Bubblelicious Med CFL SOG
- Thread starter EpyxN
- Start date
EpyxN
Active Member
Flowering Day 11
Ok i had to pull all the plants out & thankfully I did since 1 Male was still hiding in the midst of all the lovely ladies, I caught it just in time, the banana's were just poking out but not close to hanging yet. (male was 1" tall so it was no wonder he was hiding in there the lil perv). I will probably end up with a few seeds just because thats what happens when things are going good
Oh well, either way it was caught in time before any real damage could be done. NO MALES ARE IN THE AREA FOR SURE NOW! lol (again this all could have been easier if I would have waited to sex the plants before mass cloning.)
Anyways since I had to remove all the plants I put them back in a little different order (except the back wall, shoot growth was way too good to screw that up.) Anyways heres pics after plants were moved around.
In some of the photo's below the wire can be seen that is being used to hold down growth.
Wire had to be removed in order to move the plants around and then re-screwed in after plants were moved around.
Ok i had to pull all the plants out & thankfully I did since 1 Male was still hiding in the midst of all the lovely ladies, I caught it just in time, the banana's were just poking out but not close to hanging yet. (male was 1" tall so it was no wonder he was hiding in there the lil perv). I will probably end up with a few seeds just because thats what happens when things are going good
Oh well, either way it was caught in time before any real damage could be done. NO MALES ARE IN THE AREA FOR SURE NOW! lol (again this all could have been easier if I would have waited to sex the plants before mass cloning.)Anyways since I had to remove all the plants I put them back in a little different order (except the back wall, shoot growth was way too good to screw that up.) Anyways heres pics after plants were moved around.
In some of the photo's below the wire can be seen that is being used to hold down growth.
Wire had to be removed in order to move the plants around and then re-screwed in after plants were moved around.
Attachments
EpyxN
Active Member
INFO
More wire will most likely be added again tonight to create a screen.
The area being used is less than what is available in the area due to the addition of the new fan. so a reduction in lights has happened. lighting info will follow (area used is less than 2 1/2' sq).
Lighting
6x 26w = 156w / 9,600 lumen's
4x 42w = 168w / 10,400 lumen's
Total: 324w / 20,000 lumen's / 8,000 lumen's per sq ft
Area was initially setup for a SOG but clones were taken when they were too young and took longer to mature than anticipated so area quickly turned into what would resemble a SCROG.
More wire will most likely be added again tonight to create a screen.
The area being used is less than what is available in the area due to the addition of the new fan. so a reduction in lights has happened. lighting info will follow (area used is less than 2 1/2' sq).
Lighting
6x 26w = 156w / 9,600 lumen's
4x 42w = 168w / 10,400 lumen's
Total: 324w / 20,000 lumen's / 8,000 lumen's per sq ft
Area was initially setup for a SOG but clones were taken when they were too young and took longer to mature than anticipated so area quickly turned into what would resemble a SCROG.
EpyxN
Active Member
EpyxN
Active Member
EpyxN
Active Member
INFO
Nutes
Shultz 8-14-9 has been being used (keeping it wally world & MJers) % has been slowly increased and is now @ 4x the recommended dosage (4 droppers full to 1 gal water). Hopefully no burn will occur & if so % will be dialed down to 3 - 3.5x the recommended dosage after a semi flush.
Nutes
Shultz 8-14-9 has been being used (keeping it wally world & MJers) % has been slowly increased and is now @ 4x the recommended dosage (4 droppers full to 1 gal water). Hopefully no burn will occur & if so % will be dialed down to 3 - 3.5x the recommended dosage after a semi flush.
howak47
Well-Known Member
hey man i just posted sum new pics on thread check it out https://www.rollitup.org/hydroponics-aeroponics/205127-zona-mid-aero-cfl-grow-11.html
EpyxN
Active Member
Flowering Day 13
13 pics so be patient for load. some with 1 camera some with another camera lots of the same pics just different angles & camera. Hey gotta do what I gotta do to show the lil ones. Enjoy...
13 pics so be patient for load. some with 1 camera some with another camera
lots of the same pics just different angles & camera. Hey gotta do what I gotta do to show the lil ones. Enjoy...Attachments
howak47
Well-Known Member
nice pics man lookin good!!!!
stop by my thread i just posted sum new pics and just stared new zona plants in aerogarden https://www.rollitup.org/hydroponics-aeroponics/205127-zona-mid-aero-cfl-grow-12.html
stop by my thread i just posted sum new pics and just stared new zona plants in aerogarden https://www.rollitup.org/hydroponics-aeroponics/205127-zona-mid-aero-cfl-grow-12.html
Similar threads
