Good ISO hash
- Thread starter ogkush420
- Start date
greenfirekilla420
Well-Known Member
Ya and in my opinion cooking everclear is ALOT more dangerous than letting rubbing alcohol evaporate. I mean if I'm wrong then what ever dude but man..
Ha ha I know I'm blazed as hell right about now.
Ha ha I know I'm blazed as hell right about now.
NewGrowth
Well-Known Member
If I put it in my vape it would just melt down onto the heating element
b0bdyl4n420
Well-Known Member
next time just shake it in the mason jar for about a minute tops. it'll be much more pure
EDIT- but less yield. so its reall personal preference
kremnon
Well-Known Member
Production
Isopropyl alcohol is produced by combining water and propene.[2] There are two processes for achieving this: indirect hydration via the sulfuric acid process and direct hydration. The former process, which can use low-quality propylene, predominates in the USA while the latter process, which requires high-purity propylene, is more commonly used in Europe. These processes give predominantly isopropyl alcohol rather than 1-propanol because the addition of water or sulfuric acid to propylene follows Markovnikov's rule.
The indirect process reacts propylene with sulfuric acid to form a mixture of sulfate esters. Subsequent hydrolysis of these esters produces isopropyl alcohol. Direct hydration reacts propylene and water, either in gas or liquid phases, at high pressures in the presence of solid or supported acidic catalysts. Both processes require that the isopropyl alcohol be separated from water and other by-products by distillation. Isopropyl alcohol and water form an azeotrope and simple distillation gives a material which is 87.9% by weight isopropyl alcohol and 12.1% by weight water.[3] Pure (anhydrous) isopropyl alcohol is made by azeotropic distillation of the "wet" isopropyl alcohol using either diisopropyl ether or cyclohexane as azeotroping agents.
[edit] Uses
Toxicology
Isopropyl alcohol is oxidized by the liver into acetone by alcohol dehydrogenase. Symptoms of isopropyl alcohol poisoning include flushing, headache, dizziness, CNS depression, nausea, vomiting, anesthesia, and coma. Use in well-ventilated areas and use protective gloves while using. Poisoning can occur from ingestion, inhalation, or absorption.
Isopropyl alcohol is about twice as toxic as ethanol, and acts as a central nervous system (CNS) depressant. Its metabolite, acetone, is a CNS depressant in its own right. Around 15 g of isopropanol can have a toxic effect on a 70 kg human if left untreated. However, it is not nearly as toxic as methanol or ethylene glycol.[8] Isopropyl alcohol does not cause an anion gap acidosis (in which as lowered blood serum pH causes depletion of bicarbonate anion) as do ethanol and methanol. Isopropyl alcohol does, however, produce an osmolal gap between the calculated and measured osmolalities of serum, as do the other alcohols. Overdoses may cause a fruity odor on the breath as a result of its metabolism to acetone, which is not further metabolized.[9]
Isopropyl alcohol is produced by combining water and propene.[2] There are two processes for achieving this: indirect hydration via the sulfuric acid process and direct hydration. The former process, which can use low-quality propylene, predominates in the USA while the latter process, which requires high-purity propylene, is more commonly used in Europe. These processes give predominantly isopropyl alcohol rather than 1-propanol because the addition of water or sulfuric acid to propylene follows Markovnikov's rule.
The indirect process reacts propylene with sulfuric acid to form a mixture of sulfate esters. Subsequent hydrolysis of these esters produces isopropyl alcohol. Direct hydration reacts propylene and water, either in gas or liquid phases, at high pressures in the presence of solid or supported acidic catalysts. Both processes require that the isopropyl alcohol be separated from water and other by-products by distillation. Isopropyl alcohol and water form an azeotrope and simple distillation gives a material which is 87.9% by weight isopropyl alcohol and 12.1% by weight water.[3] Pure (anhydrous) isopropyl alcohol is made by azeotropic distillation of the "wet" isopropyl alcohol using either diisopropyl ether or cyclohexane as azeotroping agents.
[edit] Uses
Toxicology
Isopropyl alcohol is oxidized by the liver into acetone by alcohol dehydrogenase. Symptoms of isopropyl alcohol poisoning include flushing, headache, dizziness, CNS depression, nausea, vomiting, anesthesia, and coma. Use in well-ventilated areas and use protective gloves while using. Poisoning can occur from ingestion, inhalation, or absorption.
