Blumats. Who's using them?

Rookieoftheyr said:
I did the blumat classics. I started them a week before I left(for 5 days) to verify they were working and try to adjust height of rez to proper height. I still watered lightly till I left. They seemed to work in keeping them alive. But they weren’t happy when I came back. Rez was practically empty. I prefer to water by hand as needed over constant water, seems I get quicker growth. Moral of my story is they work if you do it right. I probably needed a bigger rez and have it up higher. I’ll use them again for when I travel.
Click to expand...
Dec 17
IMG_20211217_185944.jpg
Dec23
IMG_20211223_220901.jpg
Dec 27
IMG_20211227_200202.jpg
Jan 1
IMG_20220101_192002.jpg

Im getting great growth. Only watered by hand twice since planted and only 2ltr each of microbial mass
 
I checked my plants today and they look fine. Thankfully no lost leaves or anything. I'm reconsidering this tiny pot setup because that was too close to an all out loss. I'm sure all would have been fine if I were using regular sized pots. Mine get sucked dry in like 6 hours at this point.
 
They're perfect. Other than the fact they leak the yellow dye off the filter. Fuck. Gona check that link for some adapters
 
Jjgrow420 said:
They're perfect. Other than the fact they leak the yellow dye off the filter. Fuck. Gona check that link for some adapters
Click to expand...
Can you reuse those little ones?
This big ones I got from sustainable you can take them off and clean the screen and bowl and slap it back on.
 
JustBlazin said:
Can you reuse those little ones?
This big ones I got from sustainable you can take them off and clean the screen and bowl and slap it back on.
Click to expand...
I can't open it. They're fucked anyways.
I literally have the same filter as they sell at sustainable just don't have the 1/2" to blumat 8mm
 
Here's the site to buy alternative fittings to blumats, I just found it on the other thread.
I believe you want a 1/2 to 3/32 fittings

www.kentsystems.com

KENT Systems

KENT Systems has quick couplings and quick disconnects, tube fittings, plastic, flexible tubing, media bags, medical luer fittings, flexible packaging, fitments, flexible packaging fitments, and pouch fitments.
www.kentsystems.com
 
JustBlazin said:
Here's the site to buy alternative fittings to blumats, I just found it on the other thread.
I believe you want a 1/2 to 3/32 fittings

www.kentsystems.com

KENT Systems

KENT Systems has quick couplings and quick disconnects, tube fittings, plastic, flexible tubing, media bags, medical luer fittings, flexible packaging, fitments, flexible packaging fitments, and pouch fitments.
www.kentsystems.com
Click to expand...

3/32?

The filter will be connected to the 8mm tubing

I'm using one of these which takes 3/8" ID tubing
inlinefilter.jpg

A 3/8" to 1/4" reducer works fine to connect the 8mm line to the 3/8" line.
Available on Amazon $8/4-pack
 
Last edited:
Jjgrow420 said:
I can't open it. They're fucked anyways.
I literally have the same filter as they sell at sustainable just don't have the 1/2" to blumat 8mm
Click to expand...
Why do you need the 1/2 inch to 8mm?
Can't you just run the 1/2 instead of the 8mm? then just punch holes in the 1/2 inch line and push in some 3/32 barbs, that's what I saw people were doing on icmag
 
JustBlazin said:
Why do you need the 1/2 inch to 8mm?
Can't you just run the 1/2 instead of the 8mm? then just punch holes in the 1/2 inch line and push in some 3/32 barbs, that's what I saw people were doing on icmag
Click to expand...
I need the adapter because the filter just has 1/2" threads. I could do it the other way I suppose just not ideal
 
1/2" threaded to 1/4" barb connectors exist. If not at Amazon, certainly McMaster-Carr.
You can get the filter I pictured with a barbed connection for ~ $8 and use a 3/8 to 1/4 barbed reducer
 
Billy the Mountain said:
1/2" threaded to 1/4" barb connectors exist. If not at Amazon, certainly McMaster-Carr.
You can get the filter I pictured with a barbed connection for ~ $8 and use a 3/8 to 1/4 barbed reducer
Click to expand...
Lol. I know man
I have the filters. I can't find the reducers. I'm in Canada. Duno what McMaster car is. Can't find them on amazon. I know exactly what I need but I just can't find the right thing
 
Jjgrow420 said:
Lol. I know man
I have the filters. I can't find the reducers. I'm in Canada. Duno what McMaster car is. Can't find them on amazon. I know exactly what I need but I just can't find the right thing
Click to expand...

www.mcmaster.com

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.
www.mcmaster.com www.mcmaster.com
 
You must log in or register to reply here.
Back
Top