very difficult or slow. Adding more solvent, more basic water, etc. may help. Adding lots of salt to the water layer will help break an emulsion. Ideally you want it do this step 3 times - to extract as much as possible from the water layer into the organic. I find this part very difficult, and you have to accept that you will lose quite a lot of material here. It is, however probably easier with some plants that others: cactus is very difficult, barks and seeds would be easier. Use plenty of salt, and agitate to separate. When you have finished extraction, chuck the basic water layer. The solvent layer is kept, and can be backwashed with salty water for a cleaner mixture.
The solvent can now be dried, (using salt or some dry powder, the filtred) (I don't usually bother with this - the old hairdryer at the end can remove some last solvent and water) then strip the solvent in a vacuum to get your final product - some kind of syrup could be expected. This is super concentrated, but may only be half the strength of the original. e.g. put in enough for 10 doses of morning glory seeds, get back 5 doses or more of concentrated alkaloids. If it is desired to take the process still further, you can do the obvious thing - mix your solvent layer with dilute acid again and extract back into water. Acid layer could be evaporated under vacuum to give salts of alkaloids. Alternatively, if the organic layer were scrupulously dry, bases could be salted out with some organic acid - a tartrate, oxalate could be formed. I have never bothered with such things - you would need a lot of pure extract in the end to be bothered.
The acid-base extraction process can be continued as many times as is desired. If a truly pure product is desired, the only way to go from here is chromatography. I have never used this at home, and wouldn't think it was worth the trouble.

JESUS CHRIST THATS ALOT.


Like I've Said Before. Hawaiian Baby Woodrose Doesnt Have Alot Of d-Lysergic Acid Amide (LSA or Ergine) It Contains Alot Of Lysergamides. Morning Glories Contain Alot Of Actual Ergine.


You Can Definitely Feel The Everclear Burn. But Like Someone Said Its A Psychedelic Liquor It Tastes Really Earthy.
 
D

dbtwiztid

Member
Ganjaglutin said:
Well According To The Chemical Analysis On Erowid Heavenly Blue Has The Least Of All. Weird, Ironic, And Conflicting Huh. I'm Still Gonna Use Blues Because I've Grown Quite Fond.

