Search results

  1. M

    Pheno Hunting with Crocketts Tangie

    I guess it depends on what you want to do with the final product. if it's all personal then I would be looking for taste and effect. If it's a commercial operation then you need to add yield, health and finishing time
  2. M

    New setup

    I normally work it out at 4500-5000 BTU's per 1000W and air cooled hoods need about half that. If you're happy with your setup at only 4 lights then 12000 BTU split unit will be a little more then you need but it means it won't be straining to keep things cool and will last longer.
  3. M

    Room venting question

    Depends on the size of your room and is it a sealed room or not
  4. M

    Still too hot

    If you've got central A/C have you considered using an inlet fan to push the cold air from your room into your tent
  5. M

    heat to much heat!

    What sort of lighting are you using? You could always look for a second hand portable AC unit if it's a small grow without heavy duty lighting.
  6. M

    best CO2 product that you recommend/have used

    CO2 tank with an auto system that keeps your levels over 1000ppm
  7. M

    Topping Point

    I prefer to top when you have another two nodes. The healthier the plant the quicker things pick up after topping. I also top higher up
  8. M

    Cooling six 600w hps lights

    What AC are you currently running?
  9. M

    GH Exile, Defguard and Prevasyn

    Hi folks. Anyone tried these new products from GH? I've used Azamax during veg before when I had a few bugs and it worked pretty well but these seem to be more targeted depending on your problem. Exile also advertises it's safe to use on tobacco(except in California). I'm not saying it's...
  10. M

    Commercial growers' height from canopy to light

    When you have a lot of lights in a room the overlap means you can raise them higher and still get the same amount of light per square foot as less lights at a lower height. It's also because with so many lights you don't want to be moving them up and down all the time.
  11. M

    New setup

    If you do decide to get an AC a 16000BTU split unit should be fine for 6 600W lights
  12. M

    Boosts/excellerators etc!

    I used liquid koolbloom and floralicious. They both worked pretty well for me and I did increase yield over previous harvests without them but the problem is I never did side by side tests so I can't tell you it was because of the additives or because of experience.
  13. M

    So what if the cooltube fan fails? FIRE?!

    What is with all the thread revivals on threads 2+ years old?
  14. M

    Boosts/excellerators etc!

    If you want to stick with GH you could start using koolbloom
  15. M

    anyone have a 22k sq ft. canopy business plan?

    I think your really going to struggle to get that information. It costs a ton of cash to get all the plans and documentation done so very few are going to want to then share that out for free.
  16. M

    To grow monsters or keep it smaller?

    I prefer a scrog personally. Easier to control the canopy and even out the growth and light each section gets
  17. M

    Am I overwatering?

    Those are very large pots for pretty small plants. The problem your going to have is if you feed till you get run off it's going to take a long while for the plants to absorb all the water out of the pots as they haven't developed the necessary root mass. You should gradually increase the size...
  18. M

    Lights

    If they're just babies like your photo then you could turn off half the light easily and you won't see much of a difference. You wouldn't need to turn on the extra lights for about three weeks.
  19. M

    How do you go about flipping from veg to flower?

    I know a few people like to leave every third or fourth light as a MH light or use hanging vertical MH lights to suplliment their HPS lights and provide a different spectrum to try and keep the stretch down
Top