billcollector99
Well-Known Member
It sucks just as bad going the other way too bru. 80lbs in a year, and all your clothes look like dresses, lol.
Club 600
- Thread starter DST
- Start date
It sucks just as bad going the other way too bru. 80lbs in a year, and all your clothes look like dresses, lol.
billcollector99
Well-Known Member
What exactly does the pvc do to the butane??
Don Gin and Ton
Well-Known Member
other way round butane corrodes the plastic n makes carcinogenic gas apparently
jigfresh
Well-Known Member
I've been reading up on BHO lately too. From what I read stainless steel is the only great material to use. One guy I saw uses copper pipe, but that seems sketchy to me with the corrosion possible. Some people use PVC, you would have to ask the guy at the diy for pvc to be used for watering a garder using strong pesticides and fertilizers and you want to make sure the PVC will be safe and not have any bad chemicals leached by the chemicals inside.
Someone posted on the 600 I beleive that uses a big Mag light torch. Cut the torch end off below the button hole, then drill a hole in the battery cap end for the butane and voila... extraction tube (or whatever you call them).
Apparently at a couple store here in the us (walmart, bed bath & beyond) sell stainless steel turkey basters that work perfectly. I'm off to buy mine today. Want me to get one for you and ship it over? Let me know bru, wouldn't mind a bit.
EDIT: Here's the thread I've found usefull for BHO: https://www.rollitup.org/toke-n-talk/413954-how-butane-honey-hash-oil.html
Don Gin and Ton
Well-Known Member
hahahahA i was just in there posting the same Q. I saw the maglight one n thought thats a sweet idea but maglights are pricey to buy one and just kill it lol. Jig your a sound man! but im going to go with a little bigger than the baster. I had a honey b and the only bit that pissed me off was having to reload the thing. i live in a flat and doing the whole thing outside is pretty unstealthy.
thanks for the reply jiggy +rep
thanks for the reply jiggy +rep
rosecitypapa
Active Member
'sup c600!
Just finished out a multi-strain vertical 600 in a 4' x 4', flipped when plants were 9"-10".
untopped SSH
Final yield ~> 400gms
First time I've done vertical and won't look back.
Just finished out a multi-strain vertical 600 in a 4' x 4', flipped when plants were 9"-10".
untopped SSH
Final yield ~> 400gms
First time I've done vertical and won't look back.
Don Gin and Ton
Well-Known Member
like the panoramic pic too man. good job
billcollector99
Well-Known Member
ahh fuck, guess imma get cancer then...
Don Gin and Ton
Well-Known Member
lmao got to go out one way or the other man 
Don Gin and Ton
Well-Known Member
3 of my 6 plants cut early at 7 weeks due to a move.
firstly props! secondly, where does the dog sleep ?
shnkrmn
Well-Known Member
Just to contribute to the bulb convo, I use Sunmasters and have never burned out a bulb. I do replace them every two years though, I mark them with the date of installation on the hood. I recently bought a Digilux 1000W intended for use with digital ballasts and I must say, it kicks ass; whitest HPS light I've ever seen. The are comparable in price to the Sunmasters too.
duchieman
Well-Known Member
I'm not ruling out trying a higher end bulb, just not yet. I'd like to hear how that Digilux bulb works out for you shnkrmn, in comparison to the Sunmaster over the long run.
In regards to what I'm doing with my first trim, you guys rocked it with the ideas and I decided to do ISO oil. Can't get Everclear in my province, but in another I have a line that may get me some. I'm saving the hash run for some proper screen material. I gave it a quick shot with what I had and wasn't happy, thus the ISO decision. Not thrilled with the idea but it's not like I've never smoked it before.
Well, back to the grind.
In regards to what I'm doing with my first trim, you guys rocked it with the ideas and I decided to do ISO oil. Can't get Everclear in my province, but in another I have a line that may get me some. I'm saving the hash run for some proper screen material. I gave it a quick shot with what I had and wasn't happy, thus the ISO decision. Not thrilled with the idea but it's not like I've never smoked it before.
Well, back to the grind.
duchieman
Well-Known Member
I don't think you need that much to keep a mum 3eyes, but if I were to run that much I would go with the MH. But again, I don't think you need that much, and think half that would work well, so I would go CFL. I keep my males going under 3 26W cfls and they do great. No reason vegging girls can't do the same. Again, just how I see it.
Duchie
3eyes
Well-Known Member
I don't think you need that much to keep a mum 3eyes, but if I were to run that much I would go with the MH. But again, I don't think you need that much, and think half that would work well, so I would go CFL. I keep my males going under 3 26W cfls and they do great. No reason vegging girls can't do the same. Again, just how I see it.
I've been using the same 125w CFL for about 6 years now but i need to grow my mams quicker so i can take a load of cuts so i thought why not replace it with a bigger wattage
ghb
Well-Known Member
cfls are good for keeping mums alive,they are just too slow though, mh is quality but you had better prune your mother from time to time. depends how many mums and how many cuts you want. i currently keep two bushy mums under 375w of cfl, about 10 days before cutting them iwill bang in the 400mh to give a bit of stretch, cfl nodes are too tight together for my liking
Gastanker
Well-Known Member
haha. That's actually a laundry hamper but I have a rabbit hutch in the other room that's near identical. I'll be using it to dry the other plants
jigfresh
Well-Known Member
Hey 600 crew. Lots of love out to whole group. Just wanted to share that I got me a package at the p.o today. I must say, I'm very impressed with Fdd's glass work. Real real nice. Thanks again to COF and I guess DST get's a little credit too, lol.
I ended up ordering a Glass BHO tube to extract my goodness. Should be here on Fri or Sat. Can't wait to show the 600 my first Honey oil. I'm stoked.... mmmmmmmmmmm. Also going to make some butter around the same time. Have some goodies to eat.
The pipe is real nice, but I really love the end. It's like this eye or something cool. Much props to fdd. (kinda hard to say, lol)
I ended up ordering a Glass BHO tube to extract my goodness. Should be here on Fri or Sat. Can't wait to show the 600 my first Honey oil. I'm stoked.... mmmmmmmmmmm. Also going to make some butter around the same time. Have some goodies to eat.
The pipe is real nice, but I really love the end. It's like this eye or something cool. Much props to fdd. (kinda hard to say, lol)
DoobieBrother
Well-Known Member
Sure is purty, jig!
Like you're holding an ocean wave in your fingertips... cool, tasty waves of smoky goodness...
Congrats!
Like you're holding an ocean wave in your fingertips... cool, tasty waves of smoky goodness...
Congrats!
Similar threads
