pinner420
Well-Known Member
Think i should take it up another foot before flipn her.They'd grow just as fast with just the 315w bulb, hell even a couple of E27 household LED bulbs would work at that stage. Serious waste of electricity.
Think i should take it up another foot before flipn her.They'd grow just as fast with just the 315w bulb, hell even a couple of E27 household LED bulbs would work at that stage. Serious waste of electricity.
Grow baby, grow!Think i should take it up another foot before flipn her.
15 ft to the cieling i think a week or so more. Lots of room. Last measured 4 days ago at 23 inches.You got the space for that? How tall right now?![]()
15 ft to the cieling i think a week or so more. Lots of room. Last measured 4 days ago at 23 inches.
Full spectrum for the win!Make note the half getting hit with the 315 is 1/3 farther along than the side with the 600.
Ive had tga gear do the sameYes, it happened on one of my Ripped Bubba plants.
Seen some Sun System 315W 240V been used for 9 months @ 300 bucks each.. Does that sound like a good deal or is it better to just go new for warranty ect on this stuff? Thanks!
Sounds solid to me. 6" fan should be on point.I am still looking for a suggestion on my next project. Before I purchase another 315W I want to make sure it will not be a problem in the tent. Sorry if I have posted these pics in the past but this is the best way to explain my intentions.
I am considering a Stacked (2 - 315W) Vertical 5 Plant Scree grow. I have Vertical experience with a single 400W HPS. Right now I have one 315 and planned on doing a stacked grow with the 315 as the top light and a 400W HPS as the lower light. I believe I can get a good deal on another 315 and if I can I will use two 315's.
I am in a 4x4 tent 7' tall, 6" Max-Fan, three speed, 291 to 420 CFM, inline suction fan beyond the 6" Phrish filter, that is exhausted into the garage, so I believe I have plenty of air movement through the tent. I also have an AC if needed in the room I draw my intake air from. From the lights to the screen I have minimum of 16" and a max of 22". My ballast will be outside the tent so the only heat will come from the lamps themselves. Growing in coco 2 gallon Smart Pots with automated drip irrig. using the BlackHoles emitter.
My question is: Will I have a heat problem with the 2 315W lamps in the tent?
This first photo is of the light stand for the lower light, it is set up for the 400W at present but I can change that to the 315 if I go that direction. If you note the red arrows, I can switch the PVC pipe out to change the height of the lamp. This are 6" rizers in the unit now, can go up to 18", but don't think I will ever need to go over 12".
View attachment 3920304
These are the frames without the net on them, 20 x 40 inch frame, overall height is 54". The 315W that will hang is not in this picture but will hang directly above the bottom lamp.
View attachment 3920303
Pic with the net attached. Note that each individual screen is movable as I stated above, from 16" to 22" from the bulbs.
View attachment 3920307
The fan is not centered on the screen in this pic, but you get the idea.
View attachment 3920308
Thanks in advance!
GR
Could be a bit hot for sure, you gonna have 630W(2150BTU about) of heat in there, i'd suggest a good exhaust and intake system.I am still looking for a suggestion on my next project. Before I purchase another 315W I want to make sure it will not be a problem in the tent. Sorry if I have posted these pics in the past but this is the best way to explain my intentions.
I am considering a Stacked (2 - 315W) Vertical 5 Plant Scree grow. I have Vertical experience with a single 400W HPS. Right now I have one 315 and planned on doing a stacked grow with the 315 as the top light and a 400W HPS as the lower light. I believe I can get a good deal on another 315 and if I can I will use two 315's.
I am in a 4x4 tent 7' tall, 6" Max-Fan, three speed, 291 to 420 CFM, inline suction fan beyond the 6" Phrish filter, that is exhausted into the garage, so I believe I have plenty of air movement through the tent. I also have an AC if needed in the room I draw my intake air from. From the lights to the screen I have minimum of 16" and a max of 22". My ballast will be outside the tent so the only heat will come from the lamps themselves. Growing in coco 2 gallon Smart Pots with automated drip irrig. using the BlackHoles emitter.
My question is: Will I have a heat problem with the 2 315W lamps in the tent?
This first photo is of the light stand for the lower light, it is set up for the 400W at present but I can change that to the 315 if I go that direction. If you note the red arrows, I can switch the PVC pipe out to change the height of the lamp. This are 6" rizers in the unit now, can go up to 18", but don't think I will ever need to go over 12".
View attachment 3920304
These are the frames without the net on them, 20 x 40 inch frame, overall height is 54". The 315W that will hang is not in this picture but will hang directly above the bottom lamp.
View attachment 3920303
Pic with the net attached. Note that each individual screen is movable as I stated above, from 16" to 22" from the bulbs.
View attachment 3920307
The fan is not centered on the screen in this pic, but you get the idea.
View attachment 3920308
Thanks in advance!
GR
I'd go with stacking 2 next to each other. That way you can have the footprints from all 4 lights overlapping for maximum effect. It will leave you with about a foot of unused space on each end of the tent, but growth, and yield from that center 6x4 area will be amazing.So my lights came. How should I arrange them in a 4x8? All in a row or stack 2 next to each other?
Hot blond ass under blurple... happy Friday View attachment 3920562
'please no cameras no cellphones'Hot blond ass under blurple... happy Friday View attachment 3920562