bodhi seeds

Amos Otis

Well-Known Member
For me not worrying about rippers alone is adding years to my life. Wake up to a ripped crop of around six pounds of NYCD and I promise you will cry like a baby. Been there not going back. Much prefer this as a hobby.
I've been extremely disheartened by the loss of one fine looking girl that became a tranny @ 5 weeks. 6 lbs would surely induce tears...then body bags [ j/k]
 

Flaming Pie

Well-Known Member
Mothers milk & her kin
View attachment 3391436
Seen spots of pm,so she got the chop
View attachment 3391437
Green cure. It works great. Kills on contact and creates a high ph environment that molds cannot survive.

It is a potassium bicarbonate.

http://www.ecofruit.net/2010/60_SC_M_Wenneker_J_Kanne_S366bis370.pdf

Abstract Powdery mildew (Sphaerotheca mors-uvae) severely infects young shoots, stems and fruits of gooseberry (Ribes uva-crispa). Environmental friendly and biological control measures are being sought throughout the world. Especially in organic gooseberry growing effective control measures are needed, because powdery mildew infections may result in a total loss of the crop. In a field trial the effect of potassium bicarbonate (Armicarb) on powdery mildew of gooseberry was evaluated. Four treatments; i.e. two preventive strategies and two curative strategies, were applied. Plants were sprayed until runoff. The percent of infected berries, shoots and disease severity were assessed. Very high disease incidences were observed in the untreated control. All potassium bicarbonate treatments significantly reduced the powdery mildew severity in leaves and fruits compared to the untreated controls. The preventive strategies were very successful. However, the number of spray applications was high.
 

Al Yamoni

Well-Known Member
I will tell you this shit is TASTY and rivals a good shatter. If only it was able to be produced in large amounts. me nah fux wit solvent extractions so this is perfect for me.

View attachment 3393694
View attachment 3393696
View attachment 3393697
View attachment 3393698
View attachment 3393695
That looks awesome. I tried the whole rosin thing a bunch of times but I didn't get anything nearly as tasty as the other methods I use. Or as plentiful. Nothing smoothes over my pain like a fat dab.
 

Al Yamoni

Well-Known Member
Gotta admit, nothing looks more awesome than a slab of shatter and you only get that by peeling away the mat. I was a tad shocked at the info I got though. Forsaking my slabs for safety sake and sticking to scraping off crystals instead myself. Can be a bit messy but I quite enjoy it... crunch crunch crunch lmfao... Anyhow just for interests sake and also because I feel we all need to pass this info around far and wide: http://skunkpharmresearch.com/spraying-butane-directly-on-silicone-mats/
Those guys over at skunkpharm are no joke. Only place I get my bho info for sure
 

thenotsoesoteric

Well-Known Member
One of my rock and roller buddies made friends with a cat that has supposedly developed his own method for making wax, I guess he is even working on the patent. The guy is supposed to be heading out to Cali soon to start his business and he is going to stop up here in the pacific northwest to show me what's up. My buddy that is friends with him is less than knowledgeable about wax making but from what I'm told there is no butane involved. Not sure, talk is cheap but if this chemist isn't bullshitting it ought to be a good way to use trimmings from this summer's harvest. That is if this dude comes through, I've smoked some of his daps and they were good, so hopefully he ain't full of shit.
 

MrEDuck

Well-Known Member
One of my rock and roller buddies made friends with a cat that has supposedly developed his own method for making wax, I guess he is even working on the patent. The guy is supposed to be heading out to Cali soon to start his business and he is going to stop up here in the pacific northwest to show me what's up. My buddy that is friends with him is less than knowledgeable about wax making but from what I'm told there is no butane involved. Not sure, talk is cheap but if this chemist isn't bullshitting it ought to be a good way to use trimmings from this summer's harvest. That is if this dude comes through, I've smoked some of his daps and they were good, so hopefully he ain't full of shit.
My guess would be he's using supercritical CO2 to do the extraction. Sadly you need a pretty pricey setup for that.

Those guys over at skunkpharm are no joke. Only place I get my bho info for sure
They're awesome. It's wonderful to have knowledgeable people actually doing testing and working to educate the masses.
 

thenotsoesoteric

Well-Known Member
My guess would be he's using supercritical CO2 to do the extraction. Sadly you need a pretty pricey setup for that.


