600w Closet DINAFEM POWER KUSH

jondamon

jondamon

Well-Known Member
GrapePhilly&Chronic said:
Im gonna guess 9.8 Oz
Click to expand...
noted.



Some specifics for everyone.

Current res EC1.2, this has not altered in 24hours with the GHE RIPEN and CANNABOOST, i used 2.5ml per litre of the BOOST, and around 3-4ml per litre of the RIPEN .

pH was set yesterday to 5.8 , this had drifted down to 5.3 in 24hours, adjusted today back up to 5.8 .




J
 
jondamon

jondamon

Well-Known Member
Hey everyone,

Well its 2am here in the UK, about 20mins ago i went to check on my room, only to discover that 1 of my colas on the stocky plant has FUCKING BUD MOULD , i have removed more than just the effected part and salvaged what i could (2g) from a possible +14g bud. I then washed my hands etc and went to inspect more thoroughly,

Thankfully no more visible, i will keep my eyes open for any more. I think to help eliminate this problem on future grows i will have to add more oscilating fans at all sides of the closet.


I have taken some pics as best i can to show everyone, I will upload them tomorrow as im off to bed.




J
 
kevin murphy

kevin murphy

New Member
hope u get it sorted lad...
jondamon said:
Hey everyone,

Well its 2am here in the UK, about 20mins ago i went to check on my room, only to discover that 1 of my colas on the stocky plant has FUCKING BUD MOULD , i have removed more than just the effected part and salvaged what i could (2g) from a possible +14g bud. I then washed my hands etc and went to inspect more thoroughly,

Thankfully no more visible, i will keep my eyes open for any more. I think to help eliminate this problem on future grows i will have to add more oscilating fans at all sides of the closet.


I have taken some pics as best i can to show everyone, I will upload them tomorrow as im off to bed.




J
Click to expand...
 
jondamon

jondamon

Well-Known Member
Beansly said:
How the hell did you get mold in that room? Is the humidity high where you live?
Click to expand...
Im trying to figure that one out myself beanz. THe humidity of the room has been within perfect conditions. Lowest 45% during lights on HIghest 65% dark cycle.

The only reason i am leaning towards with this problem was that, to be honest its a little too crowded in there and i havent got any air circulation at that back end. SO i have since added a 6inch clip on fan to the tray of the WILMA pointing straight up in between all the plants from the top of the pots up through the canopy.


Update coming up.



J
 
jondamon

jondamon

Well-Known Member
Hey folks

Well what a fucking nightmare ive had over the last 20hours or so.

As you can see from the pictures of the BUD that has been chopped from the plant there is a dark (different colour) part of the bud in the centre this is where the mould was found. IT had taken over roughly 1inch X 2inch long area in the centre of the bud which was around 4inches wide and 8inches long.

I inspected all of the plants quite thoroughly last night and havent since found any more problems. So today i have Had a small defoliation session with a good friend, whom you may remember from my motherbox build thread, MR P DOWNWARD, and we have stripped alot of the large leaves from the centres of where the plants all meet. Creating more air between the plants. I have also fitted a 6inch clip on fan to the tray of the WILMA which points directly up through the canopy now.

I have also ceased the 3 feedings during the dark cycle to reduce how much moisture is present in the air. As each of the plants came out of the wilma for a hair cut they got sprayed down with ROT STOP from my local hydro shop, this is supposed to stop BOTYTRIS in its tracks, better safe than sorry.

Current REs Stats, EC rising slightly to 1.4, ph drifting from 5.8-5.3 still using just the RIPEN and the BOOST. I will be topping up the WILMA with just plain water with BOOST no RIPEN tomorrow to bring the pH up and the EC down, rather than using any acids etc unnecessarily.

I have arrowed the BUD in question which i had to chop off for you to see.


ANyway hope you like the pics from my fucked up evening. lol.



J
 

Attachments

jondamon

jondamon

Well-Known Member
Hey folks

Well i have been and taken some better pictures of the closet for you all.

I hope you enjoy them, current RES statistics are EC 1.1 pH 5.8 still using RIPEN and BOOST.

End of flowering week8 will be Sunday. I doubt they will be ready on sunday maybe the following sunday is more optimistic.




Enjoy


J
 

Attachments

D

DinafemHashPlant

Active Member
Thats a bummer bro..I got hit with bud rot or mold my last grow after i did final flush lost a good oz of 3 plants it sucked...I feel for ya hopefully no more
 
jondamon

jondamon

Well-Known Member
DinafemHashPlant said:
Thats a bummer bro..I got hit with bud rot or mold my last grow after i did final flush lost a good oz of 3 plants it sucked...I feel for ya hopefully no more
Click to expand...

I feel your pain bro. I lost around 1/2oz from just the 1 cola it had infected, BUt i have done some serious leaf pruning to free up the space in the centre of the wilma and now also blow a 6inch clip on fan straight up through the canopy. Havent seen any more ROT yet but then i am using the ROT STOP liquid at 5-7 day intervals now. It can be used right up to harvest.


J
 
jondamon

jondamon

Well-Known Member
kevin murphy said:
hope it getts better mate but there sum nice colas pal..very nice...
Click to expand...
Cheers Kev,


I'm monitoring them all very closely now.


The colas have also began to swell up now, for instance "THE BEAST" cola is really piling on the weight and filling in alot more. As you can see in the pic its about 10inches long and about 5 or 6inches wide, pistils are beginning to amber off now.


More to the point i am currently sampling the 2g i managed to save, It has ben drying since monday and to be fair is pretty good lol, gonna be ALOT better after its allowed to finish dry/cure.... I am SOOOOO pleased i chose this strain for myself.



J
 
You must log in or register to reply here.
Top