OH BOY.
You will need:
A few flasks, glass containers, etc. of suitable sizes, depending on how large a volume you are playing with. A separating funnel is almost essential - this could be tricky to get without a little effort. If you don't know, it is an inverted conical flask with a hole at the top to pour stuff in , and a tap at the bottom to let the stuff out accurately . It is used for separating immiscible layers. A vacuum filtration apparatus would be very useful; I did have a bodgy one rigged up myself, but it was always difficult to use. Some kind of still, though, is pretty important to have, although conceivably for a once off you could get by without it, if you don't mind breathing in a lot of solvent. As far as still goes it is to recover solvent, and leave goodness as a residue at the bottom. I use a bit of quickfit I nicked: a round bottom flask, short column, thermometer on top, and a small condenser... takes for ever, but don't expect to follow this procedure in anything under a day. Other bits and pieces: A filtre of some sort is a necessity; preferably a good one, with a vacuum pump if you are filtring gluggy stuff (cactus is the worst, sticky goo, e.g., other things like seeds and bark are better).
People have been known to use such devices as coffee filtres, t-shirts, tins with holes in the bottom (as a filtre press) and so on. Whatever you can scrounge. A lab buchner funnel, sidearm flask, and venturi pump are ideal. All this stuff is standard in any chemical lab, regardless of discipline. (cont'd in part ii) CTION part ii: Chemicals necessary: The paydirt (obviously) Some solvents: methanol (lots), and a non polar solvent. Some people use ether - this is dangerous and doesn't dissolve everything. Your best bet is probably something chlorinated - I use dichloromethane, although chloroform will do (don't breath too much - it is fun at first, but ends up making you feel ill). Drycleaning fluid... petrol.... I don't know what you have access to.
Dichloromethane is good because it is non-toxic, volatile, and a good solvent. It has a major drawback: separation is often very difficult once you have placed your gluggy plant muck in there. The shot is to use large quantities of everything, and be patient. You will also need an acid (Hydrogen chloride is good) and a base/alkali (Sodium hydroxide is good - that way, if you stuff up, you end up synthesizing salt instead of something nasty.) Also useful: acid/base indicator paper, boiling chips (porcelain grains) and activated charcoal - see local chemist.
The idea is this: Most fun compounds (the only exception is maybe THC, and alcohol if you count that) are basic - they contain nitrogen. So: in general, if you react them with hydrochloric acid, the form a water soluble chloride. If you react them with dilute base in the aqueous phase, they go back to being a base, which is insoluble in water, but soluble in organic non-polar solvents (like CH2Cl2). So, the theory is, that only a base will go from water to solvent and back to water etc. when changed from acidic to basic and back to acidic. This gives you a way of removing all the other crap which is not alkaloid from a sample. That is the theory. When I do this, if I can get down to some brown or green sludge that I can throw down or smoke, I am happy with a good days work. Ideally, you should end up with lovely white crystals, but I think that would require a lot of time and effort, and indeed a considerable loss of product in the process.
Procedure:
Get your stuff. Dry it as much as possible - this makes life easier later on. You will never get all the water out, but too bad. Chop it up as fine as possible: a blender comes in handy. You may wish to chop then dry. A word of caution : try to avoid exposing your stuff to excessive heat. I dry in low heat oven. Heat and air destroy good compounds from upwards of 100 degs C. All this bit will depend on exactly what you are extracting. Once it is finely divided - powdered if possible, put it in a big container, and cover it with methanol. Alternatives to methanol here are ethanol (not as good) and acetone (good solvent - rips the crap out of anything, but is more reactive - can react with your actives). Now, depending on what your stuff is, you have to let the methanol have time to remove it all. This is best done by leaving in a quiet warm place for a few days, even up to a week, and shaking it occasionally so it is mixed. Some papers recommend solvent extraction (soxhlet apparatus) and refluxing at the boiling point of the methanol (80 degs or so - I can't remember). I usually just rely on time to get the good stuff out. When you are ready (early in the morning), filtre the muck, to give you methanol+dissolved brown gunk, and a residue soaked with methanol. The residue still contains a lot of good stuff, so soak again for an hour, and repeat, and do a third time if you are feeling generous (3 is the magic number in extraction work).
When you are done, there is another thing you can do finally, if desired: depending on what your stuff is, mix it up with dilute hydrochloric acid, 1M is appropriate. let stand for an hour, then filtre (this may be very difficult) That will get the last of the alkaloids out of the substrate. (continued in part iii) EXTRACTION part iii You now have a methanol-plant stuff mixture, and a dilute HCL-plant stuff mixture, if you bothered to do that part. Evaporate the methanol, to leave a small amount of goo. This will contain water, a bit of methanol, and all kinds of resins and muck, and if you are lucky, the alkaloids. If a very quick and crude extraction was all that was desired, then after stripping the last of the methanol with vacuum if possible, this residue could be smoked eaten or whathaveyou. I leave that to your discretion.
However, if a cleaner product is desired, the double layer extraction will need to be performed. Combine the evaporated methanol gunge with the hydrochloric acid filtrate if you have any. If you don't then mix the methanol stuff with an excess of dilute (1M) HCl. Feel free to filtre again at this point. Anything of marginal solubility here is no good to you. Get the stuff as clean as possible. Boiling with activated charcoal is another useful trick for removing gunge. Just boil it up, and filter off the charcoal for a cleaner brew. You should now have an acid aqueous solution of alkaloids and water solubles from the plant. Take your acidic solution, and bassify. This is done by mixing in dilute sodium hydroxide (I use up to 5M to save on total volume. Be careful with conc NaOH - apart from eating skin, it eats alkaloids) As you mix in the NaOH, you will see swirls of white precipitate form and redissolve. Continue until the white swirls stay, and until the solution is quite cloudy. Indicator paper is necessary to see that the solution is basic.
If you can't get indicator paper, you can make an indicator by boiling up some purple flowers. The dyes in most flowers go bright red in acid, and green in strong alkali. Just a drop of dye and a drop of mixture should tell you what is acid or base.
The white precipitate is the alkaloids. The more the better. Next, add equal volume of non-polar solvent (dichloromethane) to the mix. Place in separating funnel, and shake. Separate. This may be very difficult or slow. Adding more solvent, more basic water, etc. may help. Adding lots of salt to the water layer will help break an emulsion. Ideally you want it do this step 3 times - to extract as much as possible from the water layer into the organic. I find this part very difficult, and you have to accept that you will lose quite a lot of material here. It is, however probably easier with some plants that others: cactus is very difficult, barks and seeds would be easier. Use plenty of salt, and agitate to separate. When you have finished extraction, chuck the basic water layer. The solvent layer is kept, and can be backwashed with salty water for a cleaner mixture.
The solvent can now be dried, (using salt or some dry powder, the filtred) (I don't usually bother with this - the old hairdryer at the end can remove some last solvent and water) then strip the solvent in a vacuum to get your final product - some kind of syrup could be expected. This is super concentrated, but may only be half the strength of the original. e.g. put in enough for 10 doses of morning glory seeds, get back 5 doses or more of concentrated alkaloids. If it is desired to take the process still further, you can do the obvious thing - mix your solvent layer with dilute acid again and extract back into water. Acid layer could be evaporated under vacuum to give salts of alkaloids. Alternatively, if the organic layer were scrupulously dry, bases could be salted out with some organic acid - a tartrate, oxalate could be formed. I have never bothered with such things - you would need a lot of pure extract in the end to be bothered.
The acid-base extraction process can be continued as many times as is desired. If a truly pure product is desired, the only way to go from here is chromatography. I have never used this at home, and wouldn't think it was worth the trouble.

