LilT211
Well-Known Member
Thanks in advance to all who are willing to help here.
Ok first things first. I am looking into upgrading my 5x5x7 grow tent (flowering tent) it is currently powered by a 600w hps atm. I had a 6" AA 400cfm fan pulling thru a Phresh filter and my a/c reflector
Filter/I. D./hood/I. D. Fan out of tent.
The fan was positioned on top of the tent and vented the hot air into the bedroom. I want to step up to a 1000 watt but only wanted to run one fan. I went out and bought a Complete Greenhouse Controller from C.A.P. but now i think i have just bought a useless item. My dilemma is this... if i set the controller to 75 when the lights go off the fan may not pull enough to clean the air. ( its 70-72 degrees in the room where the tents are). How do I cool the 1000 watter and clean the air using the controller? I wouldn't be pressed to use it but I'm going on vacations in the near future and want a little pom while I'm away. Wanna go automated.
That brings me to my next issue... I have been research ucdwc systems on this and other forums. Still have some questions. I can't seem to find/figure out where everyone the 2" to 3/4" PVC Tee to for the return lines?
I do not have an aqua chiller but i am willing to buy one... i haven't seen many ucdwc do good without them imho. any suggestions on brands? epoplus or active aqua? My whole goal is to run 4 plant site, one control bucket, and a reservoir with a chiller. How did you guys decide which chiller worked best for you?
I know to get a mag drive pump. amazon has danner 500gph and 700gph 6 dollar difference, is more water better here?
My budget for the whole thing is 800 bucks for the light, chiller the ucdwc components. Am i being reasonable? Worse case scenario i keep the 600w?
Ok first things first. I am looking into upgrading my 5x5x7 grow tent (flowering tent) it is currently powered by a 600w hps atm. I had a 6" AA 400cfm fan pulling thru a Phresh filter and my a/c reflector
Filter/I. D./hood/I. D. Fan out of tent.
The fan was positioned on top of the tent and vented the hot air into the bedroom. I want to step up to a 1000 watt but only wanted to run one fan. I went out and bought a Complete Greenhouse Controller from C.A.P. but now i think i have just bought a useless item. My dilemma is this... if i set the controller to 75 when the lights go off the fan may not pull enough to clean the air. ( its 70-72 degrees in the room where the tents are). How do I cool the 1000 watter and clean the air using the controller? I wouldn't be pressed to use it but I'm going on vacations in the near future and want a little pom while I'm away. Wanna go automated.
That brings me to my next issue... I have been research ucdwc systems on this and other forums. Still have some questions. I can't seem to find/figure out where everyone the 2" to 3/4" PVC Tee to for the return lines?
I do not have an aqua chiller but i am willing to buy one... i haven't seen many ucdwc do good without them imho. any suggestions on brands? epoplus or active aqua? My whole goal is to run 4 plant site, one control bucket, and a reservoir with a chiller. How did you guys decide which chiller worked best for you?
I know to get a mag drive pump. amazon has danner 500gph and 700gph 6 dollar difference, is more water better here?
My budget for the whole thing is 800 bucks for the light, chiller the ucdwc components. Am i being reasonable? Worse case scenario i keep the 600w?

Last edited: