ok well its been awhile since ive written on here and a lot has changed. when i began growing it was soil all the way but got tired of the mess the pest problems spacing issues.... but anyway i digress after four crops decided to try dwc multiple plant systems and multiple strains but a beautiful slh. two crops later and many adjustments to style of growing ive decided to do a large sog dwc system that will give me a crop every two weeks.
the system is taken from a similar system iv seen online using soil.the guy was doing i think 26 plants and was having approx a pound every two weeks.so with that in mind i set forth on this unknown adventure and invite you to come along for the ride.
as setup is still mid way through completion i will get pics up soon.
ok well the stats are as goes
2X 400w hps
2X 600w hps
1X 125w cfl
20X computer cooling fans intake
4X computer cooling fans outtake
4X diy meter square dwc units
2X diy dwc mother plant units
1X dwc cloner
2X 840 ltr/hr air pumps
ph stick
Ec stick
ph up/down
formulex
ionic bloom
ionic boost
pk 13/14
adv nut overdrive
lots and lots of large wall plugs
and cant forget the strain
G-BOMB
5 fem seeds germinated and placed in dwc for mothers unit 24/7 lighting (cfl)
now before we go on i know well the problems that can arise using multiple plant systems but i am also aware of the benefits.
now in roughly 5 weeks i will be taking my first load of cuttings will be aiming for
a good 200 which will then be dipped in clonex and placed into large wall plugs in dwc cloner lid. they will be left for 2 weeks even though a root system will be establised in 12 days the extra two days will help.
ok now to the plants and spacing.
in the meter square tanks will be 60-70 plants per tank. this may seem alot but if you take into account that as soon as they go from cloner to tank they will go straight into flower. so it will essentially be 60-70 large single main colas the bottom third will be stripped bare to give better airflow and will leave room to tie back certain fan leaves.
the first load will be placed in tank 1 with a target ec of 1.6-1.8 target ph 5.7 under 400w bloom and boost mix they will stay in this tank for two weeks moved to tank 2 with target ec of 1.8-2.0 same ph under 400w.
bloom/boost/pk13/14 as i move from tank 1 to tank 2 i put another 60-70 plants into tank 1.
two weeks later i move from tank 2 to tank 3 target ec of 2.0 same ph under 600w bloom/boost/overdrive
two weeks later i move from 3 to tank 4 ec of 1.6 ph same under 600w first week boost/overdrive mix second week ph adjusted water. and move the rest around introduce the new lot to tank 1
2 weeks later the first crop comes off and from that point on i just repeat the process and love the fortnightly crop.
so that about covers it once first load goes in i will be posting pics every week to show progress
hope you enjoy the ride
the system is taken from a similar system iv seen online using soil.the guy was doing i think 26 plants and was having approx a pound every two weeks.so with that in mind i set forth on this unknown adventure and invite you to come along for the ride.
as setup is still mid way through completion i will get pics up soon.
ok well the stats are as goes
2X 400w hps
2X 600w hps
1X 125w cfl
20X computer cooling fans intake
4X computer cooling fans outtake
4X diy meter square dwc units
2X diy dwc mother plant units
1X dwc cloner
2X 840 ltr/hr air pumps
ph stick
Ec stick
ph up/down
formulex
ionic bloom
ionic boost
pk 13/14
adv nut overdrive
lots and lots of large wall plugs
and cant forget the strain
G-BOMB
5 fem seeds germinated and placed in dwc for mothers unit 24/7 lighting (cfl)
now before we go on i know well the problems that can arise using multiple plant systems but i am also aware of the benefits.
now in roughly 5 weeks i will be taking my first load of cuttings will be aiming for
a good 200 which will then be dipped in clonex and placed into large wall plugs in dwc cloner lid. they will be left for 2 weeks even though a root system will be establised in 12 days the extra two days will help.
ok now to the plants and spacing.
in the meter square tanks will be 60-70 plants per tank. this may seem alot but if you take into account that as soon as they go from cloner to tank they will go straight into flower. so it will essentially be 60-70 large single main colas the bottom third will be stripped bare to give better airflow and will leave room to tie back certain fan leaves.
the first load will be placed in tank 1 with a target ec of 1.6-1.8 target ph 5.7 under 400w bloom and boost mix they will stay in this tank for two weeks moved to tank 2 with target ec of 1.8-2.0 same ph under 400w.
bloom/boost/pk13/14 as i move from tank 1 to tank 2 i put another 60-70 plants into tank 1.
two weeks later i move from tank 2 to tank 3 target ec of 2.0 same ph under 600w bloom/boost/overdrive
two weeks later i move from 3 to tank 4 ec of 1.6 ph same under 600w first week boost/overdrive mix second week ph adjusted water. and move the rest around introduce the new lot to tank 1
2 weeks later the first crop comes off and from that point on i just repeat the process and love the fortnightly crop.
so that about covers it once first load goes in i will be posting pics every week to show progress
hope you enjoy the ride