They're awesome. It's wonderful to have knowledgeable people actually doing testing and working to educate the masses.
Possibly but i think it maybe something else. My buddy couldn't really describe the process properly but no mention of it being costly or having a need for expensive equipment. I'll have to get this guy's email and see if he'll fill me in a little better. I'll chime back when I find more out.
 

Mad Hamish

Well-Known Member
My guess would be he's using supercritical CO2 to do the extraction. Sadly you need a pretty pricey setup for that.


They're awesome. It's wonderful to have knowledgeable people actually doing testing and working to educate the masses.
I saw pics of the setup over at Green Dot Extraction Labs in Cali... CO2 extraction and like you say they have some serious looking gear around. Looks like it fell out of a TV show with all that stainless steel. No idea what was happening in there all I know is you are not building that using pocket money. Looked like a mortgage went into building it.
 

MrEDuck

Well-Known Member
Possibly but i think it maybe something else. My buddy couldn't really describe the process properly but no mention of it being costly or having a need for expensive equipment. I'll have to get this guy's email and see if he'll fill me in a little better. I'll chime back when I find more out.
Now I'm really curious.

I saw pics of the setup over at Green Dot Extraction Labs in Cali... CO2 extraction and like you say they have some serious looking gear around. Looks like it fell out of a TV show with all that stainless steel. No idea what was happening in there all I know is you are not building that using pocket money. Looked like a mortgage went into building it.
That sounds about right. 73 bar is a lot of pressure! But the process has a lot of advantages over butane.
 

bigworm6969

Well-Known Member
Green cure. It works great. Kills on contact and creates a high ph environment that molds cannot survive.

It is a potassium bicarbonate.

http://www.ecofruit.net/2010/60_SC_M_Wenneker_J_Kanne_S366bis370.pdf
greencure only worked for me for a week and it came back so everyweek I had to use it and every time I used it, it fried my pistils and I hate that makes my girls look ugly I even mixed it light and still burned them better then pm I guess I use sulfur burned now maybe once a week for 6 hours and haven't seen pm in over 3 months I also took every plant out my room and cleaned it with bleach water and I added another fan
 

Flaming Pie

Well-Known Member
greencure only worked for me for a week and it came back so everyweek I had to use it and every time I used it, it fried my pistils and I hate that makes my girls look ugly I even mixed it light and still burned them better then pm I guess I use sulfur burned now maybe once a week for 6 hours and haven't seen pm in over 3 months I also took every plant out my room and cleaned it with bleach water and I added another fan
I use one small scoop to 250ml of water once a week. Never burned anything.
 

thenotsoesoteric

Well-Known Member
Now I'm really curious.


That sounds about right. 73 bar is a lot of pressure! But the process has a lot of advantages over butane.
I haven't talked to the Guy yet but my buddy just told me Guy has a $20+ million dollar lab so I doubt if I'll be able to hang with his process, LOL. My lab is short by at least a few million. Supposedly it is high pressure and organic method that is easy-ish, but my buddy is a stoner and basically has little insight to the process so I'll have to wait till dude comes out this summer or maybe hook up through emails. I know now it kind of sounds like I'm an asshole blowing smoke out my arse but I will find out more and give a better description.
 

BadInfluence

Well-Known Member
Hey guys i hope you don't mind if i throw a quick question in here...
We have 2 sunshine daydream girls in week 5 of flower right now and they look really different. Both have the same structure and stretch. One is kinda skinny but very frosty. The buds are still very fluffy. It doesn't smell very strong but when you touch it your fingers smell of root beer and bazooka joe chewing gum. So far it doesn't look like a good yielder.
The other one is producing nice dense heavy buds and has a strong sweet fruity smell with some black pepper in it. It is frosty but not as much as the skinny one. We have cuttings of both but it looks as if the smelly one could be worth keeping for a while.

How many phenos are there and have you seen the ones described? What do your keepers look like?
 

MrEDuck

Well-Known Member
I haven't talked to the Guy yet but my buddy just told me Guy has a $20+ million dollar lab so I doubt if I'll be able to hang with his process, LOL. My lab is short by at least a few million. Supposedly it is high pressure and organic method that is easy-ish, but my buddy is a stoner and basically has little insight to the process so I'll have to wait till dude comes out this summer or maybe hook up through emails. I know now it kind of sounds like I'm an asshole blowing smoke out my arse but I will find out more and give a better description.
Everything you're saying is making me think it's a super critical extraction process and your buddy is messing up the technical details.
 
Top