Isopropyl alcohol is about twice as toxic as ethanol, and acts as a central nervous system (CNS) depressant. Its metabolite, acetone, is a CNS depressant in its own right. Around 15 g of isopropanol can have a toxic effect on a 70 kg human if left untreated. However, it is not nearly as toxic as methanol or ethylene glycol.[8] Isopropyl alcohol does not cause an anion gap acidosis (in which as lowered blood serum pH causes depletion of bicarbonate anion) as do ethanol and methanol. Isopropyl alcohol does, however, produce an osmolal gap between the calculated and measured osmolalities of serum, as do the other alcohols. Overdoses may cause a fruity odor on the breath as a result of its metabolism to acetone, which is not further metabolized.[9]
I just cleaned out my grinders in jar of 91% ISO and first i was doubting..But as soon as the metals touched the ISO it got cleaned and everything was in the ISO jar. Than i pour that into a prytex bowl and left a fan blowing it... Didnt get much since i didnt have much on the grinder but by far the best way and easiest to make hash at home...
b0bdyl4n420
Well-Known Member
hmmmm with that you kinda got me worried.. everclear is the same method except you boil it off instead of letting it evaporate? anything else i can use instead of everclear cause there is none in my area
kremnon
Well-Known Member
u can use denatured alcohol u can buy it at the hardware store. u can make ur own moon shine.
have u ever just made some quick water hash. u don't really need hash bags unless ur doing a lot.
just mix ur herb with water and plenty of ice put it in a jar shake it up, strain it thu a paint strainer then through sum silk panties u ripped off from ur lady.
cover a jar with the panties, make a depression and slowly pour, the hash will get left behind, scape it off with a knie press it and dry.
make good quality hash and clean too. (dirty panties optional)
have u ever just made some quick water hash. u don't really need hash bags unless ur doing a lot.
just mix ur herb with water and plenty of ice put it in a jar shake it up, strain it thu a paint strainer then through sum silk panties u ripped off from ur lady.
cover a jar with the panties, make a depression and slowly pour, the hash will get left behind, scape it off with a knie press it and dry.
make good quality hash and clean too. (dirty panties optional)
and EXACTLY how much ISO is left over in say, 10 grams of iso hash, after it is thoroughly DRY?
if you can answer this i may change my opinion.
and i am burning it, not ingesting. i don't see the effects of inhaling burnt fumes.
The Warlord
Well-Known Member
how long for the alcohol to evaporate?
i let mine sit for WEEKS. i don't smoke it if it's gooey. it should NOT be gooey. it starts out dry, it should end up dry. when i scrape my oil it chips and flakes.
i rarely use ISO. i'm more a butane kinda guy. i do use ISO to clean my hash pressing screens, though. they get a build up of bubble hash on them and clog up. i put them in a small porcelain bowl and pour about a 1/4 cup of ISO over it. then i swish it around until the screen is clean. i then remove the screen from the bowl and put the bowl on a shelf until it is DRY. this can take anywhere from a week to a month, depending on the room temp and the amount of ISO in the bowl.
so how much ISO am I really "smoking"? and what do smoke fumes do to me? not ingesting it or breathing the vapors, but actually inhaling BURNT fumes.
The Warlord
Well-Known Member
Thanks 
you need a fdd oil pipe to do that.
https://www.rollitup.org/toke-n-talk/229759-i-made-new-oil-pipe.html
Cyproz
Well-Known Member
well can i buy those or is there a DIY guide for one? what exactly is an fdd pipe and how does it differ from a regular pipe/bowl?
also how much would u charge to make me one if u could? i would pay like 200-300 bucks for that. and can i use it with like iso hash and not oil hash. i have never made oil hash before, i make iso and bubble cause im afraid of blowing my face off making butane oil hash lol.
also how much would u charge to make me one if u could? i would pay like 200-300 bucks for that. and can i use it with like iso hash and not oil hash. i have never made oil hash before, i make iso and bubble cause im afraid of blowing my face off making butane oil hash lol.
i'm working out all the kinks right now. i will be making more in the near future. next month or 2 i should have a few more.
pm me price.