Fred Flintstoner
Active Member
I thought I would post my control board to possibly give anyone else some ideas to start with, or of course share their own Control Board triumphs too.
Feel free to also critique, comment, suggest, etc..I am here to learn.
Here is my control board that houses nearly all of the electrical components that operate within my closet.
This is above waist and mounted to 2 separate 2x4's in the wall, I love it and it made my life in the closet organized and possibly to actually work in properly and safely.
Always a work in progress. Power lines feed the outlets I have mounted to it from the top of the board and there is also a UPS on a shelf right below the board off Picture for backup power.
Left Side:
2 4Port G&H Air Pumps - 1 for each room.
Inside/Outside Thermometer & Outside Hygrometer for 400w Room
UPS Power Strip
Fan Power STrip for Fan Control by Plant Pro for 600w Room
Center:
Plant Pro - This regulates CO2, Fans, Water Pump, and Light for 600w Room
Right:
400w Ballast
600w Ballast
4 Power Outlets Total - 15Amp Breaker per 2 outlets
Temp Control Boxes - These shutoff power to lights of temp goes over desired level.
PWX-1 - This is used to keep my light off of same breaker as plant pro control panel.
Got a small 6" air king there off to far right putting some cool on those electronic ballasts...not really needed but a precaution I suppose.
Here are some closeups:
Feel free to also critique, comment, suggest, etc..I am here to learn.
Here is my control board that houses nearly all of the electrical components that operate within my closet.
This is above waist and mounted to 2 separate 2x4's in the wall, I love it and it made my life in the closet organized and possibly to actually work in properly and safely.
Always a work in progress. Power lines feed the outlets I have mounted to it from the top of the board and there is also a UPS on a shelf right below the board off Picture for backup power.
Left Side:
2 4Port G&H Air Pumps - 1 for each room.
Inside/Outside Thermometer & Outside Hygrometer for 400w Room
UPS Power Strip
Fan Power STrip for Fan Control by Plant Pro for 600w Room
Center:
Plant Pro - This regulates CO2, Fans, Water Pump, and Light for 600w Room
Right:
400w Ballast
600w Ballast
4 Power Outlets Total - 15Amp Breaker per 2 outlets
Temp Control Boxes - These shutoff power to lights of temp goes over desired level.
PWX-1 - This is used to keep my light off of same breaker as plant pro control panel.
Got a small 6" air king there off to far right putting some cool on those electronic ballasts...not really needed but a precaution I suppose.
Here are some closeups: