Search results

If anyone is in need of anything like this, it works great, the connect sense I linked above.

yeah, they would be on the ceiling and I am the only one who will be in there.. but forget it, its not worth it.. I will just get a proper 240 volt strip.

lol, its the 185 1400 pheno of meanwell :) I will do something else, forget the 120 volt power strip idea.. I found a 240 volt power strip on amazon that will work out nicely.

I need to run 3 meanwells off one 240 volt plug. I am curious if I make a cord that plugs into my helios 7 (240 volt plug) and put a normal 120 volt 3 prong socket/plug on the other end and plug a normal 120 volt power strip (so run the power strip at 240 volt). Then I can plug the power cords...

lol... but it is expensive, think I have 1300ish in 80/20 extrusions and 8020 brackets/parts in that cockpit ;)

It is an OSW wheel, made from a servo motor used in robots and cnc machines (kollmorgen servo). It is something similar to a kit like this. http://www.simsteering.com/products.html The steering wheel itself is an actual racing wheel, using quick release mounts like you would use in a race car...

Yep, 8020 is good stuff, expensive as hell though, especially for all the connectors etc. I built my sim rig out of 80/20. I have like 16' of 1.5" 80/20 in the garage still and a bunch of random connectors/corner pieces etc. Here is my light, all wired up! :) Now have to build the 2nd one. I...

No, seems pretty sturdy, I am using 1/8" angle iron (aluminum). Were you using 1/8" thick?

Thanks Dan, I mainly wanted to use the hot glue to keep the connection secure so it would not wiggle loose and short out on the frame. I notice the wire will come out of the connector if wiggled/moved around. I would be securing the wire down in the rail to prevent it from moving but would...

The PPFD based on canopy area, What distance is that referring to anyone know?

Almost finished building one of my lights, this is 40" x 40" Will go over a 4 x 4. Just have to wire it up and test it out. Dan, is there a way to rotate the cob 90 degrees on the heatsink? The way it is now the screw holes in the side of the heatsink for mounting to a frame have it where...

I bought one of these from amazon warehouse, like new, damaged packaging for 64 bucks. basically the same thing that you linked :) https://www.amazon.com/gp/product/B00ISKS8HG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Thanks again Dan, great customer service!

damn...I was afraid of that, I need to check the other 19.

I think I have a bad cob. I have 6 4 cob kits (24 cobs). I just received them today so I just pulled the first 4 out and hooked them up to see how they looked.. I don't get anything but a little bit lit up kinda out of the one. So I took another cob out and tried replacing each cob at a time...

according to this I can use as little as 16 gauge wire for 20' run with 4 cobs at 1.4 amp? This correct before I make a bunch of power cords. Does the meanwell driver require a heavier gauge than that? Also can I use this plug at 240 volt? I know its a 120 volt outlet but would plug the...

Looks like I will have to build my own power cords, I will need approx 20' of cord for 240 volt. What gauge should I be using for that length, each cord will power 4 cobs at 1.4 amp? thanks!

ding dong, 24 3590's at my door just now! :)

Hey all, what device will allow me to remotely monitor temperature and humidity via the internet? thanks!

I can't get my humidity over 50 percent in my sealed room. Need to get it up to 65 or so (VPD). I have a humidifier going in there now, but not large enough to make much of a difference, maybe 5 percent, when the ac kicks on it just takes it back down to 45-50 percent, 55 is about as high as I...