JESUS CHRIST THATS ALOT.


Like I've Said Before. Hawaiian Baby Woodrose Doesnt Have Alot Of d-Lysergic Acid Amide (LSA or Ergine) It Contains Alot Of Lysergamides. Morning Glories Contain Alot Of Actual Ergine.


You Can Definitely Feel The Everclear Burn. But Like Someone Said Its A Psychedelic Liquor It Tastes Really Earthy.
Click to expand...
Well I definately didn't expect that, going to stick with the original neptha/everclear instructions.

My goal is to make a batch to test among me and my friends, then depending on how good the trip is I may consider selling quantities to people. Only because I know some biscuits who would probably believe it was "liquid acid" (Dumb little freshman kids..)

All this is just to get some money to build a grow room.. if I wasn't flat broke and jobless i wouldn't even bother with this..

If that happens I want to move up from the one pound to the 5 pound batch.

Another question of mine is I put the seeds in a jar, then just cover the top with naptha, or enough to soak all the seeds?
 
Ganjaglutin

Ganjaglutin

New Member
I Would Hopes So.

Oh Yah. Pounds Would Be Awesome. But Expensive. Not Because Of The Seeds. Because Of The Massive Amounts Of Naphtha And Everclear You Would Need.

Swarthy Bastard! LMAO I Soak Sugar Cubes In The Solution. AWESOME.

Grow Room Huh. Sounds Alot More Noble Than This. But You Could Make More Money This Way In The Time It Would Take To Finish Growing And Drying.


Place The Powder Into A Jar And Pour In Enough Of The Naphtha To Fully Cover The Seeds. You Can't Really Use Too Much, But Leave Enough Room So It Shakes Well. The Seeds Will Lose Most Of Their Mass So You Want To Have A Good Amount.
 
Status
Not open for further replies